• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.779-788
• /
• 2014

The satellite should generate electric power efficiently to perform the mission successfully within limited power. For this reason, the electrical power system of LEO satellites usually regulates the power which is generated from the solar cells using MPPT (Maximum Power Point Tracking) method. This paper proposes advanced MPPT algorithm based on the fuzzy logic applied to small CubeSat satellite. The simulation has been performed to confirm the validity of the proposed method by interlocking between MATLAB/Simulink and STK (Systems Tool Kit). The EBA(Energy Balance Analysis) has also been performed at two different pointing modes of KAUSAT-5 for solar irradiation according to the satellite orbit and attitude, and load capacity varied with operation modes by Simulink and STK. The performance of fuzzy logic-based MPPT algorithm was verified through the EBA. The validity of the proposed MPPT algorithm based on the fuzzy logic was also confirmed by comparing with P&O (Perturbation & Observation) algorithm that is general in the MPPT.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.9
• /
• pp.807-817
• /
• 2012

An optical payload needs to be validated its image performance after launched into orbit. The image performance was validated by observing star because ground site contains uncertainties caused by atmosphere, time of the year, and weather. Time Delayed and Integration(TDI) technique, which is mostly used to observe the ground, is going to be used to observe the selected stars. A satellite attitude scenario was also developed to observe the selected stars. The scenario is created to enable TDI to operate. Rotation angles of optical payload are determined in order for the selected stars to properly be passed at a desired angular velocity about rotation axis. The result of this research can be utilized to validate the quality of optical payload of a satellite in orbit. In addition, a quaternion for pointing selected stars is calculated minimizing the path from a given arbitrary attitude of satellite.

• Korean Journal of Remote Sensing
• /
• v.25 no.2
• /
• pp.133-143
• /
• 2009

This paper describes differences of performance when the orbit attitude model is applied to the respective images obtained from two different types of satellite. The one is Spot that rotates its pointing mirror and the other is Kompsat-2 that rotates its whole body when they obtain imagery for target. Our research scope is limited to the orbit-attitude model only as its good performance was proved in prior investigation. Model performances between two images were compared with sensor model accuracy and 3D coordinates calculation. The results show performances of the orbit-attitude model for each image type were different. For Spot imagery, the model required attitude angle to be included as adjustment parameters. For Kompsat-2 imagery, the model required high-order parameter for adjustment. This implies that satellite sensor model may be applied differently in accordance with platform's attitude control scheme and accuracy. Understanding of this information can be a base for improvement and development of model and application for new satellite images.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.4
• /
• pp.719-731
• /
• 2012

One of the most important point in the Internet crime investigation is tracing back and pointing out a criminal host. However, criminals can forge a crime record stored in the crime host, or can utilize malicious applications in order not to leave a crime record. In addition, criminals can change the source IP address of a crime host and deny their involvement. In this study, we suggests the Network Forensic Evidence Generation and Verification Scheme (NFEGVS) to rectify the current limitation of Network Forensic technologies. This scheme can prove who and when the crime has occurred. In addition, this prevents leaking of symmetric key for guaranteeing certification and integrity of Forensic Evidence by proposing the Timestamp Secret Key Distribution Scheme, and minimizes performance degradation of router when generating forensic evidence with the Flow-Based Selection Scheme. In this paper, we implement the proposed scheme and evaluate overall performance of the proposed system.

• International journal of advanced smart convergence
• /
• v.11 no.4
• /
• pp.96-103
• /
• 2022

This paper presents the analysis of increasing the resolution of True-Time-Delay (TTD) by 0.5-bit for phased-array antenna system which is one of the Multiple-Input and Multiple Output (MIMO) technologies. For the analysis, a 5.5-bit True-Time Delay (TTD) integrated circuit is designed and analyzed in terms of beam steering performance. In order to increase the number of effective bits, the designed 5.5-bit TTD uses Single Pole Triple Throw (SP3T) and Double Pole Triple Throw (DP3T) switches, and this method can minimize the circuit area by inserting the minimum time delay of 0.5-bit. Furthermore, the circuit mostly maintains the performance of the circuit with the fully added bits. The idea of adding 0.5-bit is verified by analyzing the relation between the number of bits and array elements. The 5.5-bit TTD is designed using 0.18 ㎛ RF CMOS process and the estimated size of the designed circuit excluding the pad is 0.57×1.53 mm². In contrast to the conventional phase shifter which has distortion of scanning angle known as beam squint phenomenon, the proposed TTD circuit has constant time delays for all states across a wide frequency range of 4 - 20 GHz with minimized power consumption. The minimum time delay is designed to have 1.1 ps and 2.2 ps for the 0.5-bit option and the normal 1-bit option, respectively. A simulation for beam patterns where the 10 phased-array antenna is assumed at 10 GHz confirms that the 0.5-bit concept suppresses the pointing error and the relative power error by up to 1.5 degrees and 80 mW, respectively, compared to the conventional 5-bit TTD circuit.

• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.174-181
• /
• 2011

An airborne sensor is developed for remote sensing on an aerial vehicle (UV). The sensor is an optical payload for an eletro-optical/infrared (EO/IR) dual band camera that combines visible and IR imaging capabilities in a compact and lightweight package. It adopts a Ritchey-Chr$\'{e}$tien telescope for the common front end optics with several relay optics that divide and deliver EO and IR bands to a charge-coupled-device (CCD) and an IR detector, respectively. The EO/IR camera for dual bands is mounted on a two-axis gimbal that provides stabilized imaging and precision pointing in both the along and cross-track directions. We first investigate the mechanical deformations, displacements and stress of the EO/IR camera through finite element analysis (FEA) for five cases: three gravitational effects and two thermal conditions. For investigating gravitational effects, one gravitational acceleration (1 g) is given along each of the +x, +y and +z directions. The two thermal conditions are the overall temperature change to $30^{\circ}C$ from $20^{\circ}C$ and the temperature gradient across the primary mirror pupil from $-5^{\circ}C$ to $+5^{\circ}C$. Optical performance, represented by the modulation transfer function (MTF), is then predicted by integrating the FEA results into optics design/analysis software. This analysis shows the IR channel can sustain imaging performance as good as designed, i.e., MTF 38% at 13 line-pairs-per-mm (lpm), with refocus capability. Similarly, the EO channel can keep the designed performance (MTF 73% at 27.3 lpm) except in the case of the overall temperature change, in which the EO channel experiences slight performance degradation (MTF 16% drop) for $20^{\circ}C$ overall temperate change.

• (The) Research of the performance art and culture
• /
• no.19
• /
• pp.35-60
• /
• 2009

I insisted that the structure should be set newly, pointing out problems in a structure of the big gut, Jain dano je in this paper. Although, the big gut is playing now in Jain dano je, the features of gut geo-ri are vague ; that's why gut geo-ri and performances are entangled. Therefore, the gut geori showing strange structures not fitted with korean shamanist custom is playing these days like Pawangbyeolhui and Eoudong geori. The detailed procedure is also awkward. It is mixed with aspects of shaman custom in each region, instead showing features of regions. What's more, it became a dance drama, not gut geo-ri with several shamans dancing in a gut. Overcoming these problems, the big gut will be a cultural asset. Therefore, when considering the structure of korean gut, we will fit the order of gut geo-ri into the system of divine spirits keeping a plot-opening, developing and closing. It should be a gut geori-oriented play with only gut geo-ri things. Gut should be gone forward main shaman-oriented gut, setting up a main shaman who takes charge of each gut geo-ri. We should find out a new shaman who knows gut of Gyeong sang province well, if shaman who now takes charge of it has a problem. The big gut of Jain dano je became a part of intangible cultural assets. The performance is not a subject of curiosity and people's interests any more as it was in a past. It should be a traditional performance of representing our traditional culture. We should reorganize an epochal gut geo-ri after reexamining gut geo-ri which has played so far.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.196-206
• /
• 2012

AESA radar is able to instantaneously and adaptively position and control the beam, and such adaptive beam pointing of AESA radar enables to remarkably improve the multi-mission capability, compared with mechanically scanned array radar. AESA radar brings a new challenges, radar resource management(RRM), which is a technique efficiently allocating finite resources, such as energy and time to each task in an optimal and intelligent way. Especially radar beam scheduling is the most critical component for the success of RRM. In this paper, we proposed stochastic radar beam scheduling algorithm using simulated annealing(SA), and evaluated the performance on the multi-function radar scenario. As a result, we showed that our proposed algorithm is superior to previous dispatching rule based scheduling algorithm from the viewpoint of beam processing latency and the number of scheduled beams, with real time capability.

• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.49-57
• /
• 2004

In This paper the embedded linux based embedded control system was used and the tracking antenna system was studied for data link and communication between moving vehicles. A microprocessor based embedded controller is equipped with SA-1110 board and this embedded controller can control the azimuth and the elevation angle of the antenna. The relative position and attitude for pointing are calculated by using the GPS position signals from the moving vehicle. To verify the performance of the designed embedded antenna system, the orbit information of the Arirang satellite(from KARI) is used.

• Journal of Korea Port Economic Association
• /
• v.29 no.2
• /
• pp.239-253
• /
• 2013

Changes of a port's market share in the exports of domestic ports result from many interrelated factors. Therefore, the analysis of the export performance of a port should be put in perspective by analysing long periods to identify trends. This paper aims to show the development of competitiveness, product and geographical structure of the Busan Port's merchandise exports from 1995 to 2012 using constant-market shares (CMS) analysis. This article is relevant for Busan port because its export market shares have been showing disappointing path. The dynamic consideration of the CMS analysis, which the static indicators have been replaced by time series, helps to track all changes in the export structure and competitiveness of the Busan port over time. The long-term trend of the indicators suggests that it may be very hard for the Busan port to maintain its market share in the global environment. The advantage in competitiveness of the Busan port has vanished and the product and geographical structure effects show negative trends after 1995, pointing to vulnerability in the Busan port's exports.