• 한국표면공학회지
• /
• 제39권3호
• /
• pp.98-104
• /
• 2006

Al-doped ZnO (AZO) films were deposited on the plastic substrate by inductively coupled plasma (ICP) assisted DC magnetron sputtering. The AZO films were produced by sputtering a metallic target (Zn/Al) in a mixture of argon and oxygen gases. AZO films with an electrical resistivity of ${\sim}10^3\;{\Omega}cm$ and an optical transmittance of 80% were obtained even at a low deposition temperature. In-situ process control methods were used to obtain stable deposition conditions in the transition region without any hysteresis effect. The target voltage was controlled either at a constant DC power. It was found that the ratio of the zinc to oxygen emission intensity, I (O 777)/I (Zn 481) decreased with increasing the target voltage in the transition region. The $Ar/O_2$ plasma treatment improve the adhesion strength between the polycarbonate substrate and AZO films.

• Tribology and Lubricants
• /
• 제37권2호
• /
• pp.54-61
• /
• 2021

The effect of the sand blasting before TiAlN coating in the manufacture of WC hard metal alloy tips have been studied. For four different tips, according to the status of processing of the sand blasting and the coating, residual stress measurement by X-ray diffraction and several tests for mechanical properties have been conducted. The results suggest that there was no difference in static mechanical properties, such as hardness, surface roughness and elastic modulus, between two coatings. Furthermore, compressive residual stress was generated equally on their surfaces. Additionally, the compressive residual stress in substrate WC was found to increase greatly when subjected to sand blasting treatment. However, the compressive residual stress decrease after coating regardless of sand blasting treatment. Nevertheless, it is confirmed that the compressive residual stress generated in the coating after sand blasting is less than that in the non-sandblasting coating. This was attributed to the plastic deformation occurring in the WC substrate during coating after sand blasting. In contrast to the scratch test results, sand blasting was assumed to have a negative effect on the adhesion between the coating and substrate. This is because there is a high possibility of microcracks due to plastic deformation in the WC substrate under the coating after sand blasting.

• 한국분말재료학회지
• /
• 제27권2호
• /
• pp.111-118
• /
• 2020

The convergence of artificial intelligence with smart factories or smart mechanical systems has been actively studied to maximize the efficiency and safety. Despite the high improvement of artificial neural networks, their application in the manufacturing industry has been difficult due to limitations in obtaining meaningful data from factories or mechanical systems. Accordingly, there have been active studies on manufacturing components with sensor integration allowing them to generate important data from themselves. Additive manufacturing enables the fabrication of a net shaped product with various materials including plastic, metal, or ceramic parts. With the principle of layer-by-layer adhesion of material, there has been active research to utilize this multi-step manufacturing process, such as changing the material at a certain step of adhesion or adding sensor components in the middle of the additive manufacturing process. Particularly for smart parts manufacturing, researchers have attempted to embed sensors or integrated circuit boards within a three-dimensional component during the additive manufacturing process. While most of the sensor embedding additive manufacturing was based on polymer material, there have also been studies on sensor integration within metal or ceramic materials. This study reviews the additive manufacturing technology for sensor integration into plastic, ceramic, and metal materials.

• 한국진공학회지
• /
• 제13권4호
• /
• pp.175-181
• /
• 2004

미소인장시험을 통해 304 스테인리스 스틸 판재 위에 증착된 DLC 박막의 안정성을 평가하였다. 모재의 소성 변형과 함께 코팅 층의 손상이 발생하기 시작하는데, 작은 규모의 모재 변형 시에는 인장축의 수직방향으로 박막의 균열이 발생하지만, 모재의 슬립변형이 발생하기 시작하면 인장 축과 $45^{\circ}C$의 각도를 갖는 슬립 면을 따라 필름의 박리가 발생하였다. DLC박막의 박리면적으로부터 필름의 접착력을 평가할 수 있었으며, 필름의 합성 전에 실시하는 Ar 플라즈마 스퍼터링 세척시간이 길수록 그리고 세척시 기판에 인가되는 전압이 높을수록 필름의 접착력은 향상되었다. 이러한 변화는 스테인리스 스틸 모재와 Si 접합 층간의 계면특성이 향상되면, 필름의 전체 접착력을 증진시킬 수 있음을 보여주고 있다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권5호
• /
• pp.396-403
• /
• 2006

Changes in cell adhesion molecules are associated with infiltration and metastatic progression of cancer. Reduced expression of E-cadherin and ${\beta}-catenin$ complex in some carcinomas has been reported. The changes in the expression in oral squamous cell carcinoma (OSCC) is not fully understood and it also remains undetermined whether the expression of these adhesion molecules in metastatic lesions differs from that in the primary lesions. In the present study, therefore, we immunohistochemically examined the expression of E-cadherin and ${\beta}-catenin$ in 45 primary OSCCs and 19 metastatic lymph nodes. We compared the expression of these molecules between primary and metastatic lesions and investigated the correlation between the expression and clinicopathologic parameters. The expression of E-cadherin and ${\beta}-catenin$ was reduced in 35/45 (78.2%), 14/45 (31.2%) of primary tumors respectively, but 18/19 (94.7%) and 17/19 (89.4%) of lymph nodes showed preserved expression. The reduced expression of the E-cadherin was associated with lymph node metastasis, invasive mode and marginal status but no significant relationship was not found with ${\beta}-catenin$. In conclusion, the loss of E-cadherin and ${\beta}-catenin$ complex function is associated with progression of OSCC and suggest that the expression of this complex will be a supplementary prognostic tool.

• 접착 및 계면
• /
• 제3권4호
• /
• pp.1-9
• /
• 2002

본 연구의 목적은 목분과 폴리프로필렌으로 제조한 목질-고분자 복합재료의 점탄성적 성질에 미치는 결합제, 기핵제의 영향에 대해 고찰하는데 있으며, 목분과 결합제간의 esterification 반응이 목질-고분자 복합재의 기계적 성질에 미치는 영향 또는 고찰하고자 한다. 복합재는 목분 60%와 폴리프로필렌 40%를 혼합하여 제조하였으며, DMTA (Dynamic mechanical thermal analysis)를 사용하여 damping peaks (than ${\delta}$), storage modulus (E'), loss modulus (E")를 측정하였다. 또한 XPS (X-ray Photolectron Spectroscopy)를 사용하여 목분에 MAPP를 처리하기 전과 후의 상태를 고찰하였다. DMA 시험은 온도범위 $-20{\sim}100^{\circ}C$에서 여러가지 주파수 (1, 5, 10, 25 HZ) 조건과, 승온속도 $5^{\circ}C/min$으로 실시하였다. 이 시험결과를 토대로 복합재의 활성화에너지를 구하여 결합제와 기핵제가 목분과 고분자물질간 계면의 성질에 미치는 영향을 고찰하였다.

• Archives of Plastic Surgery
• /
• 제38권1호
• /
• pp.81-84
• /
• 2011

Purpose: Nerve injury is one of the complication which can develop after brow lift. Peripheral nerve ending which is stretched from supraorbital nerve and supratrochlear nerve can be injured and symptoms such as pain, dysesthesia may appear. Usually, developed pain disappeared spontaneously and does not go on chronic way. We experienced a case that a patient complained chronic pain after brow lift which was not controlled by conservative management such as medications, local nerve block and report a successful surgical treatment of chronic pain after brow lift. Methods: A 24-year-old male who received brow lift with hairline incision at local hospital was admitted for chronic pain at the right forehead. The pain was continued for 3 months even though fixed thread was removed. Local nerve block at trigger point with mixed 1 mL 2% lidocaine and 1 mL Triamcinolone acetonide was done and oral medications, Gabapentine and carbamazepine, were also applied but there was no difference in the degree of pain. Therefore the operation was performed so that careful dissection was carried out at right supraorbital neurovascular bundle and adhered supraorbital nerve was released from surrounding tissues and covered with silastic sheet to prevent adhesion. Results: The pain was gradually relieved for a week. The patient was discharged without complications. No evidence of recurrence has been observed for 2 years. Conclusion: The pain developed after brow lift was engaged with nerve injury and sometimes remains chronically. Many kinds of conservative management to treat this complication such as medications, local nerve block have been reported and usually been used. But there are some chronic cases that conservative treatment do not work. In sum, we report 1 case of successful surgical treatment for relief of intractable pain developed after brow lift surgery.

• 마이크로전자및패키징학회지
• /
• 제15권1호
• /
• pp.65-69
• /
• 2008

본 연구는 실리콘 칩의 휨 강도가 칩 이면에 존재하는 웨이퍼 그라인딩 관련 결함(스크래치)의 존재에 크게 영향을 받을 수 있음을 보여준다. 반면, 프라스틱을 이용하여 몰딩된 패키지 상태에서의 휨 강도는 칩 이면과 패키지 몸체와의 접착력이 우수할 경우 칩 이면의 스크래치에 의해 크게 영향을 받지 않음을 보여준다. 본 논문에서 프라스틱 패키징 전후 스크래치 마크에 대한 휨 강도의 차별화된 의존도가 왜 발생하는지에 대한 설명이 수록되어 있다. 본 연구에서는 웨이퍼의 이면연마 과정에서 필연적으로 남게 되는 스크래치 마크를 가진 칩들을 프라스틱 패키징 하여 휨 강도를 평가하였다. 칩의 휨 강도는 스크래치 마크의 깊이에 따라 크게 영향을 받지만, 패키지 상태에서는 그 영향력이 크지 않다는 것을 알 수 있었다. 분석결과 거친 스크래치를 가진 칩들은 프라스틱 패지지 몸체와의 결합력이 양호하여 칩 이면의 스크래치 마크에 집중될 수 있는 응력을 패키지 몸체에 의해 상당부분 흡수할 수 있기 때문인 것으로 평가되었다. 따라서, 얇은 패키지의 개발을 위해서는 칩 이면에 존재하는 스크래치의 제거뿐만 아니라 칩과 패키지 몸체 사이의 접착력 향상을 위한 방안이 함께 고려되어야 한다는 것을 알 수 있다. 또한, EMC 재질 개선에 의해 웨이퍼 그라인딩 공정 단순화를 이루어 제품의 가격 경쟁력을 높일 수 있을 것으로 전망된다.

• 대한두경부종양학회지
• /
• 제3권1호
• /
• pp.37-54
• /
• 1987

The aim of surgery for all parotid masses is directed toward total removal of the tumor with adequate safe margins of adjacent normal tissue and preservation of the facial nerve whenever possible. Reconstructive procedures following parotidectomy for benign or low grade malignant lesions are most commonly necessary if soft tissue deficits appear at the angle of the mandible below the earlobe as a major cosmetic deformity. This is a report of Z4 cases with a diagnosis of parotid tumor who were treated using various surgical procedures at Department of Plastic and Reconstructive Surgery, Hanyang University Hospital over the period of 4 years from January, 1983 to December, 1986. Among 24 cases, 11 cases were reconstructed by Sternocleidomastoid muscle flap at the same time that extirpative surgery is outlined. The advantage of Sternocleidomastoid muscle flap is the coverage of the facial nerve, so adhesion between the facial nerve and skin was prevented. Absorption and loss of bulk was not found such as dermofat graft. It was a simple method. Neither donor site defect nor sternocleidomastoid muscle deformity was developed. Sternocleidomastoid muscle flap have been found satisfactory in maintaining filled-out soft tissue hollows with good result cosmetically and functionally.

• 대한두개안면성형외과학회지
• /
• 제23권5호
• /
• pp.228-231
• /
• 2022

Fibrin glue is a topical agent widely used for hemostasis, wound healing, and surgical adhesion. Complications of fibrin glue itself are extremely rare because it is absorbed over time, but can occur as a result of inappropriate application. We report a case of a postoperative complication caused by inappropriate application of fibrin glue in blow-out fracture surgery. A 65-year-old male patient presented with periorbital swelling and an open wound on the right infraorbital area. Computed tomography showed a right orbital floor fracture. After reduction of the herniated tissue into the orbit, an implant was inserted and fibrin glue was applied to stabilize the implant. This procedure was performed without difficulty, but the patient complained of persistent diplopia and limited eyeball movement after surgery. An imaging study showed a mass-like lesion, which was not a hematoma, in the orbital cavity. In a second operation, the mass was identified as clotted fibrin glue that had not been applied properly. After removal, the patient's symptoms were relieved without further complications. Appropriate and careful application of fibrin glue is necessary to avoid unnecessary complications.