• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.204-211
• /
• 2022

In this study, Hollow Concrete Filled FRP Tube Pile(HCFFT Pile) was proposed as a model to utilize the advantages of composite piles and solve the problem of corrosion, which is a disadvantage of CFT piles, and a numerical analysis model was developed to analyze their behavior. The strain compatibility method was applied considering the damage plastic behavior of concrete, the yield plastic behavior of steel, and the elastic behavior of FRP. The flexural strength calculation equation of HCFFT piles was proposed considering the change of the FRP tube section according to the distance from the neutral axis. The flexural strength calculation equation, numerical analysis results, and experimental results were compared and analyzed to verify their adequacy. The results of this study can be used as basic data for the optimal design of various HCFFT piles using FRP.

• Structural Engineering and Mechanics
• /
• v.37 no.4
• /
• pp.385-399
• /
• 2011

The aim of this research is to model the behaviour of recently developed high force to volume (HF2V) passive energy dissipation devices using a simple finite element (FE) model. Thus, the end result will be suitable for use in a standard FE code to enable computationally fast and efficient analysis and design. Two models are developed. First, a detailed axial model that models an experimental setup is created to validate the approach versus experimental results. Second, a computationally and geometrically simpler equivalent rotational hinge element model is presented. Both models are created in ABAQUS, a standard nonlinear FE code. The elastic, plastic and damping properties of the elements used to model the HF2V devices are based on results from a series of quasi-static force-displacement loops and velocity based tests of these HF2V devices. Comparison of the FE model results with the experimental results from a half scale steel beam-column sub-assembly are within 10% error. The rotational model matches the output of the more complex and computationally expensive axial element model. The simpler model will allow computationally efficient non-linear analysis of large structures with many degrees of freedom, while the more complex and physically accurate axial model will allow detailed analysis of joint connection architecture. Their high correlation to experimental results helps better guarantee the fidelity of the results of such investigations.

• Journal of the Korean Society of Costume
• /
• v.65 no.6
• /
• pp.99-111
• /
• 2015

The purpose of this study is to identify the expression methods of uncanny images shown in contemporary fashion through the visual expression methods of plastic arts. The study results are as following. First, there is a concept-forming element of 'The return of Repressed', which is a psychological mechanism for generating uncanny sets to the component of 'repression' and 'return'. 'Repression' herein consisted of 'unconsciousness', 'the other', and 'anxiety', while the return was composed of 'trauma' and 'repetition compulsion'. Second, there are visual expression methods of the uncanny in contemporary art. The subject of 'repressed things' was expressed as grotesque and having a terrible look. 'Fragmented body' was analyzed as 'dismantling' by mutilation, 'combination' placing cut body parts in other places, and 'damage' suffering from an illness or accident. 'Fear of death' was shown as 'anatomy' reminiscent of death and 'iconography of death' meaning return of the dead. 'Post-human' was a surrealistic being such as a monster and mechanized human, and was analyzed as 'gene variation' and 'cyborg'. Third, the methods of visual expression of the uncanny reflected on contemporary fashion was analyzed as 'fragmented body', 'fear of death', and 'post-human'. 'Fragmented body' appeared as the object reminiscent of the fragmented body, 'dismantling and combination of the body', and 'damage of the body' through the distortion of the clothing construction principle. 'Fear of death' visualized the characteristic elements of the subject reminiscent of death as 'iconography of death' and 'symbolic object of death' through the motif. 'Post-human' was the description of the subject beyond the body's function and form, and was shown as 'gene variation' and 'cyborg'.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.12-20
• /
• 2016

Purpose: Pepper prices have risen continuously because of a decrease in cultivation area; therefore, mechanical harvesting systems for peppers should be developed to reduce cost, time, and labor during harvest. In this study, a screw type picking head for a self-propelled pepper harvester was developed, and the optimal working conditions were evaluated considering helix types, winding directions of helix, and rotational speeds of the helix. Methods: The screw type was selected for the picking head after analyzing previous studies, and the device consisted of helices and a feed chain mechanism for conveying pepper branches. A double helix and a triple helix were manufactured, and rotational speeds of 200, 300, and 400 rpm were tested. The device was controlled by a variable speed (VS) motor and an inverter. Both the forward and reverse directions were tested for the winding and rotating directions of the helix. An experiment crop (cultivar: Longgreenmat) was cultivated in a plastic greenhouse. The test results were analyzed using the SAS program with ANOVA to examine the relationship between each factor and the performance of the picking head. Results: The results of the double and triple helix tests in the reverse direction showed gross harvest efficiency levels of 60-95%, mechanical damage rates of 8-20%, and net marketable portion rates of 50-80%. The dividing ratio was highest at a rotational speed of 400 rpm. Gross harvest efficiency was influenced by the types of helix and rotational speed. Net marketable portion was influenced by rotational speed but not influenced by the type of helix. Mechanical damage was not influenced by the type of helix or rotational speed. Conclusions: Best gross harvest efficiency was obtained at a rotational speed of 400 rpm; however, operating the device at that speed resulted in vibration, which should be reduced.

• Korean Journal of Agricultural Science
• /
• v.41 no.2
• /
• pp.75-83
• /
• 2014

Recently, a quick drop of air temperature in plastic film houses by adverse weather conditions leads to the occurrence of low temperature damages to growing crops. Chilling injury, defined as a variety of growth restriction occurring below the optimal temperature, is one of environmental factors strongly affecting crop growth and yield. Low temperature causes the restricted evapotranspiration, reduced mineral uptake (P > K > $NO_3{^-}$), and an increase in electrolyte leakage such as K. Despite being different with plant species, an accumulation of soluble carbohydrates such as glucose, fructose, sucrose and starch under chilling condition is well known. A variety of environmental stresses are known to cause oxidative damage to plants either directly or indirectly by triggering an increased level of production of reactive oxygen species (ROS), and, to combat the oxidative damage, plants have the antioxidant defense systems comprising of enzymes, SOD, POD, CAT, GPX and APX, and non-enzymes, ascorbate, gluthathione, ${\alpha}$-tocopherol, phenolic compounds, carotenoid and flavonoids. The aim of this review is to provide basic information to build chilling-indicators and optimal nutrition management under adverse temperature conditions as broadly considering mineral uptake, carbohydrate metabolism and antioxidative defense system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.777-785
• /
• 2000

The low-cycle fatigue behaviors of cast AI-Si alloy and composite with reinforcement of SIC particles were compared with those of extruded unreinforced matrix alloy and composite in order to investigate the influence of cast and extrusion processes on the cyclic deformation and fatigue life. Generally, both cast and extruded composites including the unreinforced alloy exhibited cyclic hardening behaviour, with more pronounced strain-hardening for the composites with a higher volume fraction of the SiC particles. However, cast composite under a low applied cyclic strain showing no observable plastic strain exhibited cyclic softening behavior due to the cast porosities. The elastic modulus and yield strength of the cast composite were found to be quite comparable to those of the extruded composite, however, the extrusion process considerably improved the ductility and fracture strength of the composite by effectively eliminating the cast porosities. Low-cycle fatigue lives of the cast alloy and composite were shorter than those of the extruded counterparts. Large difference in life between cast and extruded composites was attributed to the higher influence of the cast porosities on the fatigue life of the composite than that of the unreinforced alloy material. A fatigue damage parameter using strain energy density effectively represented the inferior life in the low-cycle regime and superior life in the high-cycle regime for the composite, compared to the unreinforced alloy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.753-760
• /
• 2013

The hydrogen embrittlement of metallic materials is an important issue from the viewpoint of structural integrity. In this regard, the estimation of mechanical properties and fracture toughness under hydrogen conditions provides very important data. This study provides an experimental validation of the approach for simulating the small punch of Inconel 617 using finite element damage analysis, as recently proposed by the authors, and applies an inverse method for the determination of the constitutive tensile behavior of materials. The mechanical properties obtained from the inverse method are compared with those obtained from the tensile test and validated. The mechanical properties and fracture toughness are predicted by using the inverse method and finite element damage analysis.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.4
• /
• pp.74-81
• /
• 2003

The need for insect and mite resistant turfgrass cultivars arose because of problems associated with pesticide use. Representative cultivars and genotypes of 18 warm-season turfgrass [Zoysia japonica Steud., Z. japonica${\times}$Z. metrella hybrids, Z. japonica${\times}$Z. tenuifotia hybrids, Z. matrella (L.) Merr., Cynodon dactylon (L.) Pers., C. dactylon${\times}$C. transvallensis hybrids, Paspalum notatum Flugge., P. vaginatum Swartz., Stenotaphrum secundatum (Walt.) Kuntze, Eremochloa ophiuroides (Munro.) and Buchloe dactyloides (Nutt.) Engelm.] and 20 cool-season turfgrasses [Poa pratensis L., Festuca arundinacea Schreb., F. rubra L., F. rubra var. commutata Gaud., F. ovina var. duriuscula L. Koch. Agrostis tenuis Sibth., A. palustris Huds., and Latium perenne L.] were evaluated for host resistance to feeding by the Spodoptera depravata (Butler) in the laboratory. Two experiments were set up in the laboratory using 8.5cm diameter${\times}$4.0cm deep plastic petri dishes as larvae feeding chambers. In experiment 1, one neonate larvae were place on the grass in each dish and the dishes were arranged with 5 replicates each within an environmental chamber maintained at $25^{\circ}C$ and 15h light: 9h dark Larval survival and larval weights at 7d and 14d, pupal weights, and days to pupation were compared among turfgrasses. In Experiment 2, 4cm sections of all grasses were oriented equidistant from each other in a pattern resembling the spokes of a wheel. Five one neonate larvae were introduced to the center of each dish. Dishes were immediately placed in an environmental chamber held at $25^{\circ}C$, 15h light: 9h dark Larvae were allowed to feed for 24h. Damage was rated from 0(no damage) to 9(completely consumed) were made for eachturfgrass. Resistance as antibiosis (high mortality, slowed growth, and least preference) was identified in Z. japonica${\times}$Z. tenuifolia hybirids ‘Emerald’, Z. japonica${\times}$Z. metrella hybirds ‘Miyako’ and Eremochloa ophiuroides (Munro.). Cool-season turfgrasses tested were susceptible to feeding by Spodoptera depravata (Butler).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.743-751
• /
• 2017

To evaluate the structural integrity of the helicopter radome, we performed bird strike analysis using SPH (Smoothed Particle Hydrodynamics) technique. Since the SPH method is a meshfree method, there is no phenomenon such as mesh tangling and it is suitable to predict the dispersion behavior of debris and debris cloud generated by high-speed impact. In order to observe the scattering direction of fractured bolts, the analysis were performed under the condition that the fracture occurs at the proof load. As a result of bird strike analysis, there is no secondary damage as well as the damage due to, the dispersion behavior of the bird model, and the scattering of the fractured bolts and radome. From the additional analysis that were performed to determine the actual bolt fracture, only plastic deformation is predicted since the maximum stress of the bolt does not exceed the ultimate stress.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.122-129
• /
• 2020

To conduct probabilistic seismic fragility analysis for nuclear power plants, it is very important to define the failure modes and criteria that can represent actual serious accidents. The seismic design criteria for piping systems, however, cannot fully reflect serious accidents because they are based on plastic collapse and cannot express leakage, which is the actual limit state. Therefore, it is necessary to clearly define the limit state for reliable probabilistic seismic fragility analysis. Therefore, in this study, the limit state of the SCH80 3-inch steel pipe elbow, the vulnerable part of piping systems, was defined as leakage, and the in-plane cyclic loading test was conducted. Moreover, an attempt was made to quantify the failure criteria for the steel pipe elbow using the damage index, which was based on the dissipated energy that used the moment-deformation angle relationship.