• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.381-390
• /
• 2018

This study was conducted to examine the growth characteristics of seedlings of several major fruit vegetables and compare them between plants grown with the conventional plug seedling system (Plug) and those grown with the cylindrical paper pot system (CPP). There were no significant differences in shoot growth characteristics, such as plant height, leaf area, dry weight, and fresh weight, between tomato, cucumber, and watermelon plants grown with the CPP and Plug systems. The total root lengths of tomato and cucumber plants grown with Plug were longer than those grown with CPP at the beginning of seedling growth, and the total root lengths of watermelon grown with Plug were longer than those grown with CPP throughout the whole seedling period. The length of root that separated five steps according to the diameter of the root of tomato did not differ between CPP and Plug, but those of cucumber and watermelon were 20-251% longer with Plug than with CPP for all kinds of roots. The fresh weight of Plug-grown tomato roots was about 30% heavier than that of CPP-grown tomato during the seedling period, but the difference decreased as growth progressed. Finally, there was no difference between plants before and after transplanting. The fresh weights of the Plug-grown plants were about 20-30% heavier than those of CPP-grown ones in terms of the whole seedling. After transplanting to the Wagner pot, the shoot growth of Plug-grown watermelon plants in terms of dry weight was low until 7 days had passed. However, this tendency was reversed from 8 days after transplantation onward. In conclusion, there were no significance differences in the growth of shoots between plants grown with the CPP and Plug systems. However, root development was better with Plug than with CPP.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2583-2588
• /
• 2008

In the present experimental study, the regime limit and pressure drop of dry-plug flow (dry wall condition at the gas portions of plug flow) in round mini-channels has been investigated. The air-water mixture was flowed through the round mini-channels made of Teflon, where the tube diameters ranged from 1.26 to 2.06 mm. For the present experimental range, with decreasing of the tube diameter, the transition between the plug and slug flows (wet and dry) happened at the higher gas superficial velocity region, which were in good agreement with the previous flow pattern maps tested. On the other hand, the transition between the wet- and dry-plug flows was little affected by the change of the tube diameter. In the pressure drop of dry-plug flows, among the correlations tested, the Lee and Lee's (2008) correlation best fitted the measured pressure drop data within the mean deviation of 10% for the present experimental range.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.187-201
• /
• 1996

The purpose of this study was to evaluate the sealing ability of a calcium hydroxide plug treated with a bonding agent. Ninety extracted human anterior teeth and premolars with single canal were used in this study. Crowns were removed. the canal's were instrumented. and the roots were randomly divided into three groups of 30 each. In control group. a single apical seat was prepared with #60 K file 1mm short of the apex and the root canal was obturated with Gutta-percha and Sealapex by the lateral condensation method. In experimental group 1 and group 2. to prepare an apical isthmus of 1mm in length. the first apical seat was prepared with a #45 K file 1mm short of the anatomical apex and with a #60 K file 2mm short for the second apical seat. Dry calcium hydroxide powders were packed in the apical isthmus with a hand plugger and #60 K file and then. the root canal was obturated with Gutta-percha and Seal apex by the lateral condensation method. In experimental group 2. following an application of the bonding agent to the plug. the root canal was obturated in the same way. The teeth of each group were immersed in a 2% methylene blue dye solution. for 1, 2, and 4 weeks. The distance from the tip of the cone to the deepest penetration was measured using the Tool maker's microscope. The results were as follows : 1. The teeth having the calcium hydroxide plug treated with the dentin bonding agent (experimental group 2) showed the lowest leakage with 1.4705mm and the control group without apical plug(no apical isthmus) showed the highest leakage with 3.1735mm. 2. The control group without apical plug showed higher leakage than experimental group 1 having the calcium hydroxide plug treated without the dentin bonding agent(p>0.05). 3. The control group without apical plug and experimental group 1, having the calcium hydroxide plug treated without the dentin bonding agent. showed higher leakage than experimental group 2. having the calcium hydroxide plug treated with the dentin bonding agent(p<0.001). 4. The immersion time had no significant effect on the degree of leakage. In conclusion, the results showed that the calcium hydroxide plug treated with the dentin bonding agent could decrease the microleakage from the root apex effectively.

• Journal of Welding and Joining
• /
• v.17 no.2
• /
• pp.29-35
• /
• 1999

This study was intended to use for the fatigue test in real structures and offer basic data for optimum welding structure design. To this purpose, we obserded the effect of the size and distance of plug welding hole on the static strength and fatigue life of welding structure under the shear/bending load for the improvement of fatigue life of plug welding joint between S/MBR and C/MBR in the lower structure of large bus. The result below is shown through this study. 1) Static and fatigue strength are strongly influenced by the direction of plug weld hole distributed. 2) Distances and diameters of the distributed holes are little dependent on the static strengths 3) In case of the directions of the distributed plug weld holes are vertical to the loading pin, fatigue life is dependent on distance of the distributed hole. 4) In case of the directions of the distributed plug weld holes are parallel to the loading pin, fatigue life is dependent on distance of the hole diameter.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.2
• /
• pp.121-124
• /
• 2001

Potato (Solanum tuberosum L.) tubers of 10, 20, 30, 40, and 50 g were planted in plug trays with vermiculite-based root medium on 10 August 2000 and grown for 15 days in a glasshouse to determine the effects of mini-tuber size on plug seedling growth and field performance of plug seedlings. For a control, common potato tubers weighing 50 g were also planted. As size of seed tubers planted increased from 10 to 50 g, seedling height decreased from 24.6 to 20.0cm while shoot number per seedling increased from 2.0 to 3.5, main stem diameter from 4.3 to 6.1mm, and fresh weight of root + top from 9.3 to 19.4 g/seedling. At 90 days after transplanting plug seedlings, the total number of tubers per plant increased from 3.62 to 4.72, average tuber weight from 62.9 to 72.8g, and total tuber yield 20.5 to 23.6 t/ha with increase in seed tuber size. Plug seedlings raised from 50g tubers produced 22% more tubers per plant and had 21 % higher＞80g tuber yield than the directly planted potatoes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.10
• /
• pp.1163-1171
• /
• 2004

The variation of spark plug location have one of the effects on combustion characteristics. Several parameters of the effect on combustion characteristics are shape of combustion chamber, the spark plug position, turbulence flow and so on. This paper presents an experimental study according to variation of spark plug protrusion and PDA valve which have effects on characteristics of combustion and emission in single cylinder gasoline engine. Also, this paper emphasized that combustion stabilization was making by way of the reinforcement of the turbulent flow with the PDA valve. A feasibility and necessity of combustion pressure based cylinder spark timing control according to spark plug protrusion has been examined. So, this was obtained COV$\_$imep/ and the mass fraction burned(MFB) and the specific fuel consumption(sfc). Using the results of the test, the effects of the variable spark plug location and PDA valve can be improved fuel consumption and be available for the combustion stability.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.12 no.1
• /
• pp.39-45
• /
• 2010

This study was carried out to investigate the growth and rooting of cutting time, media and plug cell size in Dianthus spp and Coreopsis spp. A rooting rate was the low in lated rooting time rooting rate was the over 90% in 20th May and 20th August otherwise was the 82% and 87% in 20th September. Media of rooting was the over the 90% in all treatment media and sand media was low. Number of rooting was the best in peatmoss(1)+perlite(1) media. The size of plug cell was the 98% in 162 plug cell in Coreopsis spp. The 162-200 plug cell size was the 95.8-96% in Dianthus spp.

• Communications for Statistical Applications and Methods
• /
• v.31 no.3
• /
• pp.337-347
• /
• 2024

Kernel density estimation is a prevalent technique employed for nonparametric density estimation, enabling direct estimation from the data itself. This estimation involves two crucial elements: selection of the kernel function and the determination of the appropriate bandwidth. The selection of the bandwidth plays an important role in kernel density estimation, which has been developed over the past decade. A range of methods is available for selecting the bandwidth, including the plug-in bandwidth. In this article, the proposed plug-in bandwidth is introduced, which leverages shifted Chebyshev series-based approximation to determine the optimal bandwidth. Through a simulation study, the performance of the suggested bandwidth is analyzed to reveal its favorable performance across a wide range of distributions and sample sizes compared to alternative bandwidths. The proposed bandwidth is also applied for kernel density estimation on real dataset. The outcomes obtained from the proposed bandwidth indicate a favorable selection. Hence, this article serves as motivation to explore additional plug-in bandwidths that rely on function approximations utilizing alternative series expansions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.4
• /
• pp.294-297
• /
• 2021

A grid voltage estimation method for modular plug-in active power decoupling (APD) circuits is proposed in this study as direct replacements of electrolytic capacitors. Since modular plug-in APD circuits cannot have additional grid voltage sensors and should be operated independently without information exchange with the front-end converter, it is impossible to obtain the phase information of the grid directly. Therefore, the proposed method uses the second-order harmonic component of the DC-link voltage to estimate the grid voltage necessary to control the APD circuit. By employing the proposed method, the concept of modular plug-in APD circuits can be realized and implemented without direct detection of the grid voltage. The experimental results based on hardware-in-the-loop simulation (HILS) validate the effectiveness of the proposed control method.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1585-1589
• /
• 2007

The HANARO, a 30 MW multi-purpose research reactor in Korea, will be equipped with a neutron guide system, in order to transport cold neutrons from the neutron source to the neutron scattering instruments in the neutron guide hall near the reactor building. The neutron guide system of HANARO consists of the in-pile plug assembly with in-pile guides, the primary shutter with in-shutter guides, the neutron guides in the guide shielding room with dedicated secondary shutters, and the neutron guides connected to the instruments in the neutron guide hall. The functions of the in-pile plug assembly are to shield the reactor environment from a nuclear radiation and to support the neutron guides and maintain them precisely oriented. The primary shutter is a mechanical device to be installed just after the in-pile plug assembly, which stops neutron flux on demand. This paper describes the mechanical design of the in-pile plug assembly and the primary shutter for the neutron guide system at HANARO. The design of the guide shielding assembly for the primary shutter and the neutron guides is also presented.