• Journal of Electrical Engineering and Technology
• /
• v.1 no.2
• /
• pp.200-210
• /
• 2006

This paper proposes the motion generation method in which the movement of the 3-links leg subsystem in constrained to slider-link and a singular posture can be easily avoided. This method is the realization of jumping control moving in a vertical direction, which mimics a cat's behavior. To consider the movement from the point of the constraint mechanical system, a robotics system for realizing the motion will change its configuration according to the position. The effectiveness of the proposed scheme is illustrated by simulation and experimental results.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.2052-2056
• /
• 2015

This Paper analyzes the characteristics of the WRSM in high-speed operation range. To verify the control characteritics of various WRSM models, the relative position of the central point of current limit circle and voltage limit ellipse is defined as M value and 3 models according to M_max value are designed through inductance change. Through the designed models, the current control method of 3-variables control for maximum power especially in high-speed operation range is presented.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1023-1026
• /
• 2007

CBTC (Communication Based Train Control) is a railroad system, using wireless communication for data transmission between on-board units and ground units, that makes ground computer periodically collect position and speed data from each train and transmits the preceding train's distance data up to speed limit point so as to make on-board control unit control the optimum train speed. Due to the fact that wireless communication system for train control employs only limited frequency band and output frequency, a number of ground communication units should be installed at track-side; also a running train should carry out Handover function which maintains the communication by accessing a new communication channel of the adjacent on-board communication units in accordance with the output of received radio wave. Especially CBTC is largely dependent on Handoff function between ground communication units. Therefore, this paper provides the method of identification of hazard between ground communication units and on board units.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.395-398
• /
• 2001

In this paper, we consider to apply of 2-DOF (Degree of Freedom) PID controller at D.C servo motor system. Many control system use I-PD, PID control system but the position control system have difficulty in controling variable load and changing parameter. We propose neural network 2-DOF PID control system haying feature for removal disturbances and tracking function in the target value point. Experiment result for 2-DOF PID controller with neural network are illustrated.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.555-557
• /
• 2006

This paper represent improved On-line Turn off Angle control schemes for switched reluctance motors based on current control. For the purpose of the finding optimal commutation switching angle point, it is utilized him on and turn off position calculation with inductance vs. current vs. flux linkage analysis method. The goal of proposed paper is the maximization of the energy conversion per stroke and maximizing efficiency and obtaining approximately flat-topped current waveform. The proposed control scheme is demonstrated on a prototype experimental system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.3
• /
• pp.81-88
• /
• 1997

This paper dealt with the position control of a flexible miniature finger driven by piezoelectric bimorph cells, cemented on both side of the finger. Bending moments generated by cells drives the finger, and end-point of the finger is controlled, so as to move in synchrony with fluctation of target and maintain a constant distance between target surface and inger's tip. The voltage applied for the cell is controlled by tip displacement error and error rate. We proposed a PD-Fuzzy controller under conception of PD control strategy. It brought and advantage which reduce number of rules than that of same type conventional fuzzy system and more correct redponse than PID control results.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1061-1062
• /
• 2006

This paper represent improved On-line Turn off, commutation Angle control schemes for switched reluctance motors based on current control. For the purpose of the finding optimal commutation switching angle point, it is utilized turn on and turn off position calculation with inductance vs. current vs. flux linkage analysis method. The goal of proposed paper is the maximization of the energy conversion per stroke and maximizing efficiency and obtaining approximately flat-topped current waveform. The proposed control scheme is demonstrated on a simulation experimental result.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1273-1275
• /
• 2005

This paper presents design of speed control system for slot less iron-cored PM linear synchronous motor using space vector PWM. the design must be considered by the useable limits of the DC link voltage and dynamic operating rage as well as the characteristics of design parameters in a point of system. Therefore, in this paper, the permissible operating range of manufactured motor by determination of rate speed and rate thrust according to switching scheme of DC link voltage are offered. The vector control requires information about rotor position. And we can need to the Hall sensor for sampling current. In order to agree with this purpose, Digital Signal Processor(TMS320F240x) developed for implementation of a speed Field Oriented Control.

• The Journal of Korea Robotics Society
• /
• v.19 no.1
• /
• pp.8-15
• /
• 2024

This paper proposes a linear model predictive control of 6-DOF remotely operated underwater vehicles using nonlinear robust internal-loop compensator (NRIC). First, we design a integrator embedded linear model prediction controller for a linear nominal model, and then let the real model follow the values calculated through forward dynamics. This work is carried out through an NRIC and in this process, modeling errors and external disturbance are compensated. This concept is similar to disturbance observer-based control, but it has the difference that H_∞ optimality is guaranteed. Finally, tracking results at trajectory containing the velocity discontinuity point and the position tracking performance in the disturbance environment is confirmed through the comparative study with a traditional inverse dynamics PD controller.

• The Journal of Korean Physical Therapy
• /
• v.22 no.2
• /
• pp.47-53
• /
• 2010

Purpose: This study investigated the effect of electroacupuncture stimulation on changes in blood biochemistry in spinal cord injury (SCI) rats whose cords were damaged by 6-hydroxydopamine (6-OHDA). Methods: Twenty-one Sprague-Dawley adult male rats were assigned to one of three groups: normal (n=7), control (n=7) and experimental group (n=7). The experimental group received electroacupuncture (Es-160, ITO, Japan) for 15 minutes in the form of low frequency (2 Hz) stimulation to the zusanli point. After treatment, we observed motor behavior recovery using the inclined plane test. We also measured serum and CNS concentrations and activities of enzymes including creatine kinase (CK), alkaline phosphatase (ALP), and Immunoglobulin G (IgG). Statistical analysis was done using one-way analysis of variance (ANOVA). Results: Concentrations of CK, ALP and IgG were lower in the experimental group than in the control group. Functional recovery was evaluated by the maximal angle of the inclined board on which rats could maintain their initial position. This allowed us to monitor progressive locomotor recovery. The maximal angles of the inclined plane test were higher in the experimental group than in the control group (p<0.05). Conclusion: The results of this study showed that electroacupuncture to the zusanli point has a therapeutic effect on functional recovery after SCI.