• Structural Engineering and Mechanics
• /
• 제84권6호
• /
• pp.743-765
• /
• 2022

Near-surface excavations may cause the tilting and destruction of the adjacent superstructures in big cities. The stability of a huge excavation and its nearby superstructures was studied in this paper. Some test instruments monitored the deformation and loads at the designed location. Then the numerical models of the excavation were made in FLAC3D (a three-dimensional finite difference code) and Plaxis-3D (a three-dimensional finite element code). The effects of different supporting and reinforcement tools such as nails, piles, and shotcretes on the stability and bearing capacity of the foundation were analyzed through different numerical models. The numerically approximated results were compared with the corresponding in-field monitored results and reasonable compatibility was obtained. It was concluded that the displacement in excavation and the settlement of the nearby superstructure increases gradually as the depth of excavation rises. The effects of support and reinforcements were also observed and modeled in this study. The settlement of the structure gradually decreased as the supports were installed. These analyses showed that the pile significantly increased the bearing capacity and decreased the settlement of the superstructure. As a whole, the monitoring and numerical simulation results were in good consistency with one another in this practically important project.

• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.41-48
• /
• 2019

Bending moments in the raft of a pile raft system is affected by pile-pile interaction and pile-raft interaction, amongst other factors. Three-Dimensional finite element program has to be used to evaluate these bending moments. Winkler type analysis is easy to use but it however ignores these interactions. This paper proposes a very simplified and novel method for finding bending moments in raft of a piled raft based on Winkler type where raft is supported on bed of springs considering pile-pile and pile-raft interaction entitled as "Winkler model for piled raft (WMPR)" The pile and raft spring stiffness are based on load share between pile and raft and average pile raft settlement proposed by Randolph (1994). To verify the results of WMPR, raft bending moments are compared with those obtained from PLAXIS 3D software. A total of sixty analysis have Performed varying different parameters. It is found that raft bending moments obtained from WMPR closely match with bending moments obtained from PLAXIS 3D. A comparison of bending moments ignoring any interaction in Winkler model is also made with PLAXIS-3D, which results in large difference of bending moments. Finally, bending moment results from eight different methods are compared with WMPR for a case study. The WMPR, though, a simple method yielded comparable raft bending moments with the most accurate analysis.

• Geomechanics and Engineering
• /
• 제32권4호
• /
• pp.387-396
• /
• 2023

Ground subsidence, which is a current concern that affects piled raft foundations, has occurred at a high rate in Ho Chi Minh City, Viet Nam, due primarily to groundwater pumping for water supply. In this study, the groundwater level (GWL) change affect on a piled raft foundation was investigated based on the three-dimensional finite element method (3D-FEM) using the PLAXIS 3D software. The GWL change due to global groundwater pumping and dewatering were simulated in PLAXIS 3D based on the GWL reduction and consolidation. Settlement and the pile axial force of the piled raft foundation in Ho Chi Minh subsoil were investigated based on the actual design and the proposed optimal case. The actual design used the piled foundation concept, while the optimal case applied a pile spacing of 6D using a piled raft concept to reduce the number of piles, with little increased settlement. The results indicated that the settlement increased with the GWL reduction, caused by groundwater pumping and dewatering. The subsidence started to affect the piled raft foundation 2.5 years after construction for the actual design and after 3.4 years for the optimal case due to global groundwater pumping. The pile's axial force, which was affected by negative skin friction, increased during that time.

• Geomechanics and Engineering
• /
• 제28권3호
• /
• pp.225-237
• /
• 2022

Settlement evaluation is important for shallow tunnels in big cities to estimate the settlement that occurs due to the excavation of twin tunnels. The majority of earlier research on analytical solutions, on the other hand, concentrated on calculating the settlement for a single tunnel. This research introduces a procedure to evaluate the settlement induced by the excavation of twin tunnels (two parallel tunnels). In this study, a series of numerical analysis were performed to validate the analytical solution results. Two geological conditions were considered to derive the settlement depending on each case. The analytical and numerical methods were compared, which involved considering many sections and conducting a parametric study; the results have good agreement. Moreover, a comparison of the 3D flat model and 2D (FEM) with the analytical solution shows that in the fill soil, the maximum settlement values were obtained by the analytical solution. In contrast, the values obtained by the analytical solution in the rock is more conservative than those in the fill. Finally, this method was shown to be appropriate for twin tunnels dug side by side by utilizing finite element analysis 3D and 2D (PLAXIS 3D and PLAXIS 2D) to verify the analytical equations. Eventually, it will be possible to use this approach to predict settlement troughs over twin tunnels.

• Geomechanics and Engineering
• /
• 제29권3호
• /
• pp.269-279
• /
• 2022

In this research, a series of dynamic numerical analysis were carried out for deep underground building structures under the various earthquake conditions. Dynamic numerical analysis model was developed based on the PLAXIS2D and calibrated with centrifuge test data from Kim et al. (2016). The hardening soil model with small strain stiffness (HSSMALL) was adopted for soil constitutive model, and interface elements was employed at the interface between plate and soil elements to simulate dynamic interaction effect. In addition, parametric study was performed for fixed condition and embedded depth. Finally, the dynamic behavior of underground building structure was thoroughly analyzed and evaluated.

• 토지주택연구
• /
• 제3권4호
• /
• pp.451-456
• /
• 2012

최근에 건설되는 고층 건물들은 지하 3층 이상의 깊은 지하층을 갖는 경우가 일반적이며, 이 경우에 국내 지반의 특성상 기반암 깊이가 얕아 지하층하부가 암반에 장착되거나 지중에 위치하는 경우가 많다. 현행 우리나라 내진설계기준의 지진하중은 자유장인 지표면에서의 응답을 바탕으로 하고 있어 말뚝이 매설된 기초 하부 지반에서의 지진하중과 상이하므로 비교 및 검증이 요구된다. 이를 위하여 본 연구에서는 2차원 동적(2D Dynamic) 수치해석 기법을 이용하여 말뚝기초가 기반암에 근입될 때 말뚝 강성효과에 의한 기초저면에서의 지진하중 감소를 확인하였으며 경제적인 내진설계를 수행할 수 있는 가능성을 확인해 보았다. 현행 내진 설계기준에 따른 자유장 지표면 가속도를 설계 지진 하중산정 과정에서 말뚝 강성을 고려한 지진 하중 저감효과를 평가하기 위해 PLAXIS 2D 프로그램을 사용하여 말뚝 개수 4개, 8개, 12개인 세가지 말뚝 배치 경우에 대하여 지중 및 기초상부의 최대 지진 가속도와 동일 깊이의 자유장 최대 지진 가속도를 수치해석을 통하여 비교한 결과, 지반내 매설된 말뚝 기초에 의해 20~25%가량의 지진하중 저감효과가 있는 것을 확인하였다. 그러나 말뚝의 개수 및 콘크리트 기초의 크기는 지진응답 특성에 큰 영향을 미치지 않는 것으로 평가되었다.

• 한국지반공학회논문집
• /
• 제33권12호
• /
• pp.59-73
• /
• 2017

3차원 유한요소 프로그램(PLAXIS 3D)를 이용한 수치해석을 통하여 동적표면하중 하에서지반-말뚝 구조물의 상호작용을 평가하였다. 수치해석에 의한 진동대 실험 형태의 하중조건 및 지반시스템에 대한 동적 p-y곡선을 산정하고 이를 통하여 말뚝-지반의 조건, 말뚝의 선단부 조건, 재하조건 등을 고려하여 매개변수 연구를 하였다. 그 결과 주파수 1.4Hz 입력 진동수가 모형 말뚝-지반 시스템의 고유진동수 1.4Hz와 거의 일치하여 공진 현상이 발생하여서 다른 진동수의 결과와 비교시 다른 p, y 값을 보이고 있다. P-y 곡선에서 이를 대표할 수 있는 경향선을 나타내는 3차 다항함수로 표현하여 결과를 정리하였다. 특히 단독 말뚝의 경우 지배적인 곡선의 형태가 수학적인 증명을 통해 타원(ellipse)임을 밝혀냈다. P-y곡선의형태가 타원인 경우는 타원 방정식을 직접 지반-구조물의 동적설계나 해석에 이용하는 것이 바람직하다고 판단된다.

• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.455-466
• /
• 2020

This paper presents analysis of the interaction between tunnel and Qanat with a particular interest for the optimization of Qanat shape using the discrete element code, PFC2D, and the results will be compared with the FEM results of PLAXIS2D. For these concerns, using software PFC2D based on Discrete Element Method (DEM), a model with dimension of 100m ^⁎ 100 m was prepared. A circular tunnel with dimension of 9 m was situated 20 m below the ground surface. Also one Qanat was situated perpendicularly above the tunnel roof. Distance between Qanat center and ground surface was 8 m. Five different shapes for Qanat were selected i.e., square, semi-circular, vertical ellipse, circular and horizontal ellipse. Confining pressure of 5 MPa was applied to the model. The vertical displacement of balls situated in ground surface was picked up to measure the ground subsidence. Also two measuring circles were situated at the tunnel roof and at the Qanat roof to check the vertical displacements. The properties of the alluvial soil of Tehran city are: γ_dry=19 (KN/㎥), E= 750 (kg/㎠), ν=0.35, c=0.3(kg/㎠), φ=34°. In order to validate the DEM results, a comparison between the numerical results (obtained in this study) and analytical and field monitoring have been done. The PFC2D results are compared with the FEM results. The results shows that when Qanat has rectangular shape, the tensile stress concentration at the Qanat corners has maximum value while it has minimum value for vertical ellipse shape. The ground subsidence for Qanat rectangular shape has maximum value while it has minimum value for ellipse shape of Qanat. The vertical displacements at the tunnel roof for Qanat rectangular shape has maximum value while it has minimum value for ellipse shape of Qanat. Historical shape of Qante approved the finding of this research.

• 대한토목학회논문집
• /
• 제37권5호
• /
• pp.801-813
• /
• 2017

경사고임대의 지지블록에서 발휘되는 수동토압은 지반종류에 따라 발휘되는 토압이 다르다. 영구구조물인 옹벽 설계에서는 수동토압의 안전율을 고려하도록 하고 있으나, 가시설에 설치되는 경사고임대 지지블록에 작용하는 토압은 실제 발휘되는 수동측토압보다 과하게 산정되어 불안전측의 설계가 되고 있다. 본 연구에서는 3차원 수치해석(PLAXIS)을 이용 토사지반에서 경사고임대 지지블록에 발생되는 수동측토압을 산정하였다. 토사지반으로 연약지반과 풍화토지반이 선택되었다. 수치해석결과 각 지반에서 지지블록의 수평변위와 수동측토압 관계 곡선이 산정되었으며 이 곡선상의 항복점이 설계에 적용할 경사고임대 지지체에서의 저항력으로 연약지반에서는 Rankine 수동토압의 약 55.5%, 풍화토지반에서는 약 66%를 보는 것이 안정성 측면에서 바람직한 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제17권1호
• /
• pp.11-18
• /
• 2019

The formulas offered so far on the settlement of raft footings provide only a rough estimate of the actual settlement. One of the best ways to make an accurate estimation is to conduct 3-dimensional finite element analyses. However, the required procedure for these analyses is comparatively cumbersome and expensive and needs a bit more expertise. In order to address this issue, in this study, a raft footing settlement formula was developed based on ninety finite element model configurations. The formula was derived using multi-parameter exponential regression analyses. The settlement formula incorporates the dimensions and the elastic modulus of a rectangular raft, vertical uniform pressure and soil moduli and Poisson's ratios up to 5 layers. In addition to this, an equation was offered for the estimation of average deflection of the raft. The proposed formula was checked against 3 well-documented case studies. The formula that is derived from 3D finite element analyses is useful in optimising the raft properties.