• The Korean Journal of Ecology
• /
• 제28권6호
• /
• pp.365-373
• /
• 2005

Understanding the relation of water environmental factors and vegetation is critical to restoration and management of wetlands. To reveal relationships between representative plant groups and water environments, we measured cover and abundance of plant species, water depth, temperature, pH, conductivity, dissolved oxygen, $NH_4$-N, $NO_3$-N, and $PO_4-P$ concentration in water in Wangsuk stream (WS) and Gwarim reservoir (GR). This study was conducted monthly from May to October, 2004. Six vegetation groups $(W1{\sim}W6)$ in WS and five vegetation groups $(G1{\sim}G5)$ in GR were identified using TWINSPAN. WS was characterized by Phragmites japonica, Digitaria sanguinalis, Phalaris arundinacea, Beckmannia xyzigachne and Persicara hydropiper, Persicaria thunbergii, Typha angustifolia. GR was characterized by T. angustifolia, Scirpus tabernaemontani, P. thunbergii, Humulus japonicus and Scirpus fluviatilis, Typha orientalis, Zizania latifolia. The vegetation in WS experienced greater seasonal changes than in GR. A correspondence analysis suggests that water depth was the major environmental factor influencing the distribution of most plants communities in both wetlands.

• 한국환경보건학회지
• /
• 제31권2호
• /
• pp.172-178
• /
• 2005

A laboratory experiment was performed to investigate simultaneous removal of phosphorus and nitrogen from raw sewage by intermittently aerated activated sludge process packed with aluminum and silver plate. Two continuous experimental process, i.e. an intermittently aerated activated sludge process, and an intermittently aerated activated sludge process with an aluminum and silver plate packed into the reactor were compared. The pitting corrosion of aluminum does not affect the performance of the biological treatment. The amounts of Al eluted from aluminum plate 17 mg to 60.6 mg in this experimental conditions, and Al/P mole ratio were from 3.31 to 11.25. The total nitrogen removal efficiency in Run E were $60.6\%$ at the HRT of 12 hours. The effluent $PO_4-P$ concentration as low as $1.0\;mg/\iota$ could have been obtained during the continuous experiment in Run E at HRT of 12 hours.

• 한국세라믹학회지
• /
• 제44권5호
• /
• pp.144-147
• /
• 2007

Calcium metaphosphate (CMP) nanofibers with a diameter of ${\sim}600nm$ were prepared using electrospun CMP/polyvinylpyrrolidone (PVP) fibers through a process of drying for 5 h in air followed by annealing for 1 h at $650^{\circ}C$ in a vacuum. The viscosity of the CMP/PVP precursor containing 0.15 g/ml of PVP was 76 cP. Thermal analysis results revealed that the fibers were crystallized at $569^{\circ}C$. The crystal phase of the as-annealed fiber was determined to be ${\delta}-CMP\;({\delta}-Ca(PO_3)_2)$. However, the morphology of the fibers changed from smooth and uniform (as-spun fibers) to linked-particle characteristics with a tubular form most likely due to the decomposition of the inner PVP matrix. It is expected that this large amount of available surface area has the potential to provide unusually high bioactivity and fast responses in clinical hard tissue applications.

• 자원리싸이클링
• /
• 제5권3호
• /
• pp.9-16
• /
• 1996

철강슬래그를 이용하여 아스팔트 콘크리트 충전제로서 적용가능성을 확인하고 사용하기 위해 시행되었다. 고로 수재슬래그, 고로 괴재슬래그와 전로슬래그를 아스콘 충전제로 재활용하기 위하여 슬래그를 분해하여 물리적, 화학적 성질을 조사하여 아스콘 충전제로의 사용가능성을 확인하였다. 아스팔트 콘크리트 제조시 200mesh 이하의 슬래그 분말을 충전후에 측정한 여러 가지 기계적 성질은 KS규격을 충족시켰다. 아스팔트와의 혼합온도는 140~16$0^{\circ}C$이었고, 밀도, 안정도, 공극률과 포화도는 각각 2.37g/㎤, 810kg, 3.4%와 80.4%이었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.642-646
• /
• 2004

시스템 패킷 인터페이스 4레벨 2단계(System Packet Interface Leve1 4 Phase 2)는 10Gbps 이더넷 응용뿐만 아니라, OC-192 대역폭의 ATM 및 POS를 통한 패킷 또는 셀 전송을 위한 물리계층과 링크계층 소자간의 인터페이스이다. 본 논문에서는 시스템 패킷 인터페이스 4레벨 2단계(SPI-4.2)에 대한 연구와 C언어를 이용한 성능평가를 토대로 모듈을 VHDL언어를 이용하여 설계하였다. 성능평가시 확인된 짧은 패킷이 유입되었을 때 PCW와 다음 PCW의 거리를 16바이트 이상을 유지하기 위해 ICW가 삽입되어 많은 오버헤드를 발생시켰다. 작은 패킷이 유입되었을 때 오버헤드를 최소화하기 위해 ICW생성을 최대한 제한하게 설계하여 짧은 패킷 유입시의 오버헤드를 감소하는 SPI-4.2 인터페이스 수신부 모듈을 설계하였다. 설계한 모듈은 라인당 720Mbps를 지원하여 총 대역폭이 11.52Gb/s의 전송률을 나타내어 더욱 안정적으로 패킷을 인터페이스 할 수 있다. XilinxISE 5.1i 툴을 이용하여 VHDL언어로 설계하였고, Model_SIM 5.6a를 이용하여 시뮬레이션 하였다. SPI-4.2 인터페이스 모듈은 기가비트/테라비트 라우터, 광학 크로스바 스위치 및 SONET/SDH 기반의 수신 시스템에서 라인카드로 사용할 경우 적합할 것으로 사료된다.

• Membrane and Water Treatment
• /
• 제6권4호
• /
• pp.293-308
• /
• 2015

Palm oil mill effluent (POME) was produced in huge amounts in Malaysia, and if it discharged into the environment, it causes a serious problem regarding its high content of nutrients and high levels of COD and BOD concentrations. This study was devoted on POME treatment and purification using an integrated process consisting of microalgae treatment followed by membrane filtration. The main objective was to find the optimum conditions as retention time and pH in the biological treatment of POME. Since after the optimum conditions there is a diverse effect of time and the process become costly. According to our knowledge, there is no existing study optimized the retention time and percentage removal of nutrients for microalgae treatment of POME wastewater. In order to achieve with optimization, a second order polynomial model regression coefficients and goodness of fit results in removal percentages of ammonia nitrogen ($NH_3-N$), orthophosphorous ($PO_4{^{-3}}$), COD, TSS, and turbidity were estimated. WinQSB technique was used to optimize the objective function of the developed model, and the optimum conditions were found. Also, ultrafiltration membrane is useful for purification of POME samples as verified by experiments.

• Corrosion Science and Technology
• /
• 제20권3호
• /
• pp.129-142
• /
• 2021

Effects of corrosion inhibitors (i.e., sodium nitrite, sodium hexametaphosphate, trimethylamine (TEA), sugar, and urea) on the corrosion resistance of carbon steel in CaCl₂ solution were investigated. The test solution was designed with response surface methodology of design of experiments (DOE) in the range of 0 ~ 50 ppm for NaNO₂, 0 ~ 200 ppm for (NaPO₃)₆, 0 ~ 2000 ppm for TEA, 0 ~ 3000 ppm for sugar, 0 ~ 200 ppm for urea with 3 wt% CaCl₂. The corrosion potential and the corrosion rate were measured with potentiodynamic polarization tests and analyzed statistically to find main effects of inhibitor concentrations and interactions between them. As a result, hexametaphosphate was the most effective compound in reducing the corrosion rate. Sugar also reduced the corrosion rate significantly possibly because it covered the surface effectively with a high molecular weight. The inhibiting action of sugar was found to be enhanced by adding trimethylamine into the solution. Nevertheless, trimethylamine did not appear to be effective in inhibiting corrosion by itself. However, urea and sodium nitrite showed almost no inhibition on corrosion resistance of steel.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.81-82
• /
• 2022

Al and Zn are used to protect the steel structures from corrosion. In the present studies, 15Al-85Zn alloy wires has been used for the deposition of coating by arc thermal spray process. Moreover, this process of coating exhibited severe defects formation, therefore, this coating was post-treated with different concentrations i.e. 0.05, 0.1 and 0.5M sodium hexa meta phosphate (Na6[(PO3)6]: SHMP) to fill to defects of deposited coatings and assessed their corrosion resistance in 3.5 wt.% NaCl solution with exposure periods. After the treatment, the porosity of the coating reduced significantly by formation of composite oxide films onto the coating surface. Initially, 0.5 M SHMP treated coating exhibited highest in total impedance due to significant reduction of porosity but once the exposure periods are extended, the composite oxides are dissolved, thus, total impedance is decreased.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권3호
• /
• pp.5-8
• /
• 2008

On highly-textured IBAD-MgO templates, we have tried to find proper buffer layers among various candidate materials, including $LaMnO_3$ (LMO), $La_2Zr_2O_7$ (LAO), $LaAlO_3$ (LAO), $LaGaO_3$ (LGO), $NdGaO_3$ (NGO), and $BaZrO_3$ (BZO). All buffer layers were deposited on the IBAD-MgO templates by KrF pulsed laser deposition(PLD). LAO layer showed an armorphous phase. LZO, LGO, and NGO layers showed polycrystalline growth. Only LMO and BZO layers exhibited c-axis oriented biaxially textured films. Optimally processed LMO buffer layer at deposition temperature of $750^{\circ}C$ and $PO_2$ of 100mTorr exhibited ${\triangle}{\phi}$ value of ${\sim}-5.2^{\circ}$ and RMS roughness of 5.6nm. Interestingly, BZO buffer layers with ${\triangle}{\phi}$ values of ${\sim}-6^{\circ}$ could be routinely produced over a wide PLD processing condition.

• 농약과학회지
• /
• 제4권1호
• /
• pp.64-70
• /
• 2000

아인산의 고추 토마토 역병 및 노균병에 대한 방제 효과를 성체 식물체를 이용하여 온실에서 검정한 결과, 고추 역병의 경우 $1,408{\mu}g$ a.i./mL ($H_{3}PO_{3}$) 농도 처리에서 91%와 80%의 예방 및 치료효과를 보였다. 토마토 역병의 경우는 $1,408{\mu}g$ a. i./mL 처리에서 각각 63.4%와 13.0%의 예방 및 치료효과를 보여 고추 역병에 비해 효과가 저조하였다. 토마토 역병균의 유주자낭의 밀도가 $1{\times}10^{3}{\sim}1{\times}10^{4}/mL$일 경우 방제 효과가 높았다. 고추역병균에 대한 약제지속효과에 있어서 아인산은 경엽처리 4일 후에도 94%의 높은 방제 효과를 보여 대조약제인 포롬 수화제에 비해 효과가 지속됨을 알 수 있었다. 오이 노균병에 대해서는 $1,408{\mu}g$ a.i./mL 처리는 82와 62%의 예방 및 치료효과를 보였다. 아인산의 경엽처리는 식물의 생육을 촉진시키는 것으로 나타났다.