• Analytical Science and Technology
• /
• v.25 no.6
• /
• pp.460-466
• /
• 2012

An environmentally friendly, so-called green, high performance liquid chromatography method was developed and validated for the determination of trans, trans-muconic acid (t,t-MA) in human urine as a biomarker of benzene exposure. After urinary t,t-MA was extracted and enriched using solid-phase extraction, a MF-Ph1 SG80 ($150mm{\times}2.0mm$ I.D., 5 ${\mu}m$) column with a mobile phase of 10 mM $KH_2PO_4$ containing 0.1% $H_3PO_4$ was used for isocratic separation of t,t-MA with UV detection at 259 nm. The calibration curve was constructed in the range of 0.1-5.0 mg/L with good linearity ($r^2$=0.9992). The intra-day and inter-day precision (as RSD) were 0.9-8.5% and 3.1-4.5%, respectively. The average recovery ranged from 97.5% to 101.7%. The green sample preparation and separation with no organic solvents were successfully achieved. The validated method would be suitable for the routine biological monitoring of benzene exposure in the occupational settings.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.112-120
• /
• 2014

Purpose: This study compared the shear bond strength of heat pressed and feldspathic porcelain to metal. Through thermocycling, the clinical aspect of heat pressed porcelain fused metal was estimated. Materials and Methods: 90 non-precious metal specimens were made ($4{\times}4{\times}8 mm$) and divided to three groups. All spicimens were treated and built-up with the porcelain ($4{\times}4{\times}3 mm$) by 2 different methods according to group: Group I: $Inspiration^{(R)}$, Group II: Ivoclar, IPS $Inline^{(R)}PoM$, Group III: GC Initial IQ-One $Body^{(R)}PoM$. The half of each group's specimens were thermocycled. All specimens' shear bond strength were measured by Instron universal testing machine. Exact measuring point was far 1 mm from porcelain/metal interface to the porcelain side. For the statistical analysis, 2-way ANOVA was used. Results: In no-thermocycling specimens, the shear bond strength showed no statistical significance between each group (P > 0.05). In comparison between nothermocycling and thermocycling specimens in each group, the shear bond strength was decreased according to thermocycling, but there was no statistical significance (P > 0.05). In thermocycling specimens, there was no statistical significance between each group (P > 0.05). Conclusion: In feldspathic porcelain and other two types heat pressed porcelain, there was no statistical difference in the shear bond strength of porcelain to metal. The heat pressed porcelain seems to be clinically useful for the aspect of the shear bond strength.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.641-648
• /
• 2003

In a batch mode treatment process, which electrolyzes the wastewater after derivation of N-P crystal formation and recovery, the characteristics of pollutant removal induced with the changes of loading rate and hydraulic retention time were studied. $MgCl_2$ was used as Mg source for the formation of struvite and the molar ratio of $MgCl_2$ to $PO_4^{3-}$ in influent was 1.3. When analyzing the average treatment efficiencies and removal characteristics obtained from four separate operations (Run I, II, III, IV), removal efficiencies of PO43- was not function of its loading rate. Under a condition of sufficient aeration and Mg source provided, over 88% of $PO_4^{3-}$ was eliminated by the formation of MAP without any pH adjustment, in spite of loading rate variation. An optimum-loading rate of NH4-N to achieve high removal efficiency was approximately $100g/m^3/d$. Below that loading rate, the removal of NH4-N was proportional to the loading rate into the system, and hence stable and high removal efficiency, over 90%, was achieved. However, when the loading rate increased over that rate, removal efficiency began to drop and fluctuate. Removal efficiency of TOCs was dependant upon the hydraulic retention time ($r^2$=0.97), not upon the loading rate. Stable and high color removal (94%) was obtained with 2 days of HRT in electrolysis reactor.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.292-295
• /
• 2015

The effect of Ligand Binding energy in quantum rod (CdS/ZnS) plays a critical role in anisotropic growth. As mimicking large chain of ligands and using the head of the chain, I plan to bind the quantum rod and ligands so that it can grow well consequently. So the ultimate goal of this study is on how ligand binding can affect the growth of this quantum rod. There are preferred surfaces between the quantum rod and ligands, and we empirically know that ligands which bind the quantum rod; Phosphoric oxide (PO), Phosphoric acid(PA), Carboxylic acid(CA), Trimethylamine(TMA), have strong tendency to be attached on the surfaces of CdS/ZnS; ($11{\bar{2}}0$), ($10{\bar{1}}0$), ($000{\bar{1}}$), (0001). I virtually bond the surface and the ligands, and calculated the ligand binding energy after optimizing their structure, utilizing EDISON simulator. After all, I figured out how they are linked each other and how the quantum rod grows.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1131-1138
• /
• 2004

The objective of this study was to investigate the effects of different sources of Ca and P on urine and ileal digesta pH, and ammonia ($NH_{3}$), methane ($CH_{4}$), and odor emission. In experiment 1, eight pigs (commercial three-way cross; initial BW 67$\pm$3 kg) were arranged in a repeated 4$\times$4 Latin Square design. All pigs were equipped with a T-cannula in the distal ileum. Four corn-soybean meal based diets were formulated. Diet 1 was the control in which dicalcium phosphate (DCP) and limestone ($CaCO_{3}$) were used as the sources of inorganic P and Ca. In Diets 2 and 3, ${H_{3}}{PO_{4}}$, monocalcium phosphate (MCP), and $CaSO_{4}$replaced DCP and $CaCO_{3}$ as the inorganic sources of P and Ca. Diet 4 was similar to Diet 1 except that it was fortified with HCl to provide an acid load similar to that of diet 2. Urine and ileal digesta pH were determined in pigs fed each of these diets. In Exp. 1, urine pH decreased (p<0.05) in animals consuming diets containing ${H_{3}}{PO_{4}}$-$CaSO_{4}$ (5.85$\pm$0.38) and MCP-$CaSO_{4}$(5.73$\pm$0.30) compared with the DCP-$CaCO_{3}$ diet (6.89$\pm$0.24). In the pigs consuming ${H_{3}}{PO_{4}}$-$CaSO_{4}$, ileal digesta pH decreased compared with the control (5.52$\pm$0.28 vs. 6.66$\pm$0.17; p<0.05). Based on the results of Exp. 1, a total of four trials were performed in environmental chambers for determining how $NH_{3}$, $NH_{4}$, and odor were affected by the different dietary Ca and P sources (Exp. 2). In Exp. 2, pigs fed the ${H_{3}}{PO_{4}}$-$CaSO_{4}$ diet had decreased (30%) $NH_{3}$ emissions compared with the control (p<0.05). Also, a combination of MCP-$CaCO_{3}$-$CaCl_{12}$ decreased $NH_{3}$ emission by 15% (p<0.05). Emission of $CH_{4}$ was decreased only with the ${H_{3}}{PO_{4}}$-$CaSO_{4}$ diet with 14% (p<0.05). Odorant emission of phenolics and volatile fatty acids increased roughly three-fold with the DCP-$CaSO_{4}$ diet but was not affected by other test diets. In conclusion, acidogenic Ca and P sources in swine diets can decrease the urinary pH and reduce $NH_{3}$ and $CH_{4}$ emission from swine facilities.

• Radiation Oncology Journal
• /
• v.8 no.1
• /
• pp.1-6
• /
• 1990

In the present study, a perfluorchemical emulsion (Fluosol-DA $20\%$) did not alter $D_o\;and\;D_q$ values on cell survival curve, indicating that the lack of a direct effect of Fluosol-DA $20\%$ on cellular radiosensitivity in vitro. The effect of Fluosol-DA $20\%$ injection in combination with carbogen breathing was determined on the hypoxic cell fraction in SCK tumors. The hypoxic cell fraction in control SCK tumors was 0.39. This value decreased to 0.05 when the mice were i.v. injected with 12 ml/kg of Fluosol-DA $20\%$ in a carbogen atomosphere. The measured mean and median $PO_2$ values with a microelectrode in the control tumors was 9 mmHg and 4 mmHg, respectively. The treatment of the SCK tumors in the host mice with injected Fluosol-DA $20\%$ in combination with carbogen breathing increased the mean and median $PO_2$ values to 67 mmHg and 62 mmHg, respectively. Using carbogen breathing alone caused a moderate increase of tumor $PO_2$. But Fluosol-DA $20\%$ injection alone caused little change $PO_2$ in the tumor. It was concluded that the combination of Fluosol-DA injection and carbogen breathing is an effective means to improve oxygenation of tumors.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.4
• /
• pp.267-272
• /
• 2007

Various kinds of RI wastes are discharged from licensed organizations of radioisotopes les such as hospitals and clinic organizations, educational organizations, research institutions, and public organizations. Radioiodines such as $^{125}I\;and\;^{131}I$ are radioisotopes mainly used in nuclear medicine and industry. A method for the determination of radioiodines in RI wastes has been applied to measure low level activity using acid decomposition method and HPGe gamma ray spectrometer. Prior to analysis of real samples, $^{131}I$ reference solution and 10 g of yellow tissue paper was added to flask in mantle and was heated in 100 mL of 0.4 N $K_2Cr_2O_7$ and 100 mL of 9 M $H_2SO_4$, and then distilled after adding 10 mL of 30% $H_2PO_3$ and 1 mL of 30% $H_2O_2$. The condensed iodine by circulator was extracted into $CCl_4$, then back-extracted into the aqueous phase with 10 mL of 5% $K_2SO_2$ solution. Finally, $^{131}I$ was measured at 364.48 keV using HPGe gamma ray spectrometer after precipitation and filtration. Chemical yield of three steps such as acid decomposition process, chemical separation process, and precipitation and filtration process was more han 94% respectively, MDA(Minimum Detectable Activity) of $^{131}I$ at this analytical condition was 0.6 Bq/g.

• YAKHAK HOEJI
• /
• v.25 no.1
• /
• pp.1-7
• /
• 1981

Glycyrrhizin (GA) content in licorice was determined by a couple of methods using HPLC, respectively. In Method(I), GA content itself was determined from the licorice aqueous extract, while in Method (II) glycyrrhetinic acid (GHeA ; the aglicone of GA) content corresponding to the quantity of GA was measured from the chloroform extract of the hydrolyzed product of licorice aqueous extract. A reverse phase column Hibar Lichrosorb RP-18 (E. Merck) was used as the stationary phase. As the mobile phase MeOH: $H_{2}O$(0.05M-$NaH_{2}PO_{4}$)=58 : 42 solution in Method (I), and MeOH: $H_{2}O $: AcOH=78; 19: 3 solution in Method (II) were suitable, respectively. The value obtained by Method (II) appeared slightly higher than that by Method (I). The effect of some other herbal drugs on the assay of GA quantity in mixed sample was also observed in both above two methods. By Method (I) Cassiae Cortex, Rehmaniae Rhizoma, Paeoniae Radix, and Angelicae Radix gave the subtractive effect on the amount of GA compared with the value from licorice alone. In the case of Method (II) Cassiae Cortex and Rehmaniae Rhizoma appeared to have subtractive effect but Paeoniae Radix and Angelicae Radix scarcely showed any influence. Pachymae Fungus did not affect the GA content at all. It seems that glycyrrhizin in licorice interacts with certain components of other herbal drugs.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.312.1-312.1
• /
• 2007

• Journal of the Korean Statistical Society
• /
• v.16 no.2
• /
• pp.80-91
• /
• 1987

Minimum $L_i$ norm estimation is a robust procedure ins the sense that it leads to an estimator which has greater statistical eficiency than the least squares estimator in the presence of outliers. And the $L_1$ norm estimator has some desirable statistical properties. In this paper a new computational procedure for $L_1$ norm estimation is proposed which combines the idea of reweighted least squares method and the linear programming approach. A modification of the projective transformation method is employed to solve the linear programming problem instead of the simplex method. It is proved that the proposed algorithm terminates in a finite number of iterations.