• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.531-542
• /
• 2017

The structural safety of small craft, such as steel ships and FRP ships, can be estimated using the measurement test of the hull plate thickness or the longitudinal bending strength test. A polyethylene boat is made using inexpensive HDPE and can be mass produced. The structural safety of a polyethylene boat cannot be guaranteed because a polyethylene boat hull is notspecified in the KR technical rules. The inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 propose the structural strength required for small crafts as the drop test height. Therefore, in this study, the drop test of a polyethylene boat hull was carried out based on the inspection procedure of a sailing yacht and pleasure boat and the drop test method of ISO standard 12215-5. The drop load was acquired by the drop acceleration ofa boat hull. Structural analysis and safety of a polyethylene boat were performed by the drop load and allowable stress criteria. The calculation results of the hull plate thickness by structural design specification of ISO standard 12215-5 showed that polyethylene boat hull was more than two times thicker than a steel ship hull and the boat hull determined by the inspection procedure of sailing yacht and pleasure boat and drop test method of ISO standard 12215-5 was more than 1.2 times thicker than the boat hull determined by structural design specification of ISO standard 12215-5. Therefore, inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 was much more conservative than the structural design specification of ISO standard 12215-5 and could be used as the structural design method of a polyethylene boat.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.275-278
• /
• 2009

This study is intended to apply universal design concept and guideline to the boarding facilities of pleasure boat. In order to fulfill the purpose of the study a site survey at Suyoung Marina has been carried out. Out of the survey some problems are picked up for each part of access and pier facility, boarding platform and inside door. Practical measures for improving the situation are suggested.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.6 s.144
• /
• pp.710-716
• /
• 2005

The objective of the present study is to design a hull form of a 9.77 ton class trimaran for use as a Pleasure boat around the bay of Gyounggy. The boat will be made of fiber reinforced plastics and equipped with a 650 hp diesel engine with a conventional water jet propulsion system and the maximum speed be 25 knots after fully loaded. In the present study, the optimal configuration such as relative location of outriggers of the 9.77 ton class trimaran is selected and the resistance characteristics are carefully studied through a series of model tests. The general arrangement of the boat are also considered in the final decision of the hull form.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.32
• /
• pp.30-45
• /
• 2012

본 연구는 국내 보급을 위한 해양레저용 모터보트 개발을 목표로 하여 모터보트 개발 전과정에 대한 기반기술을 구축하고자 한다. 이번 호에서는 해양레저에 대한 국내외현황 및 보급을 위한 국내 선호도 조사결과, 개발선의 주요제원의 선정, 선형설계, 모형시험 및 특허출원에 대한 부분에 대해 기술하였다.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.33
• /
• pp.2-11
• /
• 2012

본 연구는 국내 보급을 위한 해양레저용 모터보트 개발을 목표로 하여 모터보트 설계부터 건조까지 개발 전과정에 대한 기반기술을 구축하고자 한다. 이번 호에서는 지난 호에 이어 일반배치도 및 구조도면 작성부분과 선박의 구매나 판매시 고객의 의견을 바로 가시화하여 확인할 수 있어 활용도가 높을 것으로 예상이 되는 맞춤형시스템 개발에 대한 부분에 대해 기술하고자 한다.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.34
• /
• pp.33-45
• /
• 2013

본 연구는 국내 보급을 위한 해양레저용 모터보트 개발을 목표로 하여 모터보트 설계부터 건조까지 개발 전 과정에 관한 기반기술을 구축하고자 한다. 이번 호에서는 지난 호에 이어 보급형 모터보트 시제선의 건조작업 및 건조 영상매뉴얼 개발, 시제선을 홍보하는데 활용될 워킹뷰 시스템 개발 부분에 관해 기술하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4726-4732
• /
• 2013

The Domestic boat has been manufactured by hull form of typical foreign boat. In this study, design environment for polyethylene boat is analysed to create new hull form of the boat and design elements are extracted from existing boats and consumer preferences. Key elements in polyethylene boat design are three words "semi-classic, urban and sporty". Hull resistance and engine power for new developed boat can be expected by Orca 3D program. This result indicates that engine power of the boat is much less than that of commercial boat.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.283-289
• /
• 2011

As leisure boats become large-scaled and high value-added, their design requirements gradually get more complicated and accordingly their manufacturing processes get more complicated than those of existing ones. Leisure boat builders overseas make efforts to overcome this circumstance by establishing a 3-D model-based design system which is based on the concept of PLM. On the other hand, Korean shipbuilders still remain in the development process of traditional leisure boats which are mainly based on 2-D drawings. There have been some efforts made to have the 3-D model-based design system; however, they belong to a very early stage. This study carried out initial research to apply DMU technology to the development process of leisure boats. It established the design process based on a DMU model and proved its usefulness through a case study on the design of 40-ft class aluminum leisure boats.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.4
• /
• pp.361-373
• /
• 2020

In Jeju, in order to efficiently manage and coexist fishing boats and passenger ships in narrow ports, it is necessary to establish reasonable policies. The survey was conducted on 99 fishing ports, from December 1 to 31, 2018. A site survey was conducted on 30 parties (15 in Jeju City and 15 in Seogwipo City) concerning with the use of fishing ports in Jeju to review the appropriate conditions for selecting fishing ports as control subjects. The survey determined size of pleasure craft mooring within fishing port (20%), size of fishing boat mooring (20%), and accessibility of fishing port (20%) under on-site survey factors as well as willingness to form a consultative group between fishing boat and pleasure craft users (20%). Upon the request of the survey, positive and negative opinions were collected on the establishment of a safety control center in the fish port. Based on the survey results, the factors mentioned above were applied to each and every fishing port within Jeju. The bottom five fishing ports in Jeju with the lowest total factor scores were identified and selected as control subjects for review and study. Of the five fishing ports selected as control subjects amidst the 99 fishing ports in Jeju, Dodu Fishing Port had the lowest score of 22% among the national fishing harbors. Among the local fishing ports, Hwabuk Fishing Port had the lowest score of 18%, followed by Sagae Fishing Port with a score of 22%. Hamdeok Fishing Port had the lowest score of 24% among the fishing port villages, whereas Ojo Fishing Port had the lowest score of 24% among the small fishing ports.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1551-1561
• /
• 2012

Boat or yacht hulls are mainly built using FRP composite materials. FRP boat hull manufacturing has been restricted since 2000 under international regulations on ocean environment safety. FRP composite materials cannot be recycled and require more than 100 years to biodegrade. Therefore, alternatives to FRP have been proposed by many boat builders. Steel, aluminum, and FRP are commonly used as boat hull materials. Their design specifications are proposed as Korean register of shipping. However, the design specifications for inexpensive materials for a small boat have not yet been studied. Small shipbuilders manufacture and sell HDPE canoes or HDPE kayaks. In this study, a hull form was designed based on actual boats. The thickness of an HDPE boat hull was determined based on ISO 12215-5 structural design specifications.