• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.66-73
• /
• 2013

This study was conducted to determine the effects of rice hull cover on seed germination and tray types, soil types, shading conditions for seedling growth of Codonopsis pilosuala. We also examined the feasibility of cultivation of small seedlings transplanted in the Gyeonggi-do area for a month. Under control condition, the seed germination was 8% whereas it dramatically increased to 78% under rice hull cover treatment. Under the different conditions (tray types, soil types, and shading conditions), young seedlings showed the best quality without shading in TKS soil of 50 plug cell tray, with the growth characteristics of plant height (11.9 cm), number of leaves (71), leaf width (3.1 cm), leaf length (2.6 cm), and root length (14.3 cm). Seedling quality was the best without any shading in TKS+perlite, with the physiological characteristics of evaporation (3.9 $mmol{\cdot}m^{-2}s^{-1}$), carbon assimilation (9.1 ${\mu}mol{\cdot}m^{-2}s^{-1}$), and water use efficiency (2.2 ${\mu}mol{\cdot}m^{-2}s^{-1}$). Considering the economical, morphological, physiological and survival rate of the seedlings, it was an ideal method for transplanting seedlings in the field after they have been grown for 30-45 days in TKS and TKS+perlite of 200 plug cell tray in 0% or 30% shaded conditions. As the results of 5 months examination on the possibility to cultivate Codonopsis pilosuala in the Gyeonggi-do area, 88% to 96% of survival rate was observed with normal induced flowers. Therefore, cultivation of Codonopsis pilosuala was possible in the Gyeonggi-do area. While there were symptoms of etiolation and wilting under no shading condition, they did not appear in 30% and 70% shading conditions. Therefore, cultivation of Codonopsis pilosuala is considered to be necessary 30% or 70% shading.

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.329-333
• /
• 2001

The study was performed to investigate the effect of a plug culture method in the early stage of a potato breeding program. The 105, 200 and 288-cell plug trays were used for raising potato seedlings. The % germination in plug trays ranged between 94 and 96%. Percent tuberization measured at 50 and 60, and 70 days after sowing was the greatest in 105-cell and 200-cell trays, respectively. However, tuberization was most delayed in 288-cell trays. Thus, it is considered that 105-cell tray is the most effective for the selection of early maturing plants. Plant maturity was determined by the morphological characteristics at the seedling stage of stolons cultured in plug trays. Most of seedlings with shorter stolons at seedling stage (1st generation) were the early-maturing, while most of seedlings with longer stolons were the late-maturing at the clonal stage (2nd generation). These results mean that the plant maturity in the early potato breeding program can be effectively grouped by observing the morphological characteristics of stolons after plug culture.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.399-405
• /
• 2020

Recently, it is difficult to produce uniform scions and rootstocks with high quality in a greenhouse due to weather extremes. The closed transplant production system is useful for producing scions and rootstocks with desirable morphological characteristics by environment control regardless of weather outside. In this study, we investigated transpiration rates and growth of cucumber and tomato scions and rootstocks grown under different light intensity conditions for precise irrigation control in a closed transplant production system. Hanging system to measure continuously the weight of plug tray consisting of seedlings and substrate with load-cell was installed in each growing bed. Using this system, we confirmed initial wilting point of cucumber and tomato seedlings, and conducted subirrigation when moisture content of substrate was not below 50%. The irrigation time of cucumber scions and rootstocks were 7 and 6 days after sowing, respectively. In tomato scions and rootstocks grown under PPF (photosynthetic photon flux) 300 μmol·m^-2·s^-1, the irrigation time were 5, 8, 11, and 13 days after sowing. Increasing light intensity increased transpiration rates and differences of transpiration rates by light intensity was higher in tomato seedlings. The growth of cucumber and tomato seedlings was promoted by increasing light intensity, especially, hypocotyl elongation and stem thickening was affected by light intensity. Cumulative transpiration rate of plug tray in cucumber and tomato seedlings was increased by increasing light intensity, and daily transpiration rate per seedling was regressed by 1st-order linear equation with high correlation coefficient. Estimation of transpiration rates by weighing continuously plug tray of vegetable seedlings can be useful to control more accurately irrigation schedule in a closed transplant production system.

• Korean Journal of Plant Resources
• /
• v.26 no.1
• /
• pp.75-83
• /
• 2013

The present study was examined seed germination and growth characteristics of Cynanchum wilfordii under the following conditions such as soaking temperature, concentrations of $GA_3$, trays and soil types, and shading conditions. In seed pre-treatment, germination rate was the highest at 93% when soaked in 100 ppm $GA_3$ at $20^{\circ}C$ and seedling growth was best in 50 plug cell tray. Physiological quality was best in the condition in which seeds were treated with 10 ppm $GA_3$ at $20^{\circ}C$. Taking into consideration the seedling growth, their physiological quality as well as economical aspects, seedlings with plant height (over 10 cm) and root length (over 10 cm) were grown vigorously 30-45 days after the seeds were sown in mid-April in TKS, TKS+perlite and TKS+rice hull of 128 or 200 plug cell tray.

• Weed & Turfgrass Science
• /
• v.2 no.4
• /
• pp.376-380
• /
• 2013

This research was carried out to establish a mass-production method and to develop ornamental Gramineae species as cash crops for famers as three species of ornamental grasses were used for seed treatment and plug production. Germination rates of Arundinella hirta were improved to 52.6% by soaking in 4% NaOCl for 60 min and 49.4% with 4% NaOH for 30 min. Germination rates of Panicum virgatum were 20.3% and 22.4% when treated with 4% NaOCl for 10 min and 2% NaOH for 60min treatment, respectively. Pennisetum alopecuroides showed germination rates higher than 98% with both 4% of NaOCl and NaOH for 60 min. When the same size of trays were used, Pennisetum showed faster plug formation in 21 and 30 days with 162 and 40 cell trays, respectively. Arundinella showed a similar trend with Pannicum in completing plug formation, those took 32, 41, and 44 days with the 162, 72, and 40 cell tray, respectively. Plug production was faster with smaller cells; however, total growing period was longer with larger cells in general.

• Journal of Biosystems Engineering
• /
• v.26 no.5
• /
• pp.415-422
• /
• 2001

A seedling pick-up device for vegetable transplanters was developed and its work performance was evaluated at the laboratory. The pick-up device extracts seedlings from a 200-cell tray of seedlings and transfers them to the place where they are to be transplanted into the soil. The device consists of a path generator, pick-up pins and a pin driver. The path generator is a five-bar mechanism comprised of a fixed link, a driving link, a driven link, a connecting link and a slider. The slider is constrained to move along the driven link and a fixed slot of combined straight-line and circular paths. The connecting link joins the driving link and the slider. When the slider moves along the straight-line path of the slot it takes seedlings out from the cell and transfers them to the transplanting hopper when moving along the circular path. A proto-type of the pick-up device was built and tested under the various operational conditions such as age of seedling, approach direction and penetration depth of pins to the cell, holding method of seedling and extracting velocity. The device extracted 30 seedlings per minute with the maximum success ratio of 97% using the seedlings of 23 days old. Some design details were also discussed and suggested to enhance the performance of the device.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.21-26
• /
• 2011

Differences among cultivars, conditions of nutrient solution, nursing materials, and soilless culture systems were investigated to select suitable cultivar and cultivation methods for stable production of summer spinach in the highlands. The 'Quinto' spinach showed the earliest growth and highest yield. For yield increase of summer spinach, optimal solution pH was 6.0, EC was $2.0dS{\cdot}m^{-1}$, and $NH_4-N$ ratio of nutrient solution was 30 percent Stand rate of spinach in nursing seedlings, at 200-cell-tray filled with mixed nursing soil (peat : perlite = 7 : 3), was higher than those grown in urethane sponge and rock-wool plug. Yield was also 18 to 24 percent higher than those in rock-wool plug and urethane sponge. Plant length and yield of spinach in mixed substrate (peat : perlite = 7 : 3) filled nutrient film technique (MSNFT) system were longer of 18 percent, and higher of 9 percent than those in deep flow technique (DFT) system, respectively. However, changes of root zone temperature, pH and EC showed similar pattern with DFT. Therefore, growing 'Quinto' cultivar at 6.0 of pH, $2.0dS{\cdot}m^{-1}$ of EC, 30 percent of $NH_4-N$ ratio, at 200-cell-tray filled with mixed nursing soil, and MSNFT cultivation system, was the best for production of summer spinach in the highlands.

• Journal of Biosystems Engineering
• /
• v.25 no.6
• /
• pp.463-470
• /
• 2000

For maximum seeding efficiency of a nozzle type seeder, the performance of the nozzle should be considered sufficiently. This study was carried out to investigate the optimum operating conditions of a seeder attached the vacuum nozzle which was modified syringe needle acting on the plug seedling tray and the seed plate. Such operating factors as the hole diameter of the nozzle (d), the distance from the nozzle tip to the bottom plate of seed hopper(D) the absorbing air pressure of the nozzle tip(P) the bounding height of seed from the vibrated bottom plate of seed hopper and the seeding speed were selected based on the weight of a grain of seed(W). The treated materials were pepper seed as the flat type, cucumber seed as the oval type and radish seed as the spherical type. The optimum operating conditions of the experimental seeder were revealed as follows: 1. The height of the seed bounding from the bottom plate of seed hopper and the distance from nozzle tip to bounded seed were 5 mm and 0.5 mm at all seeds. The hole diameter of the nozzle and the absorbing pressure for pepper seed, cucumber seed and radish seed was 0.45 mm, 0.65 mm. 0.65mm and 39.2 kPa, 88.3 kPa, 58.8 kPa, respectively. 2. The absorbing pressure P was represented as P=η.4W/$\pi$d$^2$ where η was 100. The seeding speed using a 128 cell tray was 2.4 cm/s which was same transfer as 2.5 trays per minute. 3. The maximum seeding rate in case of the pepper seed was 97% the cucumber seed was 95% and the radish seed was 100% under the optimum operating conditions of the seeder.

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.275-282
• /
• 2018

Miscanthus species are known as a genus of eco-friendly and low-maintenance cost ornamental grasses. Plug and cutting methods were tested for multi-propagation of most promising ornamental Miscanthus species in greenhouse and field plot. The plug formation period with three different cell sizes with four cultivars (M. sinensis 'Andersson', 'Strictus', 'Gracillimus', 'Variegatus') were evaluated the seedling development stages with two irrigation types of the over-head and the bottom watering in greenhouse and field plot afterward during 2015-2016 season. In seedling plug test, the size of tray cell affected the plug formation. Bottom irrigation resulted positively on plant height, weight, root and tiller development compared with the over-head irrigation. Plug cell size affected the plant growth in the field after transplanting. All of the 3 Miscanthus species showed higher rates of successful propagation at the lower nodes before inflorescence formation (vegetative growth stage). To analyze the survival factors of M. xgiganteus cutting, the cutting time, node part, and culm diameter were tested as independent variables with the binary logistic model. The survival probability was influenced by node part and culm diameter significantly. The third and fifth node parts showed 0.12 (8X higher failure probability) and 0.02 (50X higher failure probability) times less survival probability. It means the survival probability will be increased by using older and lower part of cuttings during a vegetative growth stage before inflorescences of M. xgiganteus.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.313-319
• /
• 2020

This study was conducted to find proper material of brushing stimulation for height suppression of tomato plug seedlings. The tomato seeds were sown in 40-cell plug tray filled with commercial seedling medium and brushing stimulation was started at 18 days after sowing. Acrylic, polypropylene film, and weaving film were used by materials of brushing stimulation and, non-treatment and diniconazole treatment were used as the control. In acrylic treatment, the plant height was the shortest and the stem diameter was the thickest. Leaf growth was the lowest in diniconazole treatment. However, the SPAD value was the greatest in diniconazole treatment. The dwarf rate was the greatest in acrylic treatment. In acrylic treatment, the T/R ratio was the lowest and compactness was the greatest. In conclusion, use of the acrylic as material for brushing stimulation has higher dwarf rate than diniconazole treatment, and has advantages height suppression and seedling quality.