• Science of Emotion and Sensibility
• /
• v.14 no.2
• /
• pp.221-226
• /
• 2011

Although diverse researches on sensing method of human movement have been performed, there are still many limitations to the existing methods. As a part of supplementing the limitations to the existing motion sensing methods, this study aimed to execute an exploratory examination on a POF-based sleeve-shaped motion sensor for less restrictive sensing of human movement. In this study, a set of POF-based motion sensor, which was embedded in a sleeve-shaped platform was devised, and a set of exploratory experiments was performed on the possibility of sensing of human movement as diverse as in daily life, through this device. The scope of this research was limited to an exploration on the possibility and basic elements of POF-based sleeve-shaped motion sensor, while the influence of sleeve patterns, those of wearer's somatotype, those of sewing method were not studied in this study. When compared to the pre-existing methods, the POF-based motion sensor platformed on sleeve in this study, which was purposively devised to be applied to the motion sensing clothing shows some beneficial characteristics : more sensitive measurement on human motion, low cost, no timely restriction in sensing, no request for gigantic apparatus and space for sensing.

• Science of Emotion and Sensibility
• /
• v.16 no.4
• /
• pp.517-526
• /
• 2013

This paper reports on flexible plastic optical fiber (POF) fabric displays which are used to develop light-emitting clothing from photonic fabric. We first evaluated the luminescence value corresponding to different methods of processing flexible optical fibers, types of reflective fabric structure, and colors of the light. Moreover, we tried to identify the optimum conditions of the flexible POF fabric displays to realize high luminescence value. The processing methods that were compared were the "Pre-etching" method and the "Post-etching" method. On the basis of the reflective structure of the fabric, the fabrics were categorized as the "White fabric" and the "Reflective fabric." Analysis results showed that the effect of the processing method is more dominant than that of the types of reflective fabric structure. Further, the capability of the Post-etching method to increase luminescence value is slightly higher than that of the Pre-etching method. Further, the 'Reflective fabric' is slightly more efficacious as the base fabric to increase the luminescence value, than the White fabric is. Thus, optimum increase in luminance can be realized by employing the Post-etching method and the Reflective fabric as the base fabric.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.175-181
• /
• 2008

We develop a fiber optic acceleration sensor with LED, PD, POF, and a cantilever beam, having film grating at the edge of the beam. Light is transmitted from LED to PD through the film grating. When the cantilever beam moves by external vibration, output light is modulated as sinusoidal signals. The characteristics of output signals are dominated by the spacing of the film grating and also by the size and the elasticity of the beam. Two output signals, having constant initial phase difference, are obtained by two gratings with 90 degree phase difference. Those two signals are used to determine phase angle, which is proportional to the displacement of the beam. Finally, the acceleration is determined from conversion equation between displacement and acceleration. This sensor is designed for monitoring the vibration of large and complex building in the low frequency range of below 7 Hz, and is particularly suitable to measure acceleration in electromagnetic environments.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.262-267
• /
• 2006

For growing need for the multimedia application in the vehicles, the MOST protocol has been focused on. The MOST protocol supports three kinds of communication modes; short control message, asynchronous packets, and reserved synchronous stream data. Because of a variety of transportation, the MOST is suitable for various applications in vehicle environment. In this paper, we implemented embedded system which is MOST-enabled AMS platform and tested the network communication operation through the control port and the synchronous channel of the source port. We implemented the prototype platforms which communicate each other on the MOST's POF network. Moreover we implemented the DivX decoder attached AMS platform and verified the operation by transferring the video stream and the control messages through the MOST network.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.165-174
• /
• 2011

Recent years have witnessed that IT-convergence technology has become the most important issue in the global market. Along with this trend, demand for PSS(i.e., Product-Service Systems) design has been rapidly increased in the smart clothing market. A case of the PSS design research, this study aimed to identify optimum conditions for weaving of POF-based flexible textile display(abbreviated as "PFTD") for mountaineer wear with safe-guard function regarding luminescent properties. Based on the findings regarding the optimum weaving condition of PFTD, several designs of mountaineer wear were suggested in this study. A total of 15 PFTD samples were prepared under various weaving conditions of weave structures and density of POF, and the luminance values of each sample were measured. As the results, the types of PFTD with structures and density of 'satin 3:1', 'satin 2:1', 'twill 3:1' and 'twill 2:1' indicated relatively higher luminescence. And based on the results and recent sports fashion trends, two suited mountaineering wears applying PFTD were illustrated in this study.