• 대한전기학회논문지
• /
• 제37권2호
• /
• pp.130-137
• /
• 1988

The technique of dual-input describing function's synthesis is introduced and the construction of a nonlinear compensator, based on this technique, is proposed. A nonlinear compensator, describing a complex DIDF depending upon amplitude of the second sinusoidal input signal only, is also proposed, where the second sinusoidal input signal is supplied to the nonlinear compensator by external generator. This compensator, connected in a closed loop of the PI speed control of DC motor, can improve the speed response in view instability limit cycle, low speed response and disturbance of the dynamic shift of the Nyquist's critical point -1 + j O. It is verified theoretically that the improvement of speed response of DC motor using the proposed compensator is achieved by means of the dynamic shift of the Nyquist's critical point on the complex plane, and the speed characterstics of DC motor is to be tested through experiment for its performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1089-1092
• /
• 2001

In order to measure the vibration of a ribbed clindrical shell, the principle of reciprocity has been implemented. An accelerometer was fixed at the position defined as the excitation point. An impact hammer was used to tap at the response array points (64 points) located along the circumference of the shell. The frequency response function was reciprocally measured at each point in turn. The response data was processed to obtain the frequency/wavenumber spectrum. From the spectrum the characteristics of wave propagation on the ribbed cylindrical shell have been observed.

• Journal of Biosystems Engineering
• /
• 제32권5호
• /
• pp.284-291
• /
• 2007

This study was to investigate performance of position, basic controls and additional control for man-machine interface on a 3-point hitch of a tractor. The developed additional control was one-touchup, backup, turnup, liftarm limited, PTO on/off and an external control. As a result of experiment, maximum steady state error of response system was lower than $0.8^{\circ}$ and this result showed the function operated normally because the dead band of system set was ${\pm}1^{\circ}$. There was no abnormal situation by switch operation and sensor signal during the performance test. The results of experiment showed the characteristics of the response was sufficient to be used as the position and additional control system for tractors.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.816-820
• /
• 2003

The objective of this paper is to develop an experimental technique to measure the in-plane vibration intensity of a plate. In order to measure the in-plane vibration intensity at a data point, the frequency response functions for the 2 components of an acceleration vector are measured at each point of 4 points in the neighborhood of the data point. This experimental technique has been implemented to measure the in-plane vibration intensity of a plate. The experimental result has been compared with a theoretical result. It showed that the experimental technique can be effectively used to measure the in-plane vibration intensity of plates.

• 대한한방내과학회지
• /
• 제32권2호
• /
• pp.259-277
• /
• 2011

Objectives : The purpose of this study was to investigate two subjects: the diagnostic value of bilateral lowering of electrical activity at point H4,5,6 of Ryodoraku and the mechanism for Ryodoraku phenomena. Methods : Electrical activities of Ryodoraku test and electrogastrography recorded simultaneously and monitored continuously from 16 cases of functional dyspeptic patients were collected and their variations were grouped by the topics of discussion which were peculiarity, stability, lagging, alterability, and anomaly. Ryodoraku recordings obtained from 6 patients with different gastrointestinal diseases and 1 normal healthy person were used as control. The results are discussed with Nakatani's suggestion, theory of sympathetic nerve and Meridian Principle, respectively. Finely, coincidence of stomach arrangement between anatomy and meridian system in Ryodoraku was also evaluated. Results : Time-course variation showed a regular relationship between the typical pattern of Ryodoraku at point H4,5,6 and gastric myoelectrical activity. However, an irregular relationship and atypical pattern of Ryodoraku occasionally appeared. A literature search suggested that electrical response at the Ryodoraku point H4,5,6 may be dependent on an afferent sympathetic spinal reflex transmitted from the stomach. However, there was no evidence for making clear whether bilateral lowering of electrical activity at this point was induced by hypofunction of local sympathetic nerve in the skin itself or of signals transmitted from the gastric sympathetic nerve or not. The coincidence of 19% could not provide a visceral arrangement of the stomach between anatomy and meridian systems. Conclusions : Bilateral lowering of electrical activity at Ryodoraku point H4,5,6 has value as a diagnostic index for gastric dysmotility of functional dyspepsia. This phenomenon is associated with spinal reflex transmitted from the afferent sympathetic nerve in the stomach but not that of meridian function.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.786-791
• /
• 2005

This paper is concerned with the examination and evaluation concerning a tuning method of multivariable PID controllers based on partial model matching on frequency domain proposed by authors from practical view point. In this case, PID controller parameters are determined by minimizing the loss function defined by the difference between frequency response of ideal model transfer function and actual frequency response on several frequency points. The purpose of the paper is to examine and evaluate the performance of the method through actual experiments of MIMO liquid level experimental process control equipment.

• 방송공학회논문지
• /
• 제15권6호
• /
• pp.845-852
• /
• 2010

클라이언트로부터의 요구메시지의 통계를 바탕으로 하여 방송 서버는 데이터 아이템에 대하여 최적의 컷오프 포인트를 이용하여 핫 아이템과 콜드 아이템으로 나눈다. 핫 아이템은 주기적으로 방송되는데 이 때, 방송 주기는 아이템들의 인기도, 즉 요구확률에 따라 정해진다. 핫 아이템이 방송되지 않은 빈 슬롯에는 적절한 콜드 아이템을 골라 방송하게 되는데, 이 때 대기시간과 대기 중인 요구 메시지의 수 등을 고려하여 콜드 아이템을 정한다. 최적의 컷오프 포인트를 해석적으로 구하기 위하여 평균 응답시간을 컷오프 포인트의 함수로 나타나도록 계산하였다. 요청 도착율과 아이템의 인기도를 변화하면서 수행한 시뮬레이션을 통하여 본 논문에서 제안한 방법이 기존의 방법들보다 더욱 우수한 성능을 나타냄을 보였다.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.545-550
• /
• 2009

A method fully utilizing multiscale line filter responses is presented to estimate the point spread function(PSF) of a CT scanner and diameters of small tubular structures based on the PSF. The estimation problem is formulated as a least square fitting of a sequence of multiscale responses obtained at each medical axis point to the precomputed multiscale response curve for the ideal line model. The method was validated through phantom experiments and demonstrated through phantom experiments and demonstrated to accurately measure small-diameter structures which are significantly overestimated by conventional methods based on the full width half maximum(FWHM) and zero-crossing edge detection.

• 대한전기학회논문지
• /
• 제43권4호
• /
• pp.687-690
• /
• 1994

This paper presents a method of obtaining transmission network equivalents from the network's response to the pulse excitation signal. Proposed method is base on Prony signal analysis and jtransfer function identification technique. As a result Thevenin-type of discrete-time filter model can be generated. It can reproduce the driving point impedance characteristic of the network.

• 수산해양기술연구
• /
• 제29권1호
• /
• pp.39-55
• /
• 1993

Modal Analysis is the process of characterizing the dynamic properties of an elastic structure by identifying its modes of vibration. A mode of vibration is a global property of an elastic structure. That is, a mode has a specific natural frequency and damping factor which can be identified from response data at practically any point on a structure, and it has a characteristic mode shape which identifies the mode spatially over the entire structure. Modal testing is able to be performed on structural and mechanical structure in an effort to learn more about their elastic behavior. Once the dynamic properties of a structure are known its behavior can be predicted and therefore controlled or corrected. Resonant frequencies, damping factors and mode shape data can be used directly by a mechanical designer to pin point weak spots in a structure design, or this data can also be used to confirm or synthesize equations of motion for the elastic structure. These differential equations can be used to simulate structural response to know input forces and to examine the effects of pertubations in the distributed mass, stiffness and damping properties of the structure in more detail. In this paper the measurement of transfer functions in digital form, and the application of digital parameter identification techniques to identify modal parameters from the measured transfer function data are discussed. It is first shown that the transfer matrix, which is a complete dynamic model of an elastic plate structure can be written in terms of the structural modes of vibration. This special mathematical form allows one to identify the complete dynamics of the structure from a much reduced set of test data, and is the essence of the modal approach to identifying the dynamics of a structure. Finally, the application of transfer function models and identification techniques for obtaining modal parameters from the transfer function data are discussed. Characteristics on vibration response of elastic plate structure obtained from the dynamic analysis by Finite Element Method are compared with results of modal analysis.