• 한국환경과학회지
• /
• 제19권11호
• /
• pp.1407-1421
• /
• 2010

This study was carried out to elucidate the relation between water quality and structure of the aquatic ecosystem in the agriculture reservoir Otae-ji from January to December in 2009. The proportion of forest was 46.98%, which means that non-point sources are major contributor of water pollution in this area. The annual mean COD(Chemical Oxygen Demand) in Otae-ji was $3.6mgL^{-1}$, indicating, level II of environmental standards and the trophic state was mesotrophic. Although total phosporus concentration in the reservoir was high in August due to large inflow of nutrients from outside the reservoir during monsoon season, there was no break out of significant algal bloom in the summer. The seasonal succession of phytoplankton showed that the dinophyta dominated in the the spring, chlorophyta in the summer, chrysophyta and chlorophyta in the autumn and chrysophyta in the winter. In case of zooplankton, rotifers dominated in the most seasons, but cladoceran(Bosmina longirostris) dominated in June and copepod(Nauplii) in August. The macrophyte plants showed diverse species compositon consisted of 3 varieties, 24 species, 23 genera, 15 families and 14 orders. The macroinvertebrates also showed various FFG(Functional Feeding Groups) such as GC(Gathering-Collector), P(Predator), SH(Shedder), FC(Filter-Collector) and PP(Plant-Piercer). Ecosystem stability analysis using aquatic insects was classified as Group I, which has high resilience and resistance indices. A total of 14 species of fish was collected but exotic species such as Lepomis macrochirus and Micropterus salmoides were not found in Otae-ji. In conclusion, the preservation of healthy food wed in the reservoir ecosystem is closely related to water quality management as well as effective prevention of algal bloom by helping good material circulation in aquatic ecosystems.

• 콘크리트학회논문집
• /
• 제26권3호
• /
• pp.267-275
• /
• 2014

최근 곡선교 사용이 증가함에 따라 기존 곡선 교량의 한계점을 극복하고자 PSC 곡선 주형을 이용한 곡선교에 대한 해석적 연구가 활발히 진행되고 있다. 그러나 기존의 프레임 요소를 이용한 격자해석방법으로는 PSC 곡선교에 대한 정밀해석이 어렵다. 이에 따라 이 연구에서는 PSC 곡선교의 정밀 유한 요소 해석을 실시하여 프리캐스트 PSC 곡선교의 설계를 위한 참고자료로 사용하고자 한다. 이를 위하여 3차원 솔리드 요소를 사용한 모델링을 실시하고, 거더 수, 하중 재하 위치, 단면 변화, 긴장력 변화 및 편긴장력 도입 여부와 같은 매개변수에 대한 거동을 평가하였다. 해석 결과 경간장 50 m 3주형 교량의 항복하중과 파괴 하중이 경간장 40 m 2주형 교량에 비해 200% 이상의 성능을 보였고, 외측거더에 하중을 가하였을 경우 도심의 위치에 따라 하중저항력 및 거더 간의 처짐 편차가 낮게 평가되는 것으로 나타났다. 또한 거더 단면을 변화시킨 경우 단면의 증가에 따라 구조성능이 향상되는 것으로 나타났으나 PS도입량의 변화에 의한 효과에 비해 경제성과 시공성에서 불리한 것으로 나타났다. PS 도입량 변화에 따른 영향을 분석한 결과 PS 도입량이 증가함에 따라 솟음량과 하중저항력이 비례하여 증가하였으며 거더 간 처짐 편차가 줄어드는 경향을 보였다. 또한, 편긴장력을 도입하였을 시 도입량 증가에 비례하여 내외측 거더 모두에서 하중저항력이 증가하며, 특히 외측거더에 편긴장력이 도입되었을 때 더 우수한 성능을 보이는 것으로 나타나, PSC 곡선교의 경제성 및 안정성을 확보하는데 효율적인 것으로 나타났다.

• 한국세라믹학회지
• /
• 제42권3호
• /
• pp.165-170
• /
• 2005

Sol-gel 공정에 의해 제조된 세라믹 분리 막은 보다 순수한 재료를 이용할 수 있고, 균일성을 향상시킬 수 있을 뿐 아니라 다양한 복합체도 넓은 범위에서 반응을 유도할 수 있다는 장점을 가지고 있어 많은 연구가 진행되고 있다. 본 연구에서는 sc,1-gel 공정을 이용하여 Tetraethyl ortho-silicate(TEOS)-Polyethylene glycol(PEG)계 organically modified silicate(ORMOSt)sol을 합성하였다. Polymer분자량을 변수로 하여 sol 합성 후 특성 변화를 점도와 겔화 시간을 측정함으로써 관찰하였다. 합성된 sol을 다공성 담체 위에 dip-coating법을 이용하여 막을 제조하였으며, SEM관찰을 통해 분리 막의 미세구조를 확인하였다. 합성 복합 막의 Oil/water 에멀젼의 처리효율을 cross-flow 타입의 막 분리 장치를 이용하여 확인하였다. Ormosilsol은 유기물의 분자량이 증가될수록 보다 쉽게 코팅 층을 형성 시킬 수 있었고, 담체를 용매에 담지 시켜 코팅 물질이 담체의 기공내로 침투될 때의 모세관력을 줄임으로써 크랙이 방지된 얇은 막을 얻을 수 있었다. Colloidal sol 코팅 막에 비해 ormosil sol코팅 막은 분리효율 뿐 아니라 flux 특설이 시험 5분경과 시점에서 약 $200\;l/m^2h$이상 향상되었음을 확인 할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.39-40
• /
• 2010

건물이 대형화 고층화되어 감에 따라서 층고를 절감시킴과 동시에 장스팬을 구현할 수 있는 부재에 대한 요구가 늘어가고 있다. 비록 많은 연구자에 의해서 층고절감과 장스팬에 대한 요구를 만족시키기 위한 연구가 진행되고 있지만, 여전히 두 가지 요구사항을 동시에 만족시키는 효율적인 시스템이 부족한 실정이다. 본 연구에서 제안하는 파형웨브를 가진 프리스트레스 합성보는 시공성과 구조적인 성능을 동시에 향상시킬 수 있다. 시공과정에서 발생할 수 있는 비대칭 하중에 상대적으로 작은 부재를 가지고 강한 저항성을 발휘하여 시공성을 높일 수 있으며, 또한 동바리와 서포트 등의 가설부재를 줄임으로써 경제성도 확보할 수 있다. 파형웨브는 아코디언효과를 만들기 때문에 프리스트레스의 도입효율이 좋아져 더 큰 상향치올림를 유발시켜 부재의 처짐을 줄일 수 있다. 5개의 실험체를 제작하여 제안한 합성보의 효율성을 검토하였는데 그 주요한 변수로는 웨브와 플렌지에 용접된 형태와 drape point의 개수이다. 실험을 통하여 제안한 프리스트레스 합성보가 기존에 프리스트레스를 도입하지 않은 합성보 보다 큰 휨강성과 휨강도를 발휘한다는 것을 증명하였다.

• 구강회복응용과학지
• /
• 제21권1호
• /
• pp.1-14
• /
• 2005

The purpose of this study was to assess the loading distributing characteristics of implant prosthesis of internal connection system(ITI system) according to position and direction of load, under vertical and inclined loading using finite element analysis (FEA). The finite element model of a synOcta implant and a solid abutment with $8^{\circ}$ internal conical joint used by the ITI implant was constructed. The gold crown for mandibular first molar was made on solid abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone. This study simulated loads of 200N at the central fossa in a vertical direction (loading condition A), 200N at the outside point of the central fossa with resin filling into screw hole in a vertical direction (loading condition B), 200N at the centric cusp in a $15^{\circ}$ inward oblique direction (loading condition C), 200N at the in a $30^{\circ}$ inward oblique direction (loading condition D) or 200N at the centric cusp in a $30^{\circ}$ outward oblique direction (loading condition E) individually. Von Mises stresses were recorded and compared in the supporting bone, fixture, and abutment. The following results have been made based on this study: 1. Stresses were concentrated mainly at the ridge crest around implant under both vertical and oblique loading but stresses in the cancellous bone were low under both vertical and oblique loading. 2. Bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. The magnitude of the stress was greater with the oblique loading than with the vertical loading. 3. An offset of the vertical occlusal force in the buccolingual direction relative to the implant axis gave rise to increased bending of the implant. So, the relative positions of the resultant line of force from occlusal contact and the center of rotation seems to be more important. 4. In this internal conical joint, vertical and oblique loads were resisted mainly by the implant-abutment joint at the screw level and by the implant collar. Conclusively, It seems to be more important that how long the distance is from center of rotation of the implant itself to the resultant line of force from occlusal contact (leverage). In a morse taper implant, vertical and oblique loads are resisted mainly by the implant-abutment joint at the screw level and by the implant collar. This type of implant-abutment connection can also distribute forces deeper within the implant and shield the retention screw from excessive loading. Lateral forces are transmitted directly to the walls of the implant and the implant abutment mating bevels, providing greater resistance to interface opening.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권5호
• /
• pp.542-547
• /
• 2015

Since the oil price has been significantly jumped for several years, a heavy oil of low quality has been mainly used in the diesel engine of the merchant ship. Thus, a combustion chamber of the engine has been often exposed to severely corrosive environment more and more because temperature of the exhaust gas of the combustion chamber has been getting higher and higher with increasing of using the heavy oil of low quality. As a result, wear and corrosion of the engine parts such as exhaust valve, piston crown and cylinder head surrounded with combustion chamber are more serious compared to the other parts of the engine. Therefore, an optimum repair welding for these engine parts is very important to prolong their lifetime in a economical point of view. In this study, Inconel 625 filler metal were welded with GTAW method in the cast steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected and base metal zones were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. The weld metal and base metal zones exhibited the highest and lowest values of hardness respectively. Furthermore, the corrosion current density of the weld metal zone revealed the lowest value, having the highest value of hardness. The corrosive products with red color and local corrosion like as a pitting corrosion were considerably observed at the base metal zone, while these morphologies were not wholly observed in the weld metal zone. In particular, the polarization characteristics such as impedance, polarization curve and cyclic voltammogran associated with corrosion resistance property were well in good agreement with each other. Consequently, it is suggested that the mechanical and corrosion characteristics of the piston crown can be predominantly improved by repair welding method using the Inconel 625 electrode.

• Archives of Reconstructive Microsurgery
• /
• 제19권1호
• /
• pp.37-45
• /
• 2010

Purpose: First introduced by Buncke and Rose in 1979, the neurovascular partial $2^{nd}$ toe pulp free tissue transfer has been attempted to reconstruct posttraumatic finger tip injuries. Although some surgeons prefer other reconstructive methods such as skin graft and local flap, we chose the partial $2^{nd}$ toe pulp flap owing to its many advantages. We report three successful surgical cases in which the patients had undergone this particular method of reconstruction. Methods: We retrospectively examined three cases of fingertip injury patients due to mechanical injury. Bone exposure was seen in all three cases, All had undergone partial toe pulp free flap for soft tissue defect coverage. Results: All flaps survived without any complications such as partial necrosis, hematoma or dehiscence. Although tingling sensation has returned in both cases, two-point discrimination has not returned yet. Currently no patient is complaining of any pain which gradually improved during their course of recuperation. All stitches were removed on postoperative 2 weeks. Patients are satisfied with the final surgical result and there are no signs of any edema or hematoma. Conclusion: The homodigital reconstruction of finger tip injury using the partial $2^{nd}$ toe pulp flap has numerous advantages compared to other reconstructive modalities such as its resistance to wear and tear and in that it provides a non-slip palmar digital surface. However it requires microsurgery which may not be preferred by surgeons. Advanced age of the patient can be a relative contraindication to this approach since atheromatous plaque from the donor toe can compromise flap circulation after surgery. We report three successful cases which patient age was considered appropriate. Further investigation with a larger number of cases and long term follow-up is deemed necessary.

• 수산해양교육연구
• /
• 제26권4호
• /
• pp.769-788
• /
• 2014

Today, all the countries of the world newly recognize importance of sea on 70% area of the earth, which are focused on efforts for security of marine territory and fishes resources. On the security concerns of the ocean & fishes resources, Sea are very important on the ground of the importance of the ocean, thus international community has been trying to combat a maritime security threat and illegal fisheries. Coastal states need to have proper state's jurisdiction and exercise it's jurisdiction to response effectively to a maritime security threat and illegal fisheries. Here, many of the coastal states strengthened the rights in Exclusive Economic Zone(;EEZ) naturally, there are made cooperation activities and keen competition in the sea because deepening of complex understanding of the relationship between the surrounding countries with marine surveys & continental shelf development, island territorial sovereignty & marine jurisdiction in overlap of sea area on EEZ. In these circumstances, foreign fishing boats invaded to our territorial waters and EEZ many times. in addition, Chinese fishing boats are going to illegal fisheries naturally. On this point, a powerful crackdown of maritime enforcement organization had no effect on them. Also more and more their resistance gathered strength and tendency of a illegal activities became systematization, group action and atrocity little by little. So this thesis includes a study on the regal regulation, the system and formalities on the control of illegal fishing. And the author analyzed the details of the activities of illegal fishing and boats controlled by Korea Coast Guard(KCG), fishing patrol vessels of Ministry of Maritime Affaires and Fisheries(MOMAF) and Navy etc. from in adjacent sea area of Korea. In relation to this, the policy and activity plan were devised to crackdown to illegal fisheries of foreign fishing boats and then it was enforced every year. According to this, analyze the present conditions of illegal fisheries of a foreign fishing boats on this study, also analyze the present conditions of maritime enforcement organization & found out problems to compared it. protect the territorial waters, at the same time protection of marine mineral resources & fishes resources of EEZ including continental shelf, which has want to study for the role & response of maritime enforcement organization for the protection of fisheries resources and a proper, a realistic confrontation plan of maritime enforcement organization against illegal fisheries of foreign fishing boats.

• Ecology and Resilient Infrastructure
• /
• 제4권4호
• /
• pp.207-215
• /
• 2017

하도의 흐름 저항, 측벽 보정, 유사량, 하도 침식과 퇴적, 하도 설계 등의 수리학적 문제는 하상전단응력의 분포와 밀접한 관계가 있으나 하상전단응력 분포를 측정하는 것은 쉽지 않다. 본 연구에서는 간편하게 하상전단응력을 측정할 수 있는 프레스톤튜브를 이용하여 복단면의 하도의 하상전단응력 분포를 측정하고 수심비에 따른 전단응력분포 특성을 고찰하였다. 이를 위해 프레스톤튜브를 제작하여 검정실험을 통해 검정식을 개발하였다. 실험은 5가지 수심비 조건에 대해서 수행하여 전단응력분포를 측정하였다. 복단면 하도의 전단응력분포 특성은 기존 실험연구와 대체로 일치하였으며, 레이놀즈수 증가로 발생하는 전단응력의 변동성, 주수로 전단응력의 변곡점 형성, 홍수터 접합부 부근 전단응력 분포 특성 등에서 차이점을 확인하였다. 본 연구를 통해 프레스톤튜브를 이용한 하상전단응력측정 적용성을 확인하였으며 레이놀즈수와 수심비에 따른 복단면 하도의 전단응력분포 특성을 제시하였다.

• 한국환경복원기술학회지
• /
• 제5권2호
• /
• pp.53-62
• /
• 2002

The objectives of this study were to understand the tolerance mechanism of woody plants to water stress and tolerance changes in relation to mycorrhizal formation. Lespedeza cyrtobotrya Miq. commonly used for erosion control in slopes were raised from seeds and transplanted to 120 plastic pots. Sixty pots received the top soil of a Fraxinus americana forest, while remaining 60 pots received the autoclaved top soil. The forest soil contained 1,200 spores per 100g of arbuscular endomycorrhizal fungus, mostly Glomus sp. The plants were raised outside with regular supply of water and mineral nutrients. Two kinds of water deficit treatment and a control were started at the middle of July : cyclic water deficit treatment with 3 cycles of sequential water stress at the point of xylem water potential of about -0.6, -0.6, and -1.7 MPa and recovery, and non-cyclic water deficit treatment with single water stress at about -1.5 MPa. The non-stressed plants received plenty of water throughout the period. In late August the plants were harvested for measurements of dry weight, N, P, carbohydrate contents, net photosynthesis and superoxide dismutase(SOD) activities. Both cyclic and non-cyclic water deficit treatments reduced dry weight by 60% and 40%, respectively, and reduced nitrogen absorption, while increased SOD activities. Water-stressed plants also showed increased carbohydrate contents in the leaves and lowered stomatal conductance. Mycorrhizal inoculation resulted in an average of 40% infection of roots and 2-3 times increase in P absorption in water-stressed as well as non-stressed plants. Mycorrhizal formation also increased shoot-root ratio. The results that SOD activities of water-stressed plants with mycorrhizal infection were significantly lower than those of non-mycorrhizal plants suggest the possibility of improvement of water-stressed condition by mycorrhizal formation. It was concluded that endomycorrhizal formation increased tolerance of Lespedeza cyrtobotrya seedlings to water stress.