• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.869-874
• /
• 1988

The operational control of the rotary snowplow is considered to improve its working efficiency. The speed of the rotary snowplow is controlled, so that the load to the rotary snowplow is kept constant. As the load can not directly be detected, some items considered for the controlled variable are, for example, the engine revolution, the load pressure and etc. In order to examine these, the working simulation of the rotary snowplow was considered by introducing the experimental equation of the load. The control methods were examined by means of the simple digital control using the personal computer. These control methods were compared with simulations and experiments. Consequently, the working efficiency is improved about 20% than the manual operation.

• 한국전산유체공학회지
• /
• 제9권4호
• /
• pp.41-47
• /
• 2004

The paper presents numerical simulations of laminar vortex-shedding flows past a circular cylinder for Re ≤ 500. The simulations are performed by solving the unsteady 2-D Navier-Stokes equations with a finite volume method using unstructured grid system. The resulting Reynolds number dependence of the Strouhal number and of the drag and lift coefficients is compared with experiments and with previous numerical results, showing good agreement. It is found that, for the truly laminar Reynolds number range the present calculation method described is capable of producing reasonably accurate results for the main practically relevant parameters such as Strouhal number, drag and lift coefficients.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.75-78
• /
• 2005

A numerical investigation has been performed to discuss the radiation-affected steady-laminar natural convection in an enclosure under a large temperature difference. Due to inherent nature of this study, the Boussinesq approximation is no longer valid. Therefore the radiating fluid in an enclosure is treated as a ideal gas. To examine the effects of thermal radiation on thermo-fluid dynamic behaviors in complex geometries, two incomplete partitions are introduced. Based on the results of this study, the dispositions of incomplete partitions with radiatively participating medium are found to incur a distinct difference in fluid-dynamic as well as thermal behavior.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.182-185
• /
• 2005

In this study, the numerical and dynamic simulation on staging problem including forward jet mechanism is conducted. The forward jet plays a vital role in staging, which jets out from aftbody. This staging environment needs full dynamic characteristics study and flow analysis for securing staging safety. Present study performs dynamic simulation of prebody and aftbody with flow analysis using Chimera grid scheme which is usually used for moving simulations. As a result, separation mechanism using forward jet well works in staging for given initial conditions and reverse thrust, chamber pressure variation from experiments. Furthermore, it is found that the technique using forward jets for staging is excellent for securing the separation safety.

• Journal of Biosystems Engineering
• /
• 제23권2호
• /
• pp.187-194
• /
• 1998

This study was carried out to investigate mechanical properties o major part for agricultural machinery in Korea. The results are as follows ; 1. The mechanical Properties for heat resisting steel bars, alumium alloy castings, carbon steel for machine structural use, chromium molybdenum steels, high strength brass castings and carbon tool steels are proper for Korean standard. 2. The mechanical properties fir spring steels used to mould board, share of plow and blade of rotary are not suitable to Korean standard. Ⅰ think that a counterplan for quality rising is necessary such as supply of good quality materials and improvement of new materials in Korean agricultural machinery.

• 한국자동차공학회논문집
• /
• 제23권2호
• /
• pp.239-245
• /
• 2015

In order to control the hybrid power system efficiently, the knowledge for the required load of the system is important. The agricultural tractor performs various farm works such as plow, rotary, and baler. When it performs rotary tillage and baler operation, the generated work load is analyzed. To analyze trend of work load, moving average technique is applied to the measurement data. Optimal control inputs for the two works are obtained from simulation using the dynamic programming. The novel fundamental control strategy for parallel hybrid tractor called Max. SOC is proposed.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 가을 학술발표논문집 Vol.29 No.2 (2)
• /
• pp.478-480
• /
• 2002

영상 분할은 임상에서의 진단과 분석 및 3차원 가시화를 위해 선행되어야 할 필수 과정이다. 의료영상은 영상이 가지는 데이터 자체의 고유한 제약들과 해부학적 변이성 때문에 영상분할에 어려움이 있다. 본 논문에서는 의료영상의 분할을 위해 스네이크의 새로운 외부 힘으로 Gradient Vector Flow(GVF)를 이용한 방법을 제안한다. 제안된 방법은 2차원 의료영상에서 에지 맵(edge map)을 구하고, GVF을 계산하여 스네이크의 경계선과 같이 관심 있는 특징의 에너지 함수가 최소가 되는 GVF 스네이크(snake)를 구한다. 제안된 방법을 초음파영상과 자기공명영상 같은 의료영상의 분할에 적용한 결과 기존의 스네이크와 달리 잡음이나 오목한 부분이 있는 객체들을 성공적으로 분할하였다.

• 한국항해학회지
• /
• 제15권3호
• /
• pp.73-97
• /
• 1991

The analysis and investigation are described for White's[2] equations compared to the equations of Runeburg[3] and Milano[5] for continuous icebreaking mode, Tunik[8-1] and Ghoneim[8-2] for ramming icebreaking mode. Calculation results compare reasonably well with published model-scale and full-scale icebreaker data by Baker[1] and Dick[11]. During continuous and ramming mode operation, using characteristics of an incebreaker, down ward force on ice and standard ice thickness broken are predicted. Additionally draft, trim and extraction difficulty are also predicted. The bow part line of an icebreakin $g^{ply}$ vessel is designed aiming to maximize the ice breaking capabiltiy as following conditions-low bow angle[20 degrees] at designed waterline, small spread angle complement [6 degrees] at designed waterline, small spread angle complement [6 degrees] and high propeller thrust [220tons]. with plow, two reamers and wave type bumper.

• 한국농공학회지
• /
• 제15권1호
• /
• pp.2925-2933
• /
• 1973

For the efficient utilization of farm machines on the inclined uqland, work performance in plowing, harrowing and terracing and critical workable gradients were tested on three farm machines which are 47 ps-farm tractor, 8 ps-power tiller and 5 ps-power tiller. The results of this study are summarized as follows; 1) The steeper the slope of the upland was the more inefficient the work performance of all machines was. 2) The critical workable gradients of the machines were proved as 14 for 47 ps-farm tractor, 12 for 8 ps-power tiller and 10 for 5ps-power tiller. 3) Plowing in the way of turning the furrow slices against the slope in order to build up terraces, the critical workable gradients were 8 for 47 ps-farm tractor and 8 ps-power tiller and 6 for 5 ps-power tiller. 4) Two-way plow is recommended for plowing with farm tractor on inclined upland, and high lug of tire would be good to prevent the slippage, and side valance-weight should be attached to power tiller for preventing its overturning.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.82-89
• /
• 2019

This study is a structural analysis of the major components of the implements for an agricultural tractor. To develop an unpowered high-speed implement of an agricultural tractor, the modeling and analysis of the benchmarking product was calculated using 3D scanning and reverse design technologies. The tractive load was calculated using the powertrain efficiencies and soil-propelling force, which were estimated by analyzing the main frame, disc, frames, and chisel plow for the axial loading condition. The final goal of this research is to establish the design parameters and assembly technology for securing disc harrow structures and durability of life. This information will be used to analyze the new model design for domestic consumption.