• Journal of the Korean Ceramic Society
• /
• v.29 no.12
• /
• pp.919-925
• /
• 1992

Continuous synthesis process for monodispersed zirconia powders with ultrasonic wave mixing was developed. Reactant solutions were flowed through a T-tube with small diameter and then mixed in a microscale with ultrasonification. Reaction and aging were followed during the mixed solution of reactants is in plug flowing through a narrow long teflon tubing. Zr(n-OC4H9)4 in ethanol and H2O in ethanol were used as reactants. From this process monodispersed, spherical, non-agglomerated, singlet hydrated zirconia powders with 0.6 $\mu\textrm{m}$ average size were obtained. Geometrical standard deviation of the particle size distribution was less than 1.2 with ultrasonic mixing, and the geometrical standard deviation was not affected by the flow rate of the reactants.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.191-198
• /
• 1998

In this study, the effects of water vapor in inlet air, spark advance and fuel type in the spark ignition engine were investigated through the experiments of combustion and flame arriving pattern analysis using ionization probe. The results of flame propagation experiment using ionization probe show that the flame which ignited from spark plug located at the center of the combustion chamber propagated faster in exhaust side than in intake side due to the mixture flow motion inducted into combustion chamber from intake tumble port at all conditions. And as the partial vapor pressure increased, the flame propagation became slower in all direction. Especially effects were greater for intake side than the exhaust side.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.154-154
• /
• 2003

고품질의 합금강 생산 시 가장 큰 영향을 미치는 레이들정련은 고온 하에서 반응 및 유동이 일어나므로 실제조업 직접관찰이나 측정이 대단히 어려울 뿐만 아니라, 수많은 조업인자와 상호 결합되어 있기 때문에 최적의 작업조건을 찾는데 많은 시행착오를 겪는다. 본 실험에서는 직접 조업하는 조건과 가장 부합하는 수모델 실험 및 Flow 3D를 이용한 수치해석 방법으로 비용의 절감 및 실험에 대한 위험부담 등 시행착오를 최소화하면서 최적의 작업조건을 도출하여 고품질 합금강 생산성과 process 효율성의 극대화를 찾을 수 있다. 따라서 본 연구에서는 슬래그의 물성(슬래그 양, 점도)을 고려한 gas bubbling 조건(가스유량, 유체높이, ladle 크기, 단공nozzle, porous plug 위치)에 따른 용강의 교반특성 및 용강의 슬래그 혼입 거동을 조사함으로써 고청정 용강 제조를 위한 최적 gas bubbling 조건을 설정하기 위한 수모델 실험과 수치해석 연구를 실시하였다. 수모델 실험을 통한 기포형성 거동과 용강의 교반특성에 대한 현상론적 연구와 병행하여, 유동장 측면에서 이상유동을 가정한 수치해석을 통해 실제 용강 래들 내에서의 거동을 정량화 하고자 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.18-26
• /
• 2001

This paper is the third of 3 companion papers which investigate axial stratification process. In-cylinder fuel behavior has been investigated in the port injected SI engine by visualizing for the purpose of understanding stratification. Planar laser light sheet from an Nd:YAG laser has been illuminated through the transparent quartz cylinder of the single cylinder optical engine and the Mie scattered light has been captured through the quartz window in the piston head with an ICCD camera. Fuel has been replaced with an air-ethanol mixture to utilize atomized fuel spray for the visualization purposes. This results have been compared with steady flow concentration measurement. In high swirl port, the most fuel remains at combustion chamber and upper cylinder region without being affected by injection timing. The macro-distributed state is not changed but the difference of the amount of fuel around the spark plug varies according to injection timing, which determines LML.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.3
• /
• pp.182-187
• /
• 1991

The effects of acrylonitrile and acrylamide on the enzyme action of nitrile hydratase of Brevibacterium sp. CH1 and CH2 strains used for the biotransformations of nitriles were studied. The excessive substrate (acrylonitrile) and product (acrylamide) inhibited the enzyme activity competitively. In comparison with 0.2 mol/l of CH1 strain, the substrate inhibition of CH2 strain began to appear only at a high acrylonitrile concentration of 0.91 mol/l. In a packed bed reactor, dispersed plug flow model was proposed and this model was proved to be valid by the experiment. Also acrylamide productivity decreased sharply when acrylamide concentration in the substrate solution exceeded 20％ (wt/v).

• Journal of Hydrogen and New Energy
• /
• v.19 no.6
• /
• pp.545-551
• /
• 2008

Fe/$Al_2O_3$ composite granules were prepared by combining sol-gel/oil drop method. The shape of granules were mainly determined by composition and concentration of aluminum precursor. The composite granule with the lowest aluminum concentration was synthesized with 0.75M boehmite solution. The prepared granules were tested as a catalyst in the plug-flow reactor for Fischer-Tropsch synthesis. Before the reaction, catalysts were activated by hydrogen reduction and synthesis gas treatment. The activation conditions and aluminum concentration have affected catalytic performance significantly.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.100.3-100
• /
• 2001

This article deals with the development of a mathematical model for the finishing polycarbonate polymerization process using a horizontal rotating disk-ring reactor with counter-current gas sweeping and the performance analysis of the reactor system by using the model. Here we intend to propose a model describing the reactor system consisting of two phases, in which by-product phenol is removed from the polymer of high molecular weight compatible with the products of commercial grades. The vapor phase is represented by a tanks-ln-series model while the polymer melt phase is regarded as a plug flow reactor.

• Journal of Life Science
• /
• v.9 no.2
• /
• pp.40-43
• /
• 1999

In the wastewater treatment experiment by anaerobic-aerobic packed bed unit, it was found that the high and stable removal efficiency of nitrogen could be obtained. The extent of nitrogen removal gradually decreased with the rise of recycle ratio and DO concentration. On the other hand, the extent of phosphorus increased with the increase of DO concentration. COD showed high removal efficiency over the entire range tested. The simulation of T-N behavior was carried out satisfactorily by using the kinetic equations for biofilm and the reactor model which considered the packed bed as a plug flow reactor.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.6
• /
• pp.662-667
• /
• 2013

The effect of fluorine ions, which can be reacted with boron in high-doped BPSG, is investigated on the contact sidewall wiggling profile in semiconductor process. In the semiconductor device, there are many contacts on $p^+/n^+$ source and drain region. However these types of wiggling profile is only observed at the $n^+$ contact region. As a result, we find that the type of plug implantation dopant can affect the sidewall wiggling profile of contact. By optimizing the proper fluorine gas flow rate, both the straight sidewall profile and the desired electrical characteristics can be obtained. In this paper, we propose a fundamental approach to improve the contact sidewall wiggling profile phenomena, which mostly appear in high-doped BPSG on next-generation DRAM products.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.269-272
• /
• 2004

The use of colloidal gas aphron (CGA), as an external oxygen carrier, provides a promising alternative to promote aerobic bioremediation of BTEX in the subsurface environment. CGA is a stable bubble supported by three surfactant layers and can supply oxygen below the soil surface uniformly due to its plug-flow characteristic. Since CGA has a hydrophobic layer that can act as a partitioning medium for hydrophobic contaminants it is known to facilitate desorption of soil-sorbed contaminants. In addition, bioaugmentation and biostimulation are possibly achieved by using CGA when generated from a solution containing BTEX-degrading microorganisms and appropriate nutrients. In this study, we presented the physico-chemical characteristics of CGA generated from a solution composed of microorganisms and nutrients. The applicability of CGA as an in situ aerobic bioremediation technology of BTEX will be further evaluated.