• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.418-420
• /
• 2007

When the magnetic levitation system(MAGLEV) initially rise, The MAGLEV has a weak point that is very large variation of the electric current. In this paper, The author applied the multi-loop-control to stably control the magnetic levitation system(MAGLEV). The gains of the control algorithm were selected based on pole locations formulated from a prototype Bessel transfer function model. The design incorporate tradeoffs in DC-to-DC converter hard-ware para-meters and pole locations. In order to confirm the superiority of the proposed pole selection and controller, MATLAB simulation and experiment results are presented.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.271-273
• /
• 1993

One maglev vehicle is composed of 6 or 8 modules. Each module is composed of 4 staggered magnets attached to an aluminum bogie. In the view point of levitation control except propulsion-by LIM. 5 is the maximum degree of freedom to be controlled. But rolling control of the vhhicle depends on the bogie structure. We describe just anti-roll type bogie structure and 4 degree of freedom control is sufficient for levitation quality improvement. Multivariable pole-placement concept is used for controller design. Control experiment is performed on a specially designed test module as well as actual bogie system.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.5
• /
• pp.71-81
• /
• 2014

As domestic construction investment has been gradually reduced, the issue of expanding overseas CM market has increased. Strengthening CM capability from the view point of project life-cycle is required in overseas CM market. However, current regulations institutionally force public CM services to focus on the construction phase. Therefore, Korean CM firms can hardly have the opportunities for accumulating technical competitiveness especially for pre-construction phase. Result of this study shows that the total efforts in terms of man-hours for the construction phase is found to be more than 78 percent in domestic public CM projects. In this context, this study proposes the policies and tasks for improving 'rigid man-hour placement', 'unreasonable CM fee standards', 'CM firm selection method', 'unreasonable business scope decision', and 'evaluation of owner's project management capability' in order to improve domestic CM Industry as well as to expand overseas CM market successfully.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.3
• /
• pp.19-27
• /
• 1982

Minimization of total routing and number of cuts has been adopted for the placement problem in LSI and printed wire board as the object function, recently. Although it is considered that in the general situation this object function reflects the final goal which is wiring of 100% of layout, it often seems to be insufficient because it does not exhibit partial wire congestion. This paper introduces a new concept called the wire congestion of segestion to get the partial wire congestion and proposes the object function to minimize the wire congestion of segmests. In order to optimize this object function, an effective heuristic algorithm is also suggestsl Experimental results show that this algorithm sustains its efficiency. The experimental consequences point out that if the total routing length is short, maximum wire congestion of segment is small and vice versa. Therefore control parameter, that is, congestion parameter, which mintnizes total length and concurrently reduces maximal wire congestion of segment, is obtained by experiment.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.1
• /
• pp.77-89
• /
• 2014

This study intends to establish a system to investigate and analyze various impacting factors to Rural Housings such as the relationship of characteristics of Rural Housings located in a Rural Village to the Village and a Unit Housing, to the External and Internal Spaces inside the Unit Housing and the Village, and to Living Characteristics of the Residents and Space from an integrated point of view. The results of this study are largely summarized as following four kinds. Rural Housing Survey System can be largely classified into three stages, and they are a Preliminary Survey, Basic Survey and In-depth Survey. Along with these, the scope of the survey contents can be divided into a survey result by a unit of village, of land, of housing, and of resident's opinion survey. Secondly, the surveys by village unit are on location properties, Village Identity, Street Network, Land Use, Landscape Features and Public Facilities, and consist of Literature, Discussion and Field Survey. Thirdly, the land Unit Surveys are on a Driveway, Gate Location, Housing Placement, Outer Space Design in a Yard and Outer Space Use Characteristics, and consist of Questionnaire and Field Surveys. For the fourth, the Housing Unit Surveys are on an Internal Space Design and Placement, and consist of Questionnaire and Field Surveys. Finally, the Resident Questionnaire Survey consisted of Entire Discussion Survey and a Household one, and then the Entire Survey was on the Village's History, Village's Characteristics, Cultivation Characteristics and Community Activities while an individual one was on Main Living Characteristics, Satisfaction and Utilization Characteristics.

• Korean Institute of Interior Design Journal
• /
• v.21 no.2
• /
• pp.174-185
• /
• 2012

The purpose of this study is to suggest planning strategy of tenant mix for UEC based on the final result of tenant mix analysis of five different research cases. The following is the comprehensive explanation about the result of tenant mix planning strategy for UEC currently in operation and when planning a new facility. First, overall research cases in this study show the tendency of following an old tradition, which stresses direct sales focusing on retail and dining adaptation. In order to compensate the defect, it is suggested to adopt new type of tenants with the functional mix of retail and dining with entertainment rather than decreasing the proportion of retail and dining tenant and increasing it of entertainment tenant. Second, the floorplan of UEC should adopt racetrack or circuit form that can stimulate shoppers' circular movement so to expose them to as much tenants as possible. Service consumption mode related tenants are required to place on the side or the edge of UEC, while retail consumption mode related tenants should be planned in the center. Among dining consumption mode related tenants, impulse dining tenants like a coffee shop should be placed at the turning point or at the end of the pathway, destination tenants like a restaurant and a food court, on the other hand, is needed to be placed in the center of the space. In case of Entertainment related tenants, destination tenants like bookstore or multiplex should also be placed at the end of the pathway, and on the way to those tenants, it is required to place general tenants that can share target customers with them. On the contrary, game center or record shop like tenants that can stimulate impulse sales should be placed on the visitor's main move or near the other destination tenants. Third, anchor tenants play an important role in gathering people to the UEC, and then induce them to visit the other tenants that are located near the anchors. Thus it is suggested to plan to place general tenants on the same floor as anchor tenants are placed so they can share the characteristics of target customers which create synergy effect.

• Archives of Plastic Surgery
• /
• v.42 no.3
• /
• pp.309-315
• /
• 2015

Background Breast projection is a critical element of breast reconstruction aesthetics, but little has been published regarding breast projection as the firm expander is changed to a softer implant. Quantitative data representing this loss in projection may enhance patient education and improve our management of patient expectations. Methods Female patients who were undergoing immediate tissue-expander breast reconstruction with the senior author were enrolled in this prospective study. Three-dimensional camera software was used for all patient photographs and data analysis. Projection was calculated as the distance between the chest wall and the point of maximal projection of the breast form. Values were calculated for final tissue expander expansion and at varying intervals 3, 6, and 12 months after implant placement. Results Fourteen breasts from 12 patients were included in the final analysis. Twelve of the 14 breasts had a loss of projection at three months following the implant placement or beyond. The percentage of projection lost in these 12 breasts ranged from 6.30% to 43.4%, with an average loss of projection of 21.05%. Conclusions This study is the first prospective quantitative analysis of temporal changes in breast projection after expander-implant reconstruction. By prospectively capturing projection data with three-dimensional photographic software, we reveal a loss of projection in this population by three months post-implant exchange. These findings will not only aid in managing patient expectations, but our methodology provides a foundation for future objective studies of the breast form.

• Journal of Korean Clinical Nursing Research
• /
• v.26 no.1
• /
• pp.59-74
• /
• 2020

Purpose: The purpose of this study is to investigate new nurses' needs for intravenous infusion therapy training by analyzing the current training status. Methods: This study examined the needs for intravenous infusion therapy training with 159 new nurses. The measurement tool consisted of 93 items developed based on intravenous therapy-related studies, and was evaluated on a 4-point Likert scale. For data analysis, SPSS/WIN 25.0 was used, and frequency, percentage, average, standard deviation, paired t-test, were performed. Results: The demand for intravenous therapy education was analyzed using a questionnaire composed of 8 areas, 16 sub-areas, and 93 items. According to the findings, post-ward placement intravenous therapy education(83.7%) is conducted more often than in preliminary education (72.2%). The demand for intravenous infusion therapy education did not differ significantly in preliminary and post-ward placement education (t=-.89, p=.376). While therapy skills were preferred in preliminary education, there were high demands for education content related to blood transfusion, central venous catheter, and drug use in continuing education. As for preferred teaching methods, lecture (38.2%) and simulation (26.7%) were most answered for preliminary education, while a range of methods were preferred for continuing education including lecture (31.1%), clinical practice (20.6%), preceptor training (19.8%), simulation (16.8%), and self-study (11.6%). Conclusion: For efficient training, it is required to provide different education contents and methods for each stage.

• Journal of Radiation Industry
• /
• v.11 no.3
• /
• pp.157-165
• /
• 2017

In this paper, we calculate the light photons collection efficiency of large-volume plastic scintillation detector mainly used for radiation portal monitor (RPM). A Monte Carlo light photon transport code, DETECT2000, were used to quantitatively evaluate light collection efficiency of plastic scintillation detector. DETECT2000 calculated the placement of light collection efficiency based on the energy spectrum. We calculated the light collection efficiency relative to the position of the energy spectrum that proportional to the placement of the source. The $850{\times}285{\times}65mm^3$ size of polyvinyl toluene (PVT) scintillator was used for measurements. Through DETECT2000 simulation, the light collection efficiency of $5{\times}5$ arrays were calculated and verification was performed by comparing with experimentally measured. And then, the corrected MCNP simulation by applying the light collection efficiency in $21{\times}13$ arrays was compared and analyzed. Comparing the Monte Carlo simulation with measured results, it shows an average difference of 10.1% in $5{\times}5$ arrays. Particularly, about twice of the difference was found in the edge of first column, which coupled with PMT. In whole $5{\times}5$ array, the overall ratio was the same except for the first column. And then comparing the energy spectra of the $21{\times}13$ array with and without the light collection efficiency, it shows a difference of 6.69% in Compton edge area. The DETECT2000 based light collection efficiency simulation showed well agreement with the point source experiment. And comparing with measured energy spectra, we could compare the differences according to whether or not the light collection efficiency was applied. As a results, it is possible to increase the accuracy and reliability of Monte Carlo simulation results by pre-calculating the light collection efficiency according to the PVT geometry by using the DETECT2000.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.778-785
• /
• 2020

Wireless mesh networks consist of mesh clients, mesh routers and mesh access points. The mesh router connects wireless network services to the mesh client, and the mesh access point connects to the backbone network using a wired link and provides Internet access to the mesh client. In this paper, a limited number of mesh routers and mesh access points are used to propose optimization algorithms for network design for wireless mesh networks. The optimization algorithm in this paper has been applied with a sub-subscription algorithm, which is one of the meta-heuristic methods, and is designed to minimize the transmission delay for the placement of mesh routers and mesh access points, and produce optimal results within a reasonable time. The proposed algorithm was evaluated in terms of transmission delay and time to perform the algorithm for the placement of mesh routers and mesh access points, and the performance evaluation results showed superior performance compared to the previous meta-heuristic methods.