• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권3호
• /
• pp.411-427
• /
• 1996

The purpose of this study was to observe the healing process and the distribution of fibronectin in injured condylar cartilage and bone by using LM and SEM. In order to perform this study, 40 male rat, weighing about 250g were selected. Under general anesthesia with Pentobarbital sodium, condylar cartilage and neck bone were resected. Then, the wound was irrigated with saline and closed with 5-0 chromic catgut and 4-0 silk by layer-to-layer suturing. The experimental rats were sacrificed by perfusion with 3% paraformaldehyde at 1st and 4th week after operation. The condylar process and surrounding tissues were cut, demineralized, dehydrated and embedded in paraffin. The histological observation of the specimens in LM level was performed after H-E stain and Azan stain. For localization of fibronectin, immunostaining was achieved by the avidin-biotin complex method. To study the change on condylar surface, the specimens were dehydrated, dried, gold coated and were observed with a scanning electron microscope(Hitachi S-2300). The results were as follows ; 1. The cartilage group and the bone group were repaired with epiphyseal cartilage layer on the cut surface as the normal control group. 2. The cut surface was repaired more quickly in the cartilage group than in the bone group. 3. Chondrocytes, diferentiated during healing, were stained strongly to anti-fibronectin, and fibronectin was supposed to participatein chondrocyte differentiation and cartilagenous matrix formation. 4. Fibronectin was distributed more in the new bone than in the old bone, and the osteoblasts surrounding it were also stained strongly. Fibronectin was supposed to participate in new bone matrix formation. 5. Fibronectin is supposed to be associated with the differentiation, migration and adhesion of chondrocyte and osteoblast and to participate in endochondral bone formation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권1호
• /
• pp.68-71
• /
• 2010

Facial nerve schwannomas (FNSs) are usually painless, slow-growing, and without specific symptoms, so that early diagnosis may be difficult. They are particularly liable to being misdiagnosed as parotid gland origin benign tumor before surgery, which can lead to unnecessary parotidectomy or unexpected facial nerve injury. To prevent these complications, it is important that the correct diagnosis is performed at least in intraoperative time. When an adhesion between the mass and the facial nerve is exist or when electrical stimulation of the mass triggers facial movement, FNS is highly suggested diagnosis. In such cases, frozen section analysis should always be performed. In this case, the pre-operative diagnosis from clinical examination and MRI was pleomorphic adenoma. However, intraoperative features led us to suspect that the mass originated from facial nerves, and intraoperative frozen section analysis yielded results consistent with a schwannoma. Based on this intraoperative diagnosis, we carried out a successful conservative treatment with preservation of facial nerve.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.17.1-17.6
• /
• 2016

Background: The aim of this study is to verify the feasibility of using silk fibroin (SF) as a potential membrane for guided bone regeneration (GBR). Methods: Various cellular responses (i.e., cell attachment, viability, and proliferation) of osteoblast-like MG63 cells cultured on an SF membrane were quantified. After culturing on an SF membrane for 1, 5, and 7 days, the attachment and surface morphology of MG63 cells were examined by optical and scanning electron microscopy (SEM), cell viability was determined using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and cell proliferation was quantified using 4',6-diamidino-2-phenylindole (DAPI) fluorescence staining. Results: Optical microscopy revealed that MG63 cells cultured on the SF membrane proliferated over the 7-day observation period. The viability of cells cultured on SF membranes (SF group) and on control surfaces (control group) increased over time (P < 0.05); however, at respective time points, cell viability was not significantly different between the two groups (P > 0.05). In contrast, cell proliferation was significantly higher in the SF membrane group than in the control group at 7 days (P < 0.05). Conclusions: These results suggest that silk fibroin is a biocompatible material that could be used as a suitable alternative barrier membrane for GBR.

• Composites Research
• /
• 제18권1호
• /
• pp.1-9
• /
• 2005

본 논문에서는 복합재료 접합 조인트의 다양한 파손 모드를 고려하여 파손 강도를 예측할 수 있는 방법을 제시하였다. 제시된 방법에서는 접착제의 탄성-완전 소성 재료 모델과 층간분리 파손 식을 이용해 접착제 파손 하중과 복합재료 부재의 층간분리 파손 하중을 동시에 계산하였다. 제시된 방법을 유한요소해석에 도입하여 복합재료 Single-Lap 접합조인트의 파손 예측을 수행하였으며 시험결과와 비교하였다 이를 통해 본 방법이 다양한 접합 방법에 따른 실제적인 파손모드 및 파손 하중을 정확하게 예측할 수 있음을 확인하였다. 또한 접착제의 유효강도(또는 접착 성능) 및 소성거동이 복합재료 접합 조인트의 파손 특성에 미치는 영향을 수치적으로 평가하였다. 이를 통해, 복합재료 접합조인트의 파손 강도는 접착제의 접착 성능과 항상 비례하지 않으며 층간분리 파손과 접착제 파손이 동시에 발생하도록 하는 것이 접합 조인트의 강도를 최대로 향상시킬 수 있음을 보였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권3호
• /
• pp.189-194
• /
• 2013

Osteochondroma is a benign neoplasm, osseous projection surrounded with cartilage, 35.8% of benign osseous tumor, 8.5% of whole osseous tumor and usually arises from the skeletal bone. Osteochondroma is a cartilaginous derivation and relatively uncommon in the craniofacial bone. Osteochondroma of the mandible has slow growth rates which mainly affect women around forty years of age and it can appear through the coronoid process and mandibular condyle, especially in the medial half. Clinical finding associated with osteochondroma of condyle are primarily a palpable, painless temporomandibular area mass with facial asymmetry, malocclusion and midline deviations. Sometimes pain and dysfunction like trismus often accompany the anatomic derangement. Other features include malocclusion with open-bite on the affected side and cross-bite on the contralateral side. In this study, a 45-years old female patient exhibits pain on the left temporo-mandibular joint area and malocclusion due to loss of the molar region with osteochondroma on the top left of her mandibular condyle head. The patient is able to recover gradually from the symptom through treatments on manipulation, stabilization splint, arthroscopic lavage and surgical excision, thus, this is reported as a clinical case.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권2호
• /
• pp.120-130
• /
• 1999

This investigation studied the effect of ovariectomy on the temporomandibular joint (TMJ) of rat. Forty female Sprauge-Dawley strain white rats, each weighing about 200grams were used and divided into two groups. The one group was performed ovariectomy, and the other was performed sham operation. Both group were killed at the intervals of 3 days, 1, 2, 4, and 8 weeks postoperatively, paraffin section were stained with H&E, MT and histomorphometric study of the TMJ was performed in a synchronous manner with an sham operated control group The result were as follows: 1. At 4 weeks after ovariectomy, an adhesion between the inferior surface of the articular disc and the condyle was observed in the central portion. At 8 weeks after ovariectomy, a focal thickening of the bone (osteophyte) was observed in anterior portion and there was a marked decrease in the trabecular bone in the posterior region. 2. The thickness of cartilage zone was increased at 2 weeks postopratively in the central portion, and decreased at 4 weeks postopratively in the posterior portion. The thickness of transitional zone was decreased at 1 week postoperatively in the anterior and proliferating zone was decreased postoperatively. The thickness of articular zone was decreased at 3 days postopratively in the anterior portion, and decreased at 1 week postoperatively in the central portion. From the above finding, we could conclue that estrogen deficiency in rats causes alteration of TMJ in marked early stage.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1635-1641
• /
• 2009

하드코팅에 의해 광변색과 경성의 성질을 갖는 플라스틱 렌즈를 제조하고, 그것들의 광학적 성질과 표면 특성을 평가하였다. 무색 상태의 자외선 스펙트럼과 유색 상태의 가시광선 스펙트럼에서 광변색 효과를 관찰할 수 있었다. 광변색 렌즈의 가시광선 투과율은 무색 상태에서 83.44%(검정)에서 87.15%(청)였으며, 유색 상태에서 71.10%(적)에서 79.98%(황)이었다. 적색 광변색 렌즈는 다른 렌즈에 비해 광학 밀도(${\Delta}$OD)와 색차(${\Delta}$$E^{\ast}_\;{ab}$)가 컸다. 하드코팅을 적용한 광변색 렌즈는 부착성, 내온수성, 내약품성 및 표면 현상이 우수하였으며, 또한 경도와 내마모성은 무코팅 렌즈에 비하여 증가하였다. 따라서 이와 같은 코팅 시스템으로 광변색과 하드코팅 성질과 같은 기능성을 안경렌즈에 부여할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제83권4호
• /
• pp.551-561
• /
• 2022

In this paper, the effect of fire conditions according to ISO 834 standard on the behavior of carbon fibre-reinforced plastic (CFRP) reinforced steel beams coated with gypsum-based mortar has been investigated numerically. To study the efficiency of these beams, 3D coupled temperature-displacement finite element analyzes have been conducted. Mechanical and thermal characteristics of three different parts of composite beams, i.e., steel, CFRP plate, and fireproof coating, were considered as a function of temperature. The interaction between steel and CFRP plate has been simulated employing the adhesion model. The effect of temperature, CFRP plate reinforcement, and the fireproof coating thickness on the deformation of the beams have been analyzed. The results showed that within the first 120 min of fire exposure, increasing the thickness of the fireproof coating from 1 mm to 10 mm reduced the maximum temperature of the outer surface of the steel beam from 380℃ to 270℃. This increase in the thickness of the fireproof layer decreased the rate of growth in the temperature of the steel beam by approximately 30%. Besides excellent thermal resistance and gypsum-based mortar, the studied fireproof coating method could provide better fire resistance for steel structures and thus can be applied to building materials.

• 대한두경부종양학회지
• /
• 제40권1호
• /
• pp.49-53
• /
• 2024

Dermatofibrosarcoma protuberans (DFSP) is a rare soft tissue sarcoma, with an incidence of about 0.8% to 5% per million people per year, accounting for 1% of soft tissue sarcomas. In its early stage, DFSP is typically found as a violet or pinkish macule or patch, and it can develop into a palpable mass with ulceration or bleeding. The standard treatment for DFSP is wide local excision of the tumor with a 2- to 3-cm negative margin, and radiation therapy or chemotherapy can be conducted with surgical treatment. A 35-year-old man had a palpable mass on the left side of his occipital scalp without color change, ulceration, or bleeding, which typically are present in malignancy. A magnetic resonance imaging (MRI) scan showed a 3-cm homogenous enhanced mass without adhesion between the scalp and the mass. Unexpectedly, a biopsy revealed the round mass to be DFSP. A wide excision and rotation of the scalp flap were performed. The patient recovered without any complications and received adjuvant radiotherapy at a dose of 60 Gray (Gy) for six weeks. There was no recurrence through six months of follow-up. Here we report this unique case of DFSP with atypical presentation.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.153-157
• /
• 2001

Interfacial properties and microfailure modes of electrodeposition (ED) treated carbon fiber reinforced polyetherimide (PEI) toughened epoxy composite were investigated using microdroplet test and the measurement of surface wettability. As PEI content increased, Interfacial shear strength (IFSS) increased due to enhanced toughness and plastic deformation of PEI. In the untreated case, IFSS increased with adding PEI content, and IFSS of pure PEI matrix showed the highest. On the other hand, for ED-treated case IFSS increased with PEI content with rather low improvement rate. The work of adhesion between fiber and matrix was not directly proportional to IFSS for both the untreated and ED-treated cases. The matrix toughness might contribute to IFSS more likely than the surface wettability. Interfacial properties of epoxy-PEI composite can be affected efficiently by both the control of matrix toughness and ED treatment.