• Journal of Power System Engineering
• /
• v.5 no.2
• /
• pp.71-78
• /
• 2001

Using sodium hypophosphite as reducing agent, bath composition and plating condition of electroless copper plating on plating rate have been studied. The followings were determined as optimum, bath composition; $CuSO_4\;0.025M,\;NiSO_4\;0.002M,\;NaH_2PO_2\;0.4M$, sodium citrate 0.06M, $H_3BO_3$ 0.6M, thiourea or 2-MBT $0.2mg/{\ell}$, and operation conditions; pH $9{\sim}10$ at bath temperature rage of $60{\sim}70^{\circ}C$. A small amount of nickel ion($Ni^{2+}/Cu^{2+}$=0.002/0.025) to the hypophosphite reduced solution promotes autocatalysis and continuous plating. An additive such as thiourea or 2-MBT of a small amount($0.2mg/{\ell}$) can be used to stabilize the solution without changing plating rate much. The attivation energy between $20^{\circ}C\;and\;70^{\circ}C$ were calculated to be 11.3kcal/mol for deposition weight. Plating reaction had been ceased by the adjustment of pH above 13, temperature higher than $90^{\circ}C\;and\;under\;20^{\circ}C$. Deposited surface became worse in the case of increment of bath temperature above $80^{\circ}C$.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.4
• /
• pp.152-156
• /
• 2009

Electroless plating is influenced by kinds of parameters including concentrations of electrolyte, plating time, temperature and so on. In this study, the Pt thin films were prepared on GaAs substrate by a 2-step electroless plating depending method. The small Pt catalytic particles by using Pt I bath exhibited islands-morphology dispersed throughout the substrate surface at $65^{\circ}C$, as function as a sensitized thin film, and then a thicker Pt film grew upon the sensitized layer by the second Pt II bath. As the growth of Pt film is strongly influenced by the plating time and temperature, the plating time of Pt II bath varied from 5 min to 40 min at $60{\sim}80^{\circ}C$ after Pt I bath at $60{\sim}80^{\circ}C$ for 5 min. It is found that the film grows with the increasing plating time and temperature. The resistivity value of Pt deposited layer was characterized to study the growth mechanism of 2-step plating.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.35-42
• /
• 2017

A number of plating companies have been exposed to the risk of fire due to unexpected temperature increasing of water or other reasons in a plating bath. Since the companies are not able to forecast the unexpected temperature increasing of plating bath and most of raw materials in the bath have low ignition temperature, it is easy to be exposed to the risk of fire. Thus, in previous study, we tried to monitor and notice the dangerous change of temperature of water immediately to prevent the risk of fire from plating process. However, unfortunately previous studies were not able to shut out the fundamental cause of fire since bath temperature sensor can detect air temperature when the level sensor was malfunctioned. In this paper we developed the Teflon heater which contains a built in temperature sensor and improved plating equipment system. Teflon heater is improved using Pt $100{\Omega}$ sensor which can detect until $600^{\circ}C$. When the bath temperature sensor detects over $60^{\circ}C$ or the Teflon heater sensor detects over $240^{\circ}C$ they temporarily shut down the heater to control temperature. Also relay completely shuts down main power when detects instant temperature is detected over 5% of $240^{\circ}C$ by the heater sensor to prevent teflon melting down and fire spreads. Developed plating equipment system can monitor a real time temperature in the teflon tube and bath water. Therefore we think the proposed plating equipment can eliminate the possibility of fire in plating processes fundamentally.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.574-580
• /
• 2022

While in the process of electroless plating of dendrite-shape copper with silver, various silver-coated copper (Ag@Cu) particles were prepared by using both displacement plating and reducing electroless plating. The physicochemical properties of Ag@Cu particles were analyzed by scanning electron microscope- energy-dispersive X-ray spectroscopy (SEM-EDS), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and Brunauer-Emmett-Teller analysis (BET), and it was confirmed that the silver coated by the reducing electroless plating was formed as nano-particles on the copper surface. Ag@Cu particles were compounded with an epoxy resin to prepare a conductive film, and its thermal stability was evaluated. We investigated the effect of the difference between the displacement plating and reducing electroless plating on the initial resistance and thermal stability of conductive films.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.3
• /
• pp.155-163
• /
• 2017

In this study, the effects of the concentration of metal ions and the applied current density in the Sn-Ag plating solutions were examined in regards to the resulting composition and morphology of the solder bumps' surface. Furthermore the effect of any impurities present in the methanesulfonic acid used as a base acid in the Sn-Ag solder plating solution on the stability of plating solution as well as the characteristics of the Sn-Ag alloys films was also explored. As expected, the uniform bump was obtained by means of removing impurities in the plating solution. Consequently the resultant solder bump was obtained in an optimal current density of the range of $1A/dm^2$ to $15A/dm^2$, which has acceptable bump shape and surface roughness with 12inch wafer trial results.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.723-725
• /
• 2001

Ion plating method using plasma is faster as several times than electron beam plating method in plating process. Recently, a variety of techniques for this method are being researched. In this paper to produce sheet plasma with high density for ion plating we designed magnetic circuit of MgO plating device consisting of solenoid coil, rectangular permanent magnet. And, we researched on the effect of those by analyzing magnetic field distribution using FEM.

• Carbon letters
• /
• v.9 no.2
• /
• pp.105-107
• /
• 2008

In this work, we employed an electroless nickel plating on glass fibers in order to enhance the electric conductivity of fibers. And the effects of metal content and plating time on the conductivity of fibers were investigated. From the results, island-like metal clusters were found on the fiber surfaces in initial plating state, and perfect metallic layers were observed after 10 min of plating time. The thickness of metallic layers on fiber surfaces was proportion to plating time, and the electric conductivity showed similar trends. The nickel cluster sizes on fibers decreased with increasing plating time, indicating that surface energetics of the fibers could become more homogeneous and make well-packed metallic layers, resulting in the high conductivity of Ni/glass fibers.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.1-6
• /
• 2016

In this article, the recent developments in electroless plating of copper, electroless bath formulation and effect of plating parameters have been reviewed. Cyanide free electroless baths are now being developed and studied due to the various environmental concerns. Various organic chemicals such as complexing agents, reducing agents, and additives such as poly-alcohols and aromatic ring compounds have been added to copper plating baths for promising results. The effects of various reducing and complexing agents, bath conditions like additives, bath pH, and composition have been summarized. Finally the applications of the electroless plating of copper and latest developments have been overviewed for further guidance in this field.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.234-240
• /
• 2009

In this study, we found that it is important to have a specific management of standards which are the $12{\pm}3{\mu}m$ of plating thickness and $2{\pm}1%$ of tuning. To verify these standards, we checked the plating thickness and density of tuning through marginal valuation of each and checked size of a plating particle, adhesion of solder and condition of reflow after a section chief.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.6
• /
• pp.216-226
• /
• 2005

Pb-Free Technology was born with environmental problems of electronic component, Being connected by big and small project of every country. Also, in each country environment is connected and various standards of IEC, ISO, MIL, JIS, KS, JEDEC, EIAJ etc. All products can divide at solder part and finishing part These can tested each and synthetically divide. This research is reliability evaluation for three kind of ph-free SnCu solder plating solution and it's deposit. First, executed analysis about Pure Sn, SnCu solutions and plating surface by way similar to other plating solution analysis. Next, executed reliability about test method and equipment for reliable analyzer system construction. Next, data comparison and estimation, main estimation test method and item's choice. In this paper the systematic surface analysis and reliability for plating solutions and it's deposit in metal surface finishing processes could be shown.