• 제목/요약/키워드: Platinum nano particle

검색결과 14건 처리시간 0.024초

Hydrogen evolution reaction (HER) properties of pulse laser irradiated platinum catalysts with tailored size

  • Jeonghun Lee;Hyunsung Jung
    • 한국표면공학회지
    • /
    • 제57권4호
    • /
    • pp.331-337
    • /
    • 2024
  • Platinum has been utilized as an excellent electrocatalyst with low overpotential for the hydrogen evolution reaction (HER) in water splitting, despite of its high cost. In this study, platinum particles were produced using pulsed laser technology as a HER catalyst for water splitting. The colloidal platinum particles were synthesized by nanosecond pulsed laser irradiation (PLI) without reducing agents, not traditional polyol processes including reducing agents. The crystal structure, shape and size of the synthesized platinum particles as a function of pulsed laser irradiation time were investigated by XRD and SEM analysis. Additionally, the electrochemical properties for the HER in water splitting of the irradiation time-dependent platinum electrocatalysts were studied with the analysis of overpotentials in linear sweep voltammetry and Tafel slope.

금속 염을 이용한 백금 나노입자의 형상제어 (Shape Control of Platinum Nanoparticles Using a Metal Salt)

  • 곽성열;이진호;김진우;정택균;김영도
    • 한국분말재료학회지
    • /
    • 제19권6호
    • /
    • pp.393-397
    • /
    • 2012
  • $AgNO_3$ has the characteristic is controlling the inhibition or promotion of particle growth by adsorbing onto specific facets of platinum nanoparticles. Therefore, in this study, $AgNO_3$ was added to control the shape of platinum nanoparticles during the liquid phase reduction process. Consequently, platinum cubes were synthesized when $AgNO_3$ of 1.1 mol% (with respect to the Pt concentration) was added into the solution. Platinum octahedrons were synthesized when 32 mol% (with respect to the Pt concentration) was added into the solution. These results demonstrate that the metal salt $AgNO_3$, effectively controlled the relative growth rates of each facet of Pt nano particles.

폴리올법으로 제조된 Pt/C 촉매의 연료전지 적용을 위한 나노 입자 크기제어 (Nano particle size control of Pt/C catalysts manufactured by the polyol process for fuel cell application)

  • 허준;윤혁준;최지훈;문채린;최순목
    • 한국표면공학회지
    • /
    • 제56권6호
    • /
    • pp.437-442
    • /
    • 2023
  • This research aims to enhance the efficiency of Pt/C catalysts due to the limited availability and high cost of platinum in contemporary fuel cell catalysts. Nano-sized platinum particles were distributed onto a carbon-based support via the polyol process, utilizing the metal precursor H2PtCl6·6H2O. Key parameters such as pH, temperature, and RPM were carefully regulated. The findings revealed variations in the particle size, distribution, and dispersion of nano-sized Pt particles, influenced by temperature and pH. Following sodium hydroxide treatment, heat treatment procedures were systematically executed at diverse temperatures, specifically 120, 140, and 160 ℃. Notably, the thermal treatment at 140 ℃ facilitated the production of Pt/C catalysts characterized by the smallest platinum particle size, measuring at 1.49 nm. Comparative evaluations between the commercially available Pt/C catalysts and those synthesized in this study were meticulously conducted through cyclic voltammetry, X-ray diffraction (XRD), and field-emission scanning electron microscopy-energy dispersive X-ray spectroscopy (FE-SEM EDS) methodologies. The catalyst synthesized at 160 ℃ demonstrated superior electrochemical performance; however, it is imperative to underscore the necessity for further optimization studies to refine its efficacy.

액상환원공정을 이용한 백금 나노 입자의 합성 (Synthesis of Platinum Nanoparticles by Liquid Phase Reduction)

  • 이진호;김세훈;김진우;이민하;김영도
    • 한국분말재료학회지
    • /
    • 제19권1호
    • /
    • pp.60-66
    • /
    • 2012
  • In this study, Platinum(Pt) nanoparticles were synthesized by using polyol process which is one of the liquid phase reduction methods. Dihydrogen hexachloroplatinate (IV) hexahydrate $(H_2PtCl_6{\cdot}6H_2O)$, as a precursor, was dissolved in ethylene glycol and silver nitrate ($AgNO_3$) was added as metal salt for shape control of Pt particle. Also, polyvinylpyrrolidone (PVP), as capping agent, was added to reduce the size of particle and to separate the particles. The size of Pt nanoparticles was evaluated particle size analyzer (PSA). The size and morphology of Pt nanoparticles were observed by transmission electron microscopy (TEM) and high resolution TEM (HRTEM). Synthesized Pt nanoparticles were studied with varying time and temperature of polyol process. Pt nanoparticles have been successfully synthesized with controlled sizes in the range 5-10 and 20-40 nm with cube and multiple-cube shapes.

폐연료전지(廢燃料電池)스택으로부터 회수(回收)된 백금(白金)의 나노 입자(粒子) 제조(製造) (Platinum Nanoparticles Synthesis using Recovered Platinum from Waste Fuel cell)

  • 김영애;권현지;구정분;곽인섭;신장식
    • 자원리싸이클링
    • /
    • 제20권2호
    • /
    • pp.67-73
    • /
    • 2011
  • 연료전지 폐스택으로부터 백금을 회수하여 재사용하기 위하여 백금의 농도, pH, 환원제, 분산제의 영향을 살펴본 결과 1 mM $H_2PtCl_6$:10 mM $NaBH_4$:8 mM Cl4TABr = 1:0.4:0.4(vol.%), pH4, $50^{\circ}C$, 160 rpm, 10분 조건에서 최적 백금 나노 입자 제조 조건을 확립하였다. 시용 후 폐기된 MEA로부터 산침출을 통해 회수되어진 백금 침출 용액으로부터 백금 모사 용액과 동일한 조건에서 5 nm 이하의 백금 나노 입자를 합성하였다. 백금 모사 용액과 백금 침출 용액으로부터 합성된 백금 나노 입자를 XPS 분석을 통해 백금 이온에서 zero-valent의 백금 나노 입자로 환원되었음을 확인하였다.

Polyol Process를 통한 PEM Fuel Cell용 Pt/C촉매 제조 (Preparation of Pt/C catalyst for PEM fuel cells using polyol process)

  • 오형석;김한성
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 추계학술대회
    • /
    • pp.443-446
    • /
    • 2006
  • Carbon-supported Platinum (Pt) is the potential electro-catalyst material for anodic and cathodic reactions in fuel cell. Catalytic activity of the metal strongly depends on the particle shape, size and distribution of the metal in the porous supportive network. Conventional preparation techniques based on wet impregnation and chemical reduction of the metal precursors often do not provide adequate control of particle size and shape. We have proposed a novel route for preparing nano sized Pt colloidal particles in solution by oxidation of ethylene glycol. These Pt nano particles were deposited on large surface area carbon support. The process of nano Pt colloid formation involves the oxidation of solvent ethylene glycol to mainly glycolic acid and the presence of its anion glycolate depends on the solution pH. In the process of colloidal Pt formation glycolate actsas stabilizer for the Pt colloidal particle and prevents the agglomeration of colloidal Pt particles. These mono disperse Pt particles in carbon support are found uniformly distributed in nearly spherical shape and the size distribution was narrow for both supported and unsupported metals. The average diameter of the Pt nano particle was controlled in the range off to 3 nm by optimizing reaction parameters. Transmission electron microscopy, CV and RRDE experiments were used to compliment the results.

  • PDF

Plasmonic effects and size relation of gold-platinum alloy nanoparticles

  • Jawad, Muhammad;Ali, Shazia;Waseem, Amir;Rabbani, Faiz;Amin, Bilal Ahmad Zafar;Bilal, Muhammad;Shaikh, Ahson J.
    • Advances in nano research
    • /
    • 제7권3호
    • /
    • pp.169-180
    • /
    • 2019
  • Plasmonic effects of gold and platinum alloy nanoparticles (Au-Pt NPs) and their comparison to size was studied. Various factors including ratios of gold and platinum salt, temperature, pH and time of addition of reducing agent were studied for their effect on particle size. The size of gold and platinum alloy nanoparticles increases with increasing concentration of Pt NPs. Temperature dependent synthesis of gold and platinum alloy nanoparticles shows decrease in size at higher temperature while at lower temperature agglomeration occurs. For pH dependent synthesis of Au-Pt nanoparticles, size was found to be increased by increase in pH from 4 to 10. Increasing the time of addition of reducing agent for synthesis of pure and gold-platinum alloy nanoparticles shows gradual increase in size as well as increase in heterogeneity of nanoparticles. The size and elemental analysis of Au-Pt nanoparticles were characterized by UV-Vis spectroscopy, XRD, SEM and EDX techniques.

액상환원법(液相還元法)에 의한 백금(白金) 나노분말(粉末) 제조(製造) (Preparation of Nano-sized Pt Powders by Solution-phase Reduction)

  • 김철주;윤호성;조성욱;손정수
    • 자원리싸이클링
    • /
    • 제16권5호
    • /
    • pp.36-40
    • /
    • 2007
  • 백금은 물리화학적 특성에 기인하여 많은 분야에서 중요한 역할을 하고 있으며, 이러한 분야에서는 아주 미세한 백금의 사용을 요구하고 있다. 그러므로 본 연구에서는 액상에서 환원제를 사용하여 백금염을 환원시킴으로서 나노크기의 백금을 제조하는 방법에 대하여 알아보았다. 수용액상에서 C14TABr과 $H_2[PtCl_6]$ 상호작용은 $[C1_4TA]_2[PtCl_6]$의 유기백금염 화합물을 형성한다. 단분산 나노 백금입자를 얻기 위해서는 $C1_4TABr$$H_2[PtCl_6]$ 농도가 각각 cmc와 0.32 mM 이상이 되어야 한다. $H_2[PtCl_6]$와 C14TABr 농도가 증가함에 따라 백금입자 크기가 증가하였으며, 백금입자의 형태는 C14RABr농도 증가에 따라 제어가 가능하였다.

은 및 백금 나노 입자의 함량에 따른 안 의료용 소재의 물성 변화 (Physical Properties Variation of Ophthalmic Material in Content of Silver and Platinum Nanoparticle)

  • 예기훈;성아영
    • 대한화학회지
    • /
    • 제54권3호
    • /
    • pp.310-316
    • /
    • 2010
  • 항균성을 포함한 나노 입자는 높은 활용성으로 인해 다양한 분야에 적용되고 있다. 본 연구는 HEMA (2-hydroxyethylmethacrylate), NVP (N-vinyl pyrrolidone), MMA (methylmethacrylate)에 나노 은 및 백금을 첨가한 후 농도조건을 다양화 하여 $70^{\circ}C$에서 약 40분, $80^{\circ}C$에서 약 40분 마지막으로 $100^{\circ}C$에서 약 40분 동안의 열처리 공정을 거쳐 공중합 하였다. 사용된 나노 은과 백금 입자의 크기는 각각 10 ~ 20 nm를 나타내었다. 중합 후 생성된 고분자를 사용하여 물리적 특성을 측정한 결과, 함수율 34.29 ~ 39.00%, 굴절률 1.422 ~ 1.430을 나타내었으며, 가시광선 투과율 78.8 ~ 92.5% 그리고 인장강도 값은 0.149 ~ 0.179 Kgf을 나타내었다. 나노 은과 백금 입자를 사용한 안 의료용 렌즈 재료는 콘택트렌즈 적용에 요구되는 기본적인 물성을 만족하였다.

Double Convective Assembly Coatings of FePt Nanoparticles to Prevent Particle Coalescence during Annealing

  • Hwang, Yeon
    • 한국재료학회지
    • /
    • 제21권3호
    • /
    • pp.156-160
    • /
    • 2011
  • FePt nanoparticles suspension was synthesized by reduction of platinum acetylacetonate and decomposition of iron pentacarbonyl in the presence of oleic acid and oleyl amine. FePt nanoparticles were coated on a substrate by convective assembly from the suspension. To prevent the coalescence during the annealing of FePt nanoparticles double convective coatings were tried. First convective coating was for silica particle assembly on a silicon substrate and second one was for FePt nanoparticles on the previously coated silica layers. It was observed by scanning electron microscopy (SEM) that FePt nanoparticles were dispersed on the silica particle surface. After annealing at $700^{\circ}C$ for 30 minutes under nitrogen atmosphere, FePt nanoparticles on silica particles were maintained in a dispersed state with slight increase of particle size. On the contrary, FePt nanoparticles that were directly coated on silicon substrate showed severe particle growth after annealing due to the close-packing of nanoparticles during assembly. The size variation during annealing was also verified by X-ray diffractometer (XRD). It was suggested that pre-coating, which offered solvent flux oppose to the capillary force between FePt nanoparticles, was an effective method to prevent coalescence of nano-sized particles under high temperature annealing.