• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.238-241
• /
• 2000

A fingerprint core-point detection algorithm is presented in this paper. Core-point is useful for fingerprint classification and also for the fingerprint verification since it giver a reference to a fingerprint. Traditional methods of finding the core-point is introduced. These methods are the method using poincare index and the method using sine component of ridge directions. The proposed method is modified algorithm of the latter using the poincare index. The experimental results show that the proposed algorithm achieves almost the same accuracy with faster speed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9C
• /
• pp.860-867
• /
• 2003

In this paper, an efficient core point detection method using orientation pattern labeling is proposed in fingerprint image. The core point, which is one of the singular points in fingerprint image, is used as the reference point in the most fingerprint recognizing system. Therefore, the detection of the core point is the most essential step of the fingerprint recognizing system, it can affect in the whole system performance. The proposed method could detect the position of the core point by applying the labeling method for the directional pattern which is come from the distribution of the ridges in fingerprint image and applying detailed algorithms for the decision of the core point's position. The simulation result of proposed method is better than the result of Poincare index method and the sine map method in executing time and detecting rate. Especially, the Poincare index method can't detect the core point in the detection of the arch type and the sine map method takes too much times for executing. But the proposed method can overcome these problems.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.1
• /
• pp.123-131
• /
• 1995

다주파수 입력을 갖는 강한 비선형 시스템의 유사주기 (quasi-periodic) 해를 해석하기 위하여 개선된 고정 점법(FPA:Fixed Point Alogrithm)을 개발하였다. 안정성 및 천이 특성을 판별하기 위하여 사용되어지는 Floquest 지수인 해석적 자코비언을 구하기 위하여 Poincare 맵상에서 이산 적분법을 새로이 고안, 사용하였다. 본 방법의 우수성을 입증하기 위하여 2개의 주파수 입력을 갖는 선형 시스템과 비선형 시스템을 예로 사용하였다. 본 방법을 이용하여 비선형 시스템에서 발생한 복잡한 chaos 현상을 체계적으로 해석하였다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.6
• /
• pp.95-105
• /
• 2003

A novel reference point detection method is proposed by exploiting tile gradient probabilistic model that captures the curvature information of fingerprint. The detection of reference point is accomplished through searching and locating the points of occurrence of the most evenly distributed gradient in a probabilistic sense. The uniformly distributed gradient texture represents either the core point itself or those of similar points that can be used to establish the rigid reference from which to map the features for recognition. Key benefits are reductions in preprocessing and consistency of locating the same points as the reference points even when processing arch type fingerprints. Moreover, the new feature extraction method is proposed by improving the existing feature extraction using filterbank method. Experimental results indicate the superiority of tile proposed scheme in terms of computational time in feature extraction and verification rate in various noisy environments. In particular, the proposed gradient probabilistic model achieved 49% improvement under ambient noise, 39.2% under brightness noise and 15.7% under a salt and pepper noise environment, respectively, in FAR for the arch type fingerprints. Moreover, a reduction of 0.07sec in reference point detection time of the GPM is shown possible compared to using the leading the poincare index method and a reduction of 0.06sec in code extraction time of the new filterbank mettled is shown possible compared to using the leading the existing filterbank method.

• Journal of the korean society of oceanography
• /
• v.34 no.1
• /
• pp.22-35
• /
• 1999

The response of the tidal waves to friction effect is investigated in terms of deformation of Kelvin and Poincare modes, The 1st Poincare mode does not exist over the low frequency region less than the critical frequency of omega ${\omega}$${\sqrt{2f}}$, with ${\gamma}$/f=0.0, but the mode comes to exist in the presence of friction. When friction exists and its magnitude increases, the wave number increases, indicating that the wave length of the Poincare mode becomes increasingly short with increasing friction. The damping coefficient gradually increases with increasing friction over the high frequency region, but the trend is reversed over the low frequency region. In case of Kelvin wave the present study substantiates the characters of Kelvin wave examined by Mofjeld (1980) and Lee (1988). Based on the examination of frictional effects on the tidal wave propagation, the co-oscillating tides in the Yellow Sea are examined by considering both the head opening and bottom friction effects. As friction is introduced and increased in addition to partial opening at bay head, the location of the amphidromic point near the Shantung Peninsula moves more southwestward. This southwestward movement of the amphidromic point is increasingly compatible with the observed location of Ogura's or Nishida's tidal chart of the M$_2$ tide.

• Journal of Theoretical and Applied Mechanics
• /
• v.1 no.1
• /
• pp.29-67
• /
• 1995

A procedure is formulated, in this paper, to compute the bifurcation modes born by the stability change of normal modes, and to compute the forced responses associated with bifurcation modes in inertially and elastically coupled nonlinear oscillators. It is assumed that a saddle-loop is formed in Poincare map at the stability chage of normal modes. In order to test the validity of procedure, it is applied to one-to-one internal resonant systems in which the solutions are guaranteed within the order of a small perturbation parameter. The procedure is also applied to the exact system in which normal modes are written in exact form and the stability of normal modes can be exactly determined. In this system the stability change of normal modes occurs several times so that various types of bifurcation modes are created. A method is described to identify a fixed point on Poincare map as one of bifurcation modes. The limitations and advantage of proposed procedure are discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.295-300
• /
• 1996

In this study, the dynamic instabilities of a nonlinear elastic system subjected to follower force are investigated. The two-degree-of-freedom double pendulum model with nonlinear geometry, cubic spring, and linear viscous damping is used for the study. The constant and periodic follower forces are considered. The chaotic nature of the system is identified using the standard methods, such as time histories, phase portraits, and Poincare maps, etc.. The responses are chaotic and unpredictable due to the sensitivity to initial conditions. The sensitivities to parameters, such as geometric initial imperfections, magnitude of follower force, and viscous damping, etc. is analysed. The strange attractors in Poincare map have the self-similar fractal geometry. Dynamic buckling loads are computed for various parameters, where the loads are changed drastically for the small change of parameters.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2002.11a
• /
• pp.417-420
• /
• 2002

본 논문에서는, 지문인증 시스템에 있어서 방향성분의 통계적 방법을 이용한 reference point 검출 알고리즘과 이 reference point를 중심으로 하여 기존의 filterbank의 단점을 개선한 feature 추출 알고리즘을 소개한다. 제안한 reference point검출 알고리즘은 기존의 Poincare방법의 단점인 세밀한 전처리 과정과 arch type의 지문에 대해 장점을 가지며, 개선한 filterbank방법은 기존의 filterbank방법보다 reference point의 검출 위치에 덜 민감하며, 좀 더 높은 인증률을 보였다.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.429-432
• /
• 2001

지문영상의 특이점(Singularities) 중의 하나인 Core Point는 대부분의 지문인증 시스템에서 기준점(Reference Point)으로 사용되고 있다. 또한 Core Point의 검출은 전체 지문인증 시스템의 가장 기본적인 단계로서 전체 시스템의 성능에 많은 영향을 준다. 본 논문에서는 지문 영상의 방향 패턴(Orientation Pattern)과 이의 리레이블링(Re-labeling)을 이용한 Core Point 검출 방법을 제안하고, 기존의 Poincare Index를 이용하는 방법 및 Sine Map을 이응한 방법과 비교, 분석하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.6
• /
• pp.75-85
• /
• 1994

주기함수의 외력을 갖는 버선형 시스템의 다양한 응답 특성을 구하기 위해 새로운 조화함수법(HBM)을 적용하였다. 새로운 조화함수법의 해는 비선형항을 선형항으로부터 따로 분리시킨 다음 같은 주파수 성분을 갖는 비선형 방정식들을 Newton-Raphosn법으로 풀어서 구하였다. 다양한 천이(Bifurcation) 특성을 해석적으로 판별하기 위하여 HBM의 해를 이용하여 구한 섭동 방정식의 Floquet 지수의 고유해를 사용하였다. 새로이 개발한 HBM과 천이 판별법을 1차원 비선형항을 갖는 구조물인 ALP(Articulated Loading Platform) 모델과 다차원인 비선 형 회전체 모델에 적용시켜 HBM의 해의 정확성과 이들 시스템의 천이 특성의 하나인 Chaos 존재를 확인 하였다.