• 공학교육연구
• /
• 제20권1호
• /
• pp.63-68
• /
• 2017

This research is as a case study of innovative engineering education system through idea factory of korea maritime and ocean university and deals with development of temperature-humidity control device (THCD) for fiber storage on composites in viewpoint of problem solving method. Fiber reinforced plastic (FRP) includes many variables on the composite manufacturing process. Above all, the interfacial adhesion between the fiber and the matrix acts as an important thing that decided mechanical property of the FRP, and also it is profoundly linked to external temperature and relative humidity. High void fraction leads to a result in interlaminar fracture. Therefore, in this research, to establish correlation between fiber reinforcement and fiber storage conditions of temperature and relative humidity we developed a THCD for fiber reinforcement. To evaluate performance of the THCD, glass fiber reinforced plastic (GFRP) is made under the extreme conditions each temperature $34^{\circ}C$, relative humidity 98 % and it can be said that there are the change of mechanical properties according to fiber storage conditions. As a result, the THCD showed sufficient possible application for understanding and applied research of composites field in material engineering. Also, we could check that the necessity of introduction of innovative system such as idea factory existed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.785-789
• /
• 2005

Low temperature deposition of silicon and silicon nitride films by catalytic CVD technique was studied for application to thin film transistors on plastic substrates for flexible AMOLEDs. The substrate temperature initially held at room temperature, and was controlled successfully below $150^{\circ}C$ during the entire deposition process. Amorphous silicon films having good adhesion, good surface morphology and sufficiently low content of atomic hydrogen were obtained and could be successfully crystallized using excimer laser without a prior dehydrogenation step. $SiN_x$ films showed a good refractive index, a high deposition rate, a moderate breakdown field and a dielectric constant. The Cat-CVD silicon and silicon nitride films can be good candidates for fabricating thin films transistors on plastic substrates to drive active-matrix organic light emitting display.

• 대한두개안면성형외과학회지
• /
• 제12권1호
• /
• pp.22-27
• /
• 2011

Purpose: Packing the nose is a common procedure after the closed reduction of a nasal bone fracture to prevent postoperative complications, such as bleeding and adhesion formation as well as to stabilize the framework of the nasal bone. On the other hand, it is difficult for a patient to endure nasal packing because of breathing difficulties, headaches, chest discomfort, insomnia, general weakness and hypoxia. This study examined the availability of a bronchodilator to improve the decreased oxygen saturation and postoperative symptoms on nasal packing. Methods: From February, 2010 to July, 2010, a prospective randomized comparison of the incidence of a range of postoperative signs and symptoms was conducted on 60 patients, who did (n=30) and did not (n=30) undergo bronchodilator infusion (aminophylline 250 mg/10 mL + normal saline 100 mL IV qd) following nasal packing. The postoperative symptoms and oxygen saturation in the two groups were compared. Results: Patients who had infused the bronchodilator showed improved oxygen saturation. Nevertheless, there were no significant differences in the postoperative uncomfortable symptoms (dyspnea, headache, chest discomfort, insomnia, general weakness) between the two groups. Conclusion: A bronchodilator after nasal packing improves oxygen saturation by dilating the airway tract but it cannot reduce the uncomfortable symptoms caused by nasal obstruction. Overall, the bronchodilator is a useful medication for improving the level of oxygen saturation.

• Design & Manufacturing
• /
• 제15권3호
• /
• pp.7-12
• /
• 2021

Plastic injection molds used for rapid heating and cooling must minimize surface damage due to friction and maintain excellent thermal and low electrical conductivity. Accordingly, various surface treatments are being applied. The properties of Al₂O₃ coating and DLC coating were compared to find the optimal surface treatment method. Al₂O₃ coating was deposited by thermal spray method. DLC films were deposited by sputtering process in room temperature and high temperature PECVD (Plasma enhanced chemical vapor deposition) process in 723 K temperature. For the evaluation of physical properties, the electrical and thermal conductivity including surface hardness, adhesion and wear resistance were analyzed. The electrical resistance of the all coated samples was showed insulation properties of 24 MΩ/sq or more. Especially, the friction coefficient of high temp. DLC coating was the lowest at 0.134.

• 농업과학연구
• /
• 제50권3호
• /
• pp.497-505
• /
• 2023

This study evaluated the impact of rain shelters made of plastic film on spring frost damage and fruit quality in Asian pears ('Niitaka') over two years. In 2021, during the coldest spring days (between 0:00 am and 7:00 am), temperatures dropped to -1.20 - 0.43℃ at 120 cm and -1.33 - 0.57℃ at 200 cm above ground level in the control. Conversely, the rain shelter treatment maintained higher temperatures, -0.40 - 0.87℃ at 120 cm and -0.43 - 0.77℃ at 200 cm. Flower damage was significantly lower in the rain-sheltered group, with incidences of 1.3 and 6.9% at 120 and 200 cm, respectively, compared with 18.1 and 22.6% in the control group. Visual observations verified the prevention of frost adhesion on flower organs in the sheltered group, compared with noticeable pistil death and petal browning in the control group. In 2022, when temperatures remained above 0℃, fruitlet stalk length was 5 - 6 mm longer in the sheltered group. The cumulative impact of rain shelters was evident in the improved fruit quality over the two years. This study suggests resilient cultivation strategies in the face of climate change to reduce frost damage, increase productivity, improve fruit quality, and potentially increase incomes of the farmers.

• Archives of Plastic Surgery
• /
• 제32권2호
• /
• pp.143-148
• /
• 2005

Chemotactic migration of bone forming cell, osteoblast, is an important event during bone formation, bone remodeling, and fracture healing. Migration of cells is mediated by adhesion receptors, such as integrins, that link the cell to extracellular matrix ligands, type I collagen, fibronectin, laminin and depend on interaction between integrin and extracellular ligand. Our study was designed to investigate the effect of extracellular matrix like fibronectin, laminin, type I collagen on migration of osteoblast. Migration distance and speed of MC3T3-E1 cell on extracellular matrix-coated glass were measured for 24 hours using 0.01% type I collagen, 0.01% fibronectin, 100 microliter/ml laminin. The migration distance and speed of MC3T3-E1 cell was compared using a video-microscopy system. To determine migration speed, cells were viewed with a 4 phase- contrast lens and video recorded. Images were captured using a color CCD camera and saved in 8-bit full-color mode. The migration distance on 0.01% type I collagen or 0.01% fibronectin was longer than that on $100{\mu}l/ml$ laminin-coated glass. The migration speed on fibronectin-coated glass was 68 micrometer/hour which was fastest. The migration speed on type I collagen-coated glass was similar with that on fibronectin-coated glass. The latter two migration speeds were faster than that on no-coated glass. On the other hand, the average migration speed on laminin-coated glass was 37micrometer/hour and not different from that of control group. In conclusion, the extracelluar matrix ligands such as type I collagen and fibronectin seem to play an important role in cell migration. The type I collagen or fibronectin coated scaffold is more effective for migration of osteoblast in tissue engineering process.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제15권1호
• /
• pp.49-61
• /
• 1993

The transplantation of cartilage, especially auricular cartilage, has assumed a role of importance in the field of plastic and reconstructive surgery. From long years ago, many reports have appeared in the literature describing the experimental and clinical results of the use of cartilage. At present, the evidence for survival of autograft of cartilage is admitted, But, the results for interrelationship between the bone and cartilage grafts with or without perichondrium is not so conclusive. The purpose of this study were observed as to whether autogenous cartilage grafts were fixed by means of tie with 4-0 vicryl and fibrin adhesive on the femur or microscopic findings of union state in 16 rabbits. We sacrified the experimental animals after 1, 2, 4, 6 weeks postoperatively and made the specimens as a routine laboratory procedures and stained with Hematoxylin-Eosin stain, Verhoeff-van Gieson elastic fiber stain, and alcian blue periodic acid-Schiff(AB-PAS) for mucopolysaccharide. Histologic evaluation was performed under microscope. The obtaind results were as follows : 1. Fibrous union was formed between the grafting cartilage and the femur, nor any findings of calcification and formation of new bone. 2. Partial fibrous adhesion was observed in fibrin adhesive groups on 6 weeks postoperatively. 3. Appositional growth has performed more in fibrin adhesive groups than tie groups. 4. There are little difference in both for new copillary proliferation and fibroblast activations. 5. Degenerative changes have apperared more in tie groups than adhesive groups, but not related to the healing periods.

• 한국안광학회지
• /
• 제13권1호
• /
• pp.37-42
• /
• 2008

목적: 플라스틱 렌즈에 착색이 가능한 하드코팅을 실시하고, 이 코팅의 분광 및 표면 특성을 평가하는데 있다. 방법: 코팅은 TEOS, MTMS과 GPTS를 이용한 졸-겔법으로 실시하였다. 코팅의 광학적 그리고 구조적 특성을 주사 전자현미경, 라만분광, 적외선분광 및 자외선/가시광선분광으로 조사하였다. 결과: 이 코팅의 착색성은 일반적인 하드코팅에 비해 2배 높았다. 착색 가능한 하드코팅이 적용된 렌즈의 부착성, 내마모성, 내온수성 및 내약품성은 우수하였다. 연필 경도는 5H였으며, 코팅의 표면은 매끄럽고 균일하였다. 결론: 플라스틱 렌즈에 이 코팅 시스템의 적용으로 착색이 가능한 단단하고 안정된 표면을 부여할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.216-219
• /
• 1995

One of the principal problems encountered in the use of glass fiber reinforced Plastic composites(GFRP) is to establish an active fiber surface to achieve maximum adhesion between resin and fiber surface. In order to develope new process to overcome the disadvantage of chemical agent, we have studied the effect of reactive plasma glass surface treatment on the electrical and mechanical properties of glass fiber reinforced epoxy composites. It is found that the electrical and mechanical characteristics of the composites treated with plasma is improved especially in the dielectric strength by 20% and tensile strength by 15%, whereas the tan $\delta$ is decreased significantly.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.452-455
• /
• 2007

This paper provides an overview on the characteristics of a-SiC:H barrier film deposited for flexible display applications. Key characteristics such as high crack resistance, high thermal/hydro stability, excellent adhesion to the polymer substrate, as well as very low permeance has been demonstrated. The excellence of this barrier film has been shown from competitive analysis compared with other barrier coating materials. Finally, flexible Polymer Light Emitting Diode (PLED) test pixels have been fabricated on the barrier coated plastic substrate, demonstrating the viability of the device with lifetime data.