• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.163-166
• /
• 2003

In recent years, there has been increased to access multimedia service through the Internet due to rise of the access speed. We suppose the co-existence of the various access networks in adjacent area in the future, such as wireless LAN, Bluetooth, and 3G Cellular So, the size of the cell will be smaller and the number of access point will be increased. In other words, the potable devices need the efficient mobility scheme due to move between cells frequently Currently, the several of the scheme, which is Cellular IP, HAWAII, Mobile IPv4 regional registration, and hierarchical Mobile IPv6, is suggested to support micro-mobility but Mobile IPv4 is standard scheme to support the mobility of the mobile node. MPLS, which forwards the packet through switching instead of routing using IP address, has begun to deploy in the internet backbone to increase the performance of mobility protocol. The integration of both MPLS and Mobile IP improves the scalability of the Mobile IP data forwarding process by leveraging on the features MPLS which are fast switching and high scalability. Moreover it abbreviates IP-in-IP tunneling between HA and FA. In this paper, we suggest efficient mobility scheme through integration of both MPLS and hierarchical Mobile IPv6.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.597-602
• /
• 2005

This paper proposes an efficient multicast scheme for the hierarchical mobile IPv6(HMIPv6). If a mobility anchor point(MAP) in a new domain does not support multicasting, an entering group member cannot join the multicast group through the new MAP The group member thus keeps receiving multicast packets from its home agent(HA) using Mobile IPv6 (MIPv6). This increases the propagation delay of binding update (BU) messages. However, our scheme enables an entering group member to keep receiving packets from the old multicast MAP. It can also reduce tunneling costs, total delivery costs and handover latency. We simulated the performance of our scheme by comparing it with the seamless multicast handover in a hierarchical mobile Pv6 (M-HMIPv6) using the delivery cost and handover latency factors.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.15-27
• /
• 2014

양자화학 (quantum chemistry)을 처음 접했을 때, 이전까지의 고전역학 (classical mechanics)에 익숙한 대다수의 학생들은 양자화학을 받아들이는 데 어려움을 겪는다. 모형계에 양자역학 (quantum mechanics)을 직접 적용하여 봄으로써 생소한 양자 개념에 대한 이해를 도울 수 있다. 본 논문에서는 양자동역학 (quantum dynamics)을 수치적으로 구현하는 계산 프로그램을 모형계에 적용하여 양자 개념을 설명할 수 있는 몇 가지 예를 보이고자 한다. 1 차원 시간의존 슈뢰딩거 방정식 (1-D time-dependent $Schr{\ddot{o}}dinger$ equation)의 해를 얻어 양자동역학을 구현하였으며, 그에 해당하는 고전동역학은 뉴턴 방정식 (Newton's equation)의 해로 얻어졌다. 조화 진동자 퍼텐셜 (harmonic oscillator potential), 모스 진동자 퍼텐셜 (Morse oscillator potential), 이중 우물 퍼텐셜 (double-well potential), 네모 퍼텐셜 장벽 (rectangular potential barrier), 그리고 에카트 퍼텐셜 (Eckart potential)에 대한 계산을 수행하였다. 두 가지 동역학을 비교하기 위하여 계산 결과의 시각화 (visualization)를 이용하고 동역학 특성의 차이를 비교하는 차별화 (differentiation)를 강조한다. 영점에너지 (zero-point energy), 위상어긋남 (dephasing), 터널링 (tunneling), 그리고 반사 (reflection) 현상과 같은 양자동역학의 특징을 고전동역학과 비교함으로써 직관적인 이해를 도울 수 있었다. 이러한 결과는 양자화학에 입문하는 학생들을 대상으로 쓰일 수 있는 효율적인 강의 모델을 제시할 것으로 기대한다.

• Structural Engineering and Mechanics
• /
• v.66 no.2
• /
• pp.249-262
• /
• 2018

In this paper, reaction of functionally graded (FG) thick nanoplates resting on a viscoelastic foundation to a moving nanoparticle/load is investigated. Nanoplate is assumed to be thick by using second order shear deformation theory and small-scale effects are taken into account in the framework of Eringen's nonlocal theory. Material properties are varied through the thickness using FG models by having power-law, sigmoid and exponential functions for material changes. FG nanoplate is assumed to be on a viscoelastic medium which is modeled using Kelvin-Voight viscoelastic model. Galerkin, state space and fourth-order Runge-Kutta methods are employed to solve the governing equations. A comprehensive parametric study is presetned to show the influence of different parameters on mechanical behavior of the system. It is shown that material variation in conjunction with nonlocal term have a significant effect on the dynamic deformation of nanoplate which could be used in comprehending and designing more efficient nanostructures. Moreover, it is shown that having a viscoelastic medium could play an important role in decreasing these dynamic deformations. With respect to the fresh studies on moving atoms, molecules, cells, nanocars, nanotrims and point loads on different nanosctructures using scanning tunneling microscopes (STM) and atomic force microscopes (AFM), this study could be a step forward in understanding, predicting and controlling such kind of behaviors by showing the influence of the moving path, velocity etc. on dynamic reaction of the plate.

• Land and Housing Review
• /
• v.2 no.2
• /
• pp.183-188
• /
• 2011

Recently, the depth of tunnel constructed is getting deeper, which increases difficulty in construction works. Deliberate tunneling techniques are needed as the span and length of tunnels are increased. As one of the technical developments for tunnel, U-shaped and reinforced spider lattice girders are developed by optimizing the spider used in 95mm lattice girder as tunnel steel ribs. In order to evaluate the load bearing capacity of the lattice girder, the 4-point flexural tests are carried out. For the laboratory tests, straight specimens are made for the existing lattice girder and the new lattice girder. The results of the flexural tests showed that the maximum load bearing capacity of the new lattice girders was higher than the traditional one. The load-displacement behavior of the test specimens showed the elasto-plastic behavior in the existing lattice girder and the stress softening behavior in the new lattice girder. It was found that the load bearing capacities are changed depending on the location of the loading points.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.420-429
• /
• 2008

Currently, IEEE 802.11 Network could not support optimized tunneling scheme and buffering scheme based on movement detection to reduce multimedia data packet loss when an MN move from current subnet to new subnet during handover. It is because IEEE 802.11 did not transfer information of movement detection to AP. In this paper, we proposed new fast handover scheme by using advanced access point and optimized snoop protocol for network based Proxy Mobile IPv6 in IEEE 802.11 Networks. During handover, the proposed scheme reduces both the multimedia data packet loss rate and the packet reordering problems without changing MN's mobility stack in IEEE 802.11 Networks.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.159-159
• /
• 2016

Vertically-aligned carbon nanotubes (VCNT) have attracted much attention due to their unique structural, mechanical and electronic properties, and possess many advantages for a wide range of multifunctional applications such as field emission displays, heat dissipation and potential energy conversion devices. Surface modification of the VCNT plays a fundamental role to meet specific demands for the applications and control their surface property. Recent studies have been focused on the improvement of the electron emission property and the structural modification of CNTs to enable the mass fabrication, since the VCNT considered as an ideal candidate for various field emission applications such as lamps and flat panel display devices, X-ray tubes, vacuum gauges, and microwave amplifiers. Here, we investigate the effect of surface morphology of the VCNT by water vapor exposure and coating materials on field emission property. VCNT with various height were prepared by thermal chemical vapor deposition: short-length around $200{\mu}m$, medium-length around $500{\mu}m$, and long-length around 1 mm. The surface morphology is modified by water vapor exposure by adjusting exposure time and temperature with ranges from 2 to 10 min and from 60 to 120oC, respectively. Thin films of SiO2 and W are coated on the structure-modified VCNT to confirm the effect of coated materials on field emission properties. As a result, the surface morphology of VCNT dramatically changes with increasing temperature and exposure time. Especially, the shorter VCNT change their surface morphology most rapidly. The difference of field emission property depending on the coating materials is discussed from the point of work function and field concentration factor based on Fowler-Nordheim tunneling.

• Journal of KIISE:Information Networking
• /
• v.31 no.6
• /
• pp.620-632
• /
• 2004

IP is not suitable for mobile nodes by network-based routing because mobile nodes are dynamically change their network attachment point. Mobile-IP is an IETF standard providing continuous access to the Internet for mobile nodes, but it has the triangle routing problem. Also it has a performance degradation problem by massive packet loss during layer 3 handoff of mobile nodes. Especially, two IETF multicast support schemes for Mobile-IP do not guarantee the quality of realtime multimedia services because they have several problems such as long routing path, packet duplication(hi-directional tunneling) and massive packet loss(remote subscription). In this paper, we propose a lossless remote subscription scheme that guarantees the quality of realtime multimedia services over Mobile-IP. From the result of simulation, we verified that the proposed scheme in this paper can reduce the delay time of remote subscription by the effect of the low latency handoff scheme that is extended to apply to the multicast group management and it requires only 0.58% buffer spaces of the previously proposed lossless remote subscription scheme.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.12
• /
• pp.89-100
• /
• 1997

This paper investigated a new type of low voltage threshold switch (LVTS). As distinguished from the many other types of electronic threshold switches, the LvTS is ; voltage controlled, occurs at low voltages ($V_{2}$ $O_{5}$lV devices. The average low threshold voltage < $V_{LVT}$>=218 mV (standard deviation =24mV~kT/q, where T=300K), and was independent of the device area (x100) and amorphous oxide occurred in an ~22.angs. thick interphase of the V/amorphous- $V_{2}$ $O_{5}$ contacts. At $V_{LVT}$ there was a transition from an initially low conductance (OFF) state into a succession of quantized states of higher conductance (ON). The OFF state was spatically homogeneous and dominated by tunneling into the interphase. The ON state conductances were consistent with the quantized conductances of ballistic transport through a one dimensional, quantum point contact. The temeprature dependence of $V_{LVT}$, and fit of the material parameters (dielectric function, barrier energy, conductivity) to the data, showed that transport in the OFF and ON states occurred in an interphase with the characteristics of, respectively, semiconducting and metallic V $O_{2}$. The experimental results suggest that the LVTS is likely to be observed in interphases produced by a critical event associated with an inelastic transfer of energy.rgy.y.rgy.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.2 no.1
• /
• pp.23-35
• /
• 2008

Mobile IP (MIP) is the solution supporting the mobility of Mobile Nodes (MNs), however, it is known to lack the support for NEtwork MObility (NEMO). NEMO manages situations when an entire network, composed of one or more subnets, dynamically changes its point of attachment to the Internet. NEMO Basic Support (NBS) protocol ensures session continuity for all the nodes in a mobile network, however, there exists a serious pinball routing problem. To overcome this weakness, there are many Route Optimization (RO) solutions such as Bi-directional Tunneling (BT) mechanism, Aggregation and Surrogate (A&S) mechanism, Recursive Approach, etc. The A&S RO mechanism is known to outperform the other RO mechanisms, except for the Binding Update (BU) cost. Although Improved Prefix Delegation (IPD) reduces the cost problem of Prefix Delegation (PD), a well-known A&S protocol, the BU cost problem still presents, especially when a large number of Mobile Routers (MRs) and MNs exist in the environment such as train, bus, ship, or aircraft. In this paper, a solution to reduce the cost of delivering the BU messages is proposed using a multicast mechanism instead of unicasting such as the traditional BU of the RO. The performance of the proposed multicast-based BU scheme is examined with an analytical model which shows that the BU cost enhancement is up to 32.9% over IPDbased, hence, it is feasible to predict that the proposed scheme could benefit in other NEMO RO protocols.