• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.8
• /
• pp.1145-1153
• /
• 2015

The paper analyzes reactive power flow characteristic in power system by reactive power tracing. In addition, virtual buses are inserted in the algorithm to consider losses of transmission lines, and shunt capacitor treated as a reactive power generator. The results of simulation are analyzed by two points of view. The one is load’s point of view and another is generator’s point of view. Classic purpose of the reactive power tracing consists in the reactive power pricing. However, it is significantly used to select vulnerable area about line outage in this paper. To find the vulnerable area, reactive power tracing variations between pre-contingency and post-contingency are calculated at all load buses. In heavily load area, buses which has highest variation become the most vulnerable bus. This method is applied to the IEEE 39-bus system. It is compared with voltage variation result and VQ-margin to verify its effect.

• KIEAE Journal
• /
• v.14 no.4
• /
• pp.69-79
• /
• 2014

Adverse effects resulting from the development of the environment and to minimize damage to the natural environment and the desire for pleasant scenery and the sense of raising more awareness about May 17, 2007 in accordance with the scenery method is established by each municipality landscape management and landscape planning committee Configure the district planning officer for development projects, including enhancing deliberation scenery method 7 February 2014 and revised in urban areas is more than $30,000m^2$ urban planning landscape projects are all considered by a committee mandated to landscape receive a defined landscape plan for the development was enhanced. Gyeonggi Province in 2007 after the enactment of the scenery method for district planning and landscape planning by strengthening the district planning consideration during deliberations landscape simulation by selecting the view that the proposed mandatory hearing officer from the Joint Committee on Urban construction was done. In this study, Gyeonggi-do district planning business point of view the characteristics of the landscape planning and landscape planning of the center of analysis and as a basis for the evaluation presented.

• Hip & pelvis
• /
• v.30 no.4
• /
• pp.219-225
• /
• 2018

Purpose: Ischiofemoral impingement (IFI)-primarily diagnosed by magnetic resonance imaging (MRI)-is an easily overlooked disease due to its low incidence. The purpose of this study was to evaluate the usefulness of false profile view as a screening test for IFI. Materials and Methods: Fifty-eight patients diagnosed with IFI between June 2013 and July 2017 were enrolled in this retrospective study. A control group (n=58) with matching propensity scores (age, gender, and body mass index) were also included. Ischiofemoral space (IFS) was measured as the shortest distance between the lateral cortex of the ischium and the medial cortex of lesser trochanter in weight bearing hip anteroposterior (AP) view and false profile view. MRI was used to measure IFS and quadratus femoris space (QFS). The receiver operating characteristics (ROC), area under the ROC curve (AUC) and cutoff point of the IFS were measured by false profile images, and the correlation between the IFS and QFS was analyzed using the MRI scans. Results: In the false profile view and hip AP view, patients with IFI had significantly decreased IFS (P<0.01). In the false profile view, ROC AUC (0.967) was higher than in the hip AP view (0.841). Cutoff value for differential diagnosis of IFI in the false profile view was 10.3 mm (sensitivity, 88.2%; specificity, 88.4%). IFS correlated with IFS (r=0.744) QFS (0.740) in MRI and IFS (0.621) in hip AP view (P<0.01). Conclusion: IFS on false profile view can be used as a screening tool for potential IFI.

• Imaging Science in Dentistry
• /
• v.31 no.4
• /
• pp.209-214
• /
• 2001

Purpose: To investigate the ability of double TMJ view by multifunctional panorama to view the bony components and the space of the temporomandibular joint. Materials and Methods: Ten dry skulls fitted with resin shims over the articular surface of the condyle were used to reproduce the temporomandibular joint space. Fine metal wires were attached to the three portions of contours of the condylar head and the articular eminence. With 10 dry skulls and 20 cases having TMJ dysfunction, double TMJ views by multifunctional panorama (Planmeca 2002 Proline CC) and transcranial views were taken, analyzed from the anatomical view point, and compared statistically in view of the widths of the posterior joint space and the condylar head. Results: In double TMJ view, the supero-anterior part of the condyle represented the lateral 1/3, the most superior part represented center portion, and the posterior part medial l/3 of the condyle. In maximum mouth opening, no other structures were superimposed with the condyle in double TMJ view. In double TMJ view, petrous bone was moderately superimposed with the superior part of the condyle and the posterior increment of angle exposure made wider the images of the articular eminence and the condyle. The tendency of reduction in the posterior joint space appeared in the side of TMJ dysfunction compared with the normal side. The posterior joint spaces in double TMJ view were statistically wider (p<0.05) than those in transcranial view. The correlation coefficient was 0.5179 between the widths of the posterior joint spaces in two radiographic views. Conclusions: Double TMJ view can be substituted for transcranial view in evaluating the TMJ dysfunction.

• Journal of the Korean Institute of Rural Architecture
• /
• v.4 no.3
• /
• pp.23-37
• /
• 2002

Buddhist Architecture should be set for worship and an ascetic life, which is its main function as it is a religious facility and its space and form can be considered as means to achieve efficiently a religious function. Every religion concludes its religious function through its ideas and form of faith based on scriptures and religious precepts. The thing should be paid attention to from this point of view is how Buddhist doctrines are reflected on the architecture and the background recognition about the fundamental doctrines and religious system should be preceded to clarify it. Existing researches have studied the characteristics of Buddhist temples on the point of functional view and architectural spacial view through phenomenal ways. Though fruitful results bore about the Korean space through that way, more internal viewpoint is required to clarify the fundamental regularities and spatial concepts indwelling in temple architecture. Considering what structural elements were required to compose one space in traditional Korean architecture is the fundamental subject and important. This thesis searches architectural characteristics through inquiring about the main building and annexes and understanding symbolic characteristics about the arrangement of the Buddhist statue and solemn things in the Buddhist temples of tangible cultural assets or above located in Seoul area.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.3
• /
• pp.151-164
• /
• 2001

Currently, there are little evaluated model for each industry and systematic analysis for each item about current business web sites. And the approach way to improve it all depends on individual. This research is about two different points of view on I-Evaluation development as an approach method to provide analysis, evaluation, and guideline on business web sites. The one is about developing a working step and a site evaluation model that are necessary to improve the quality of site. The other is about a framework development to apply a feedback on site most rapidly and site optimization. The former is from the methodological point of view for I-Evaluation, and the latter is from the point of view for I-Evaluation Framework. In terms of methodology, developing site evaluation model and defining a working step belong to it. Site evaluation model means customizing each customers web site, using each evaluated scoring model which can be a standard for each industry to analyze a similar business web site. Defining a working step means defining input and output parameters for composed elements, working processes, and results analysis on an evaluated model. And also it includes building a working environments to automatic steps mentioned the above by clarifying them.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.3
• /
• pp.41-46
• /
• 2002

We generally used electric optical sensors in order to detect and identify sea objects efficiently. However due to the limitation of view-angle, the region acquired from the sense is restricted. So it is necessary to generate panoramic image from sea images acquired from pan-tilt camera. Previous mosaicing method is not able to generate panoramic image for sea environment because intensity is similar to all region and time varying. In this paper, we proposed new algorithm for generating high-resolution panoramic image on sea environment. Proposed algorithm use single-view point model, applying mosaicing result in feature environment to in sea environment, we overcame the limitation of previous method. In the result of virtual and real experiment, we showed that proposed algorithm is efficient for generating sea panoramic image.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.1
• /
• pp.98-106
• /
• 1993

As a faithful study about the intended plan of builder, this article studied the Dosanseodang(陶山書堂) which is located in the Dosanseodang(陶山書堂). The Dosanseowon is one of the representative Yi-Dynasty' Seowons. Through the review of $\ulcorner$The Writings of Toegye$\lrcorner$. It is found several intended plan of the Dosanseodang(陶山書 堂) as follows. 1. When Toegye located the site of the Dosanseodang in the Dosan, using four criteria such as 1) geographical characteristics(地 理), 2) hills and waters(山水) 3) form and orientation of valley, 4) so-cial characteristics. 2. In the Dosan area, the location of Seodang was determined by the physical characteristics of the valley(orientation and entrance), not by the concept of Fung-sui(風水). 3. The whole spatial structure of Seodang area formed triangle, and the Dosanseodang was located at the angular point of the triangle. 4. The landscape elements of the Dosanseodang falled into the three landscape hierarchy such as a front view, a middle view, and a distance view. Besides the three views, there was a borrowed view which Toegye defined in terms of ownership.

• Fashion & Textile Research Journal
• /
• v.2 no.5
• /
• pp.383-390
• /
• 2000

The purpose of this study was to classify the somatotype of elderly women and to extract discriminant factors of the classification. The subjects were 218 elderly women aged 60-85 years old. Data were collected from 46 anthropometric and photographic measurements of each subject and analyzed by frequencies, crosstabs, analysis of variance and discriminant analysis. The somatotype was classified into 5 types according to the lateral view. The normal type was defined as the type which the plumb line passes through the cervicale and the lateral malleolus. The lean-back type positioned the plumb line more posteriorly than normal type. The swayback type positioned the plumb line at about the same line as the lean-back type, but curvature of lateral view was prominent. The lean-forward type I and II positioned the plumb line more anteriorly than normal, but the spinal curvature of the type II disappeared. As the result of discriminant analysis, significant discriminant factors of anthropometric measurement were cervicale height, anterior waist height, neck point to posterior waist length, anterior waist length. Photographic measurement were C valve, D value, ∠${\alpha}$ and ∠${\beta}$.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.391-394
• /
• 2009

Asymmetrical and unbalanced features such as rotor blade of helicopter, actuator of hard-disk in personal computer are usually manufactured with composite materials. In this case, mass distributions and center of gravity of the parts are important because of their static balancing. Therefore in the manufacturing processes, it is needed to check out the exact data of weight and gravity center. In this study, it has been studied experimentally the balancing of laminated rotor blade by using multiple-point weighing method and lab-view system.