• 오토저널
• /
• 제6권1호
• /
• pp.46-54
• /
• 1984

We applies Molecular Dynamics simulation technics to a system of Lennard-Jones potential interacting Argon liquid to study shear flow behavior. The thermodynamic state of the system is .rho.=35.54 Kg, mole/m$^{3}$, T=86.5.deg. K which is the triple point of Argon liquid. We applies shear rate : .epsilon.=9.26*10$^{9}$ 1/sec in the system. We find the response function, shear viscosity changes, and shear rate build-up as a function of time. We also find the thermal conductivity in a soft-sphere system.

• 전자공학회논문지S
• /
• 제36S권2호
• /
• pp.57-62
• /
• 1999

점확산 함수(point spread function: PSF)의 정확한 주정은 복원결과가 원 영상에 얼마나 근접할 수 있는가를 결정한다는 점에서 영상처리의 중요한 연구 주체중의 하나가 된다. 본 논문에서는 PSF를 추정하기 위한 새로운 알로리즘을 제안하고, 이를 영상복원에 적용한 후 이를 기반으로 완전 디지털 자동초점 시스템을 제안한다. 자동초점시스템을 구현하기 위한 과정은 두 단계로 구성되어 있는데, 즉 에지 분류을 통한 PSF측정과, 이를 이용한 영상복원이다. 보다 구체적으로, 입력 영상을 다수의 소 영상 혹은 블록으로 분할한 뒤, 에지를 포함하고 있는 블록들로부터 단위계단응답을 구하여 평균한 후, 2차원 등방성 PSF를 추정한다. 마지막으로 추정된 PSF를 사용하여 영상복원을 수행함으로써 맞는 영상을 구한다.

• 대한전자공학회논문지SP
• /
• 제46권1호
• /
• pp.7-13
• /
• 2009

본 논문은 디지털 자동초점을 위한 등방성 점확산함수 추정에 관한 새로운 방법을 제안한다. 제안하는 알고리듬은 영상의 윤곽에서 방향을 판단하고 방향에 따라 윤곽 프로파일을 수집한다. 수집한 윤곽 프로파일을 평균하여 계단응답을 만들고 등방성 점확산함수의 특징을 이용하여 점확산함수를 추정한다. 실험을 통해 열화된 영상에서 제안하는 알고리듬으로 점확산함수를 추정하는 과정을 보이고 정확성을 증명한다.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2556-2563
• /
• 2021

Metaheuristic algorithms can work well in solving or optimizing problems, especially those that require approximation or do not have a good analytical solution. Particle swarm optimization (PSO) is one of these algorithms. The response quality of these algorithms depends on the objective function and its regulated parameters. The nonlinear nature of the pressurized light-water nuclear reactor (PWR) dynamics is a significant target for PSO. The two-point kinetics model of this type of reactor is used because of fission products properties. The proportional-integral-derivative (PID) controller is intended to control the power level of the PWR at a short-time transient. The absolute error (IAE), integral of square error (ISE), integral of time-absolute error (ITAE), and integral of time-square error (ITSE) objective functions have been used as performance indexes to tune the PID gains with PSO. The optimization results with each of them are evaluated with the number of function evaluations (NFE). All performance indexes achieve good results with differences in the rate of over/under-shoot or convergence rate of the cost function, in the desired time domain.

• 대한물리치료과학회지
• /
• 제23권1호
• /
• pp.1-8
• /
• 2016

Purpose : The purpose of this study was to investigate the response of pulmonary function and heart rate recovery of smoker and nonsmoker in males aged 20s after graded maximal exercise. Method : The subjects were composed of smoker group (n=12) and nonsmoker group (n=12) in males aged 20s. Each groups completed an graded maximal exercise with Bruce protocol and were assessed on the pulmonary function(forced vital capacity : FVC, forced expiratory volume-one second : FEV1, FEV1/FVC) and heart rate. Result : The results were as follows: First, heart rate in the measurement point was a statistically significant difference for smoker and non-smoker group after maximal exercise, but FVC, FEV1, FEV1/FVC was no difference. Second, FEV1/FVC between smoker and nonsmoker group was a statistically significant difference after maximal exercise, but FVC, FEV1, heart rate was no difference. Conclusion : The results of this study is that smoking is negative effects on FEV1/FVC of pulmonary function in males aged 20s after maximal exercise.

• 천문학회보
• /
• 제37권1호
• /
• pp.93.2-93.2
• /
• 2012

Point Spread Function (PSF) is one of the most important optical characteristics for describing the performance of a telescope. And a concept of subpixelization is inevitable in evaluating the undersampled PSF (Shin and Sakurai 2009). Then, the internal structure of Yohkoh SXT CCD pixel is not uniform: For the top half of pixel area, the X-ray should pass a so-called gate structure where the charges are transferred to an output amplifier. This gate structure shows energy-dependent sensitivity (Tsuneta et al. 1991). For example, for Al-K (8.34 A) X-ray emission, the transmission of the polysilicon gate is about 0.9. Also, for the peak coronal response of the SXT thin filters, around 17 angstrom (0.729 keV), the transmission of the gate is about 0.6, falling off sharply towards longer wavelengths. It should be noted that this spectrally dependent non-uniform response of each CCD pixel will certainly have a noticeable effect on the properties of the PSF at longer wavelengths. Therefore, especially for analyzing the undersampled PSF of low energy source, a careful consideration of non-uniform internal pixel structure is required in determining the shape of the PSF core. The details on the effect of gate structure will be introduced in our presentation.

• Structural Engineering and Mechanics
• /
• 제47권1호
• /
• pp.45-58
• /
• 2013

In structural reliability analysis, the response surface method is a powerful method to evaluate the probability of failure. However, the location of experimental points used to form a response surface function must be selected in a judicious way. It is necessary for the highly nonlinear limit state functions to consider the design point and the nonlinear trend of the limit state, because both of them influence the probability of failure. In this paper, in order to approximate the actual limit state more accurately, experimental points are selected close to the design point and the actual limit state, and consider the nonlinear trend of the limit state. Linear, quadratic and cubic polynomials without mixed terms are utilized to approximate the actual limit state. The direct Monte Carlo simulation on the approximated limit state is carried out to determine the probability of failure. Four examples are given to demonstrate the efficiency and the accuracy of the proposed method for both numerical and implicit limit states.

• 상하수도학회지
• /
• 제37권6호
• /
• pp.437-446
• /
• 2023

We propose a transient evaluation scheme using a pressure measurement in a complicate pipeline systems. Conservation of mass and momentum equations in time domain can be transformed into a pressure head and flowrate relationship between upstream and downstream point in frequency domain. The impedance formulations were derived to address measured pressure at downstream to evaluate of flowrate or pressure head at any point of system. Both branched pipeline element and looped pipeline element can be generally addressed in the platform of the basic reservoir pipeline valve system. The convolution of time domain response function with measured pressure head from a downstream point provides flowrate or pressure head response in any point of the designated pipeline system. The proposed method was validated through comparison between traditional method of characteristics and the proposed method in several hypothetical systems.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.83-89
• /
• 2010

In this paper, the dynamic response of a CNC 5 Axles machining center was analyzed and then controlled passively by using the dynamic absorber. For the simplification of the theoretical approach, the CNC 5 Axles machining center was modeled as a flexible beam(Bed) having a point mass(Column), two discrete systems(a Table-set and a dynamic absorber). Specifically by using the dynamic absorber, the dynamic response of a Table-set which be caused by the vibration of a flexible beam, was reduced down to the infinitesimal level. The optimal design factors of the dynamic absorber were obtained from the minimization of the cost function. It was found that the natural frequencies of a UT-380 machining center be varied due to the movement of the Table-set. In view of the dynamic response of a Table-set, the larger spring stiffness and mass of the dynamic absorber were found to give the greater reduction.

• 전산구조공학
• /
• 제7권1호
• /
• pp.109-116
• /
• 1994

구조물의 신뢰도를 평가하는 방법을 살표보고 각각의 장.단점을 비교한다. 각 방법의 정확성을 평가하는 기준으로는 Crude Monte Carlo(CMC)방법을 택하여 Importance Sampling(IS)방법, 그리고 Directional Simulation(DS) 방법을 살펴보고 1차 근사방법은 현재 많이 사용되고 있는 Rackwitz-Fiessler(RF)방법, Chen과 Lind가 제안한 3-parameter방법(CL), Hohenbichler가 제안한 Rosenblatt 변환방법(RT)을 그리고 2차 근사방법은 Breitung이 제안한 곡률적합 포물선 (Curvature Fitted Paraboloid, CFP) 공식과 Kiureghian이 제안한 점적합 포물선(Point Fitted Paraboloid, PFP)공식, 그리고 Log-Likelihood Function을 이용하여 원변수공간에서 파괴확률을 구하는 2차 근사공식(LLF)을 비교한다. 그리고 한계상태식이 불명확할 때 효율적으로 사용할 수 있는 반응응답법(Response sufrace method, RSM)을 살펴본다. 각 방법의 효율성 특히 적용 가능성을 예제를 통해 해석한 결과 추출법의 경우는 DS방법이, 그리고 근사방법에서는 RSM방법이 효율적임을 알 수 있다.