• Journal of Environmental Science International
• /
• v.25 no.1
• /
• pp.181-190
• /
• 2016

Regional air quality regulation is a system that allows the Minister of Environment to designate the local area as air quality control region where the concentrations of air pollutants are exceeding the environmental standards, and the local governments that administrate the regulated area have to develop and practise a plan for reducing the air pollutants. From the data observed yearly by the monitoring stations in 8 provincial cities with more than 0.5 million people was judged the compliance with air quality standards in each municipality for the period of 2003 to 2013. As the result of investigation on air pollutants concentrations of each city, it was found that there was no station that exceeds the ambient air quality standards of CO, $SO_2$ and 24-hour $NO_2$. But all municipalities exceeded the standards of 8-hour $O_3$, annual and 24-hour $PM_{10}$, and therefore 8 municipalities can be designated to be under the local air regulation. For the annual $NO_2$ were the monitoring sites necessary requirements for designation of the air quality regulation region in Cheongju, Cheonan, Daejeon and Gwangju area. Incase of 1-hour $O_3$, some of stations in Pohang, Cheongju, Cheonan and Changwon area were over the designation standards for the air quality control region.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.3
• /
• pp.51-61
• /
• 2021

Following the previous study, we report a complementary dating data on the silty layers deposited in paleo-tidal conditions of the study area, Dangjeong-ri, Seocheon-gun and suggest coastal terrain development processes over the past 200,000 years. Based on the dating results, the silty layers distributed up to 25 m above mean sea level were deposited between 171 and 183 ka, and the gravel layer deposited in a fluvial environment of a paleo-Dangjeong stream was found to have formed between 78 and 83 ka. Considering relative altitudes of distribution, an uplift rate of the study area in the western coast is judged to be relatively 0.5~0.7 low to that of Pohang area in the eastern coast. Compared to Busan and Sacheon areas in the southern coast, it is assumed that an uplift rate of the study area shows a similar level with those during the late Quaternary.

• The Journal of Engineering Geology
• /
• v.28 no.2
• /
• pp.313-324
• /
• 2018

In order to study the earthquake precursor in the Korean peninsula, long-term variations of chemical composition, radon-222, and water level were measured at depths (-60 m, -100 m) in the groundwater monitoring wells of the Daejeon and the Cheongwon area. The pH and electrical conductivity of groundwater in the monitoring wells showed some relationship with the Pohang earthquake. The ${HCO_3}^-$ and $Cl^-$ concentration of groundwater in the Daejeon and $Mg^{2+}$, $Cl^-$ and ${NO_3}^-$ in the Cheongwon showed some relation with the Pohang earthquake. However, it is not distinct to find the relationship between their variation and earthquake. The radon-222 concentration in Daejeon was observed a significant increase from a minimum of 162 Bq/L prior to the earthquake to 573 Bq/L right after the earthquake, that indicating a strong correlation with earthquakes. In the case of groundwater levels, it can not find some correlation between earthquakes and continuous decreasing trend in the monitoring wells of Daejeon and Cheongwon area. However, water level of a national groundwater observation well within 10 kilometers of Pohang epicenter was recorded as an abrupt drop right before the earthquake. Conclusively, although the location of monitoring wells is more than 180 kilometers apart from the epicenter of the Pohang earthquake, the radon gas in groundwater can be considered as a reliable candidate among earthquake precursors. The pH, electrical conductivity, ${HCO_3}^-$ and $Cl^-$ among hydrochemicals showed some correlation with earthquake should be monitored during a longer term to recognize distinctly as a precursor of earthquake.

• Korean Journal of Crystallography
• /
• v.16 no.2
• /
• pp.89-101
• /
• 2005

Among many material processing related issues for successful scaling down of devices for the next 10 years or so, the advanced gate stack and interconnect technology are two most critical research areas, which need technical innovation. The introduction of new metallic films and appropriate processing technologies are required more than ever. Especially, as the device downscaling continues well into sub 50 nm regime, the paradigm for metal nano film deposition technique research has been shifted to high conformality, low growth temperature, high quality with uniformity at large area wafers. Regarding these, ALD has sparked a lot of interests for a number of reasons. The process is intrinsically atomic in nature, resulting in the controlled deposition of films in sub-monolayer units with excellent conformality. In this paper, the overview on the current issues and the future trends in device processing technologies related to metal nano films as well as the R&D trends in these applications will be discussed. The focus will be on the applications for metal gate, capacitor electrode for DRAM, and diffusion barriers/seed layers for Cu interconnect technology.

• ETRI Journal
• /
• v.29 no.2
• /
• pp.189-200
• /
• 2007

This paper addresses the localization and navigation problem in the movement of service robots by using invisible two dimensional barcodes on the floor. Compared with other methods using natural or artificial landmarks, the proposed localization method has great advantages in cost and appearance since the location of the robot is perfectly known using the barcode information after mapping is finished. We also propose a navigation algorithm which uses a topological structure. For the topological information, we define nodes and edges which are suitable for indoor navigation, especially for large area having multiple rooms, many walls, and many static obstacles. The proposed algorithm also has the advantage that errors which occur in each node are mutually independent and can be compensated exactly after some navigation using barcodes. Simulation and experimental results were performed to verify the algorithm in the barcode environment, showing excellent performance results. After mapping, it is also possible to solve the kidnapped robot problem and to generate paths using topological information.

• Journal of Environmental Science International
• /
• v.14 no.11
• /
• pp.1071-1079
• /
• 2005

Using single cell gel electrophoresis, DNA single strand breaks were determined in various marine organisms. DNA damage on fish blood cells was detected to know whether there was a difference between Incheon, Pohang, Masan, and Tongyeong as a control site. Tongyeong showed the lowest DNA damage among the study areas. Mussels, transplanted to Masan Bay for one month, revealed high DNA damage at sites with high economical activity. In two weeks exposure of polychaete to Incheon sediments, higher DNA damage was detected in the sediment adjacent to Incheon harbor than open sea. These results suggested that the marine organism from the polluted area revealed a relatively high DNA damage. In addition, these areas might be contaminated with genotoxic compounds and comet assay was useful as a bioassay to detect DNA damage in marine organisms.

• Journal of the Korean Society of Food Culture
• /
• v.26 no.1
• /
• pp.63-71
• /
• 2011

The purpose of this study was to establish different levels of learning satisfaction concerning bakery and confectionery institute students in relation to their educational environment as well as to determine the relationships between variables. A questionnaire was distributed to 260 students enrolled in the bakery and confectionery institute at Gyeongju in the Pohang and Ulsan area, and 242 were used in the final analysis. Collected data were statistically analyzed using SPSS 12.0 Windows. Results of this study can be summarized as follows. The students were mostly satisfied with the learning environment and teaching methods of the institute. A significant difference was observed between male and female students for recognizing teaching methods and major recognition. Furthermore, the educational environment and major recognition of students were positively related with learning satisfaction. Therefore, the staff at the bakery and confectionary institute should provide the proper curriculum and facilities for the students.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.70-74
• /
• 1999

Remote sensing (RS) data show the surfaces of the earth only but cannot provide the shape data of building sides. The proposed method recovers a 3D shape of building sides from stereo images. Its result shows a higher possibility for recovering a large shaped object by overcoming the difficulties of traditional stereo matching techniques. The urban area will be visualized more realistically than the current model based on graphic and vector data.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.1
• /
• pp.87-93
• /
• 2001

A reliable analytic model that determines the exit cross sectional shape a workpiece(material) in round-oval (oroval-round) pass sequence has been developed. The exit cross sectional shape of an outgoing workpiece is predicted by using the linear interpolation of the radius of curvature of an incoming workpiece and that of roll groovw to the roll axis direction. The requirements placed on the choice of the weighting function were to ensure boundary conditions specified. The validity of the analytic model has been examined by not rod rolling experiment with the roll gap and specimen size changed. The exit cross sectional shape and area of the workpiece predicted by the proposed analytic model were good agreement with those obtained experimentally. We found that the analytic model has not only simplicity and accuracy for practical usage but also save a large amount of computational time compared with finite element method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.305-306
• /
• 2006

This paper introduces a radio-wave interference assessment of wind turbines that were planned to be installed at Homi-Cape in Pohang region where wind resource has been evaluated worthwhile developing a wind farm. In that area, AM radio station with two antennas and a harbor radar facility are located so that radio-wave coupling is inevitable if the wind farm is designed without considering radio-wave environmental impact. A low-frequency analysis using MoM (Method of Moment) is used to examine interference effect caused by wind turbines and an optimal layout minimizes coupling effect is presented.