• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.745-751
• /
• 2011

입자강화 알루미늄 복합재의 강도를 계산하기 위하여 압밀 후 냉각할 때 일어나는 전위 펀칭을 유한요소로 모델링 하였다. 다양한 입자의 체적비에서 입자의 크기가 강도에 미치는 영향을 고려하기 위하여 강화 입자 주위에 변형률 구배 소성과 테일러 전위 모델을 적용하였다. 변형률 구배는, 구형 단위 셀이 냉각하는 동안 입자와 기지재의 열팽창계수 차이에 의한 전위 펀칭이 일어날 때 형성되는 등가소성변형률로부터 구하였다. 펀칭된 영역에 걸쳐 평균적으로 변형률 구배를 고려함으로써 항복 응력이 증가하는 것을 관찰하였다. 유한요소 해석을 활용하여 다양한 입자 크기와 체적비에 대하여 SiC 강화 알루미늄 356-T6 복합재의 축대칭 단위 셀의 인장시 강도의 변화를 예측하였다. 예측된 강도는 실험 데이터와 잘 일치하며, 입자 크기 의존 효과를 분명히 보인다.

• Steel and Composite Structures
• /
• 제27권3호
• /
• pp.337-353
• /
• 2018

In previous weak-axis moment connection tests, brittle fracture always initiated near the edge of the beam flange groove weld due to force flow towards the stiffer column flanges, which is the opposite pattern as strong-axis moment connections. As part of the China NSFC (51278061) study, this paper tested two full-scale novel weak-axis reduced beam section moment connections, including one exterior frame connection specimen SJ-1 under beam end monotonic loading and one interior frame joint specimen SJ-2 under column top cyclic loading. Test results showed that these two specimens were able to satisfy the demands of FEMA-267 (1995) or ANSI/AISC 341-10 (2010) without experiencing brittle fracture. A parametric analysis using the finite element software ABAQUS was carried out to better understand the cyclic performance of the novel weak-axis reduced beam section moment connections, and the influence of the distance between skin plate and reduced beam section, a, the length of the reduced beam section, b, and the cutting depth of the reduced beam section, c, on the cyclic performance was analyzed. It was found that increasing three parametric values reasonably is beneficial to forming beam plastic hinges, and increasing the parameter a is conducive to reducing stress concentration of beam flange groove welds while increasing the parameters b and c can only reduce the peak stress of beam flange groove welds. The rules recommended by FEMA350 (2000) are suitable for designing the proposed weak-axis RBS moment connection, and a proven calculation formulation is given to determine the thickness of skin plate, the key components in the proposed weak-axis connections. Based on the experimental and numerical results, a design procedure for the proposed weak-axis RBS moment connections was developed.

• Earthquakes and Structures
• /
• 제18권5호
• /
• pp.527-542
• /
• 2020

In traditional eccentrically braced steel frames, damages and plastic deformations are limited to the links and the main structure members are required tremendous sizes to ensure elasticity with no damage based on the force-based seismic design method, this limits the practical application of the structure. The high strength steel frames with eccentric braces refer to Q345 (the nominal yield strength is 345 MPa) steel used for links, and Q460 steel utilized for columns and beams in the eccentrically brace steel frames, the application of high strength steels not only brings out better economy and higher strength, but also wider application prospects in seismic fortification zone. Here, the structures with four type eccentric braces are chosen, including K-type, Y-type, D-type and V-type. These four types EBFs have various performances, such as stiffness, bearing capacity, ductility and failure mode. To evaluate the seismic behavior of the high strength steel frames with variable eccentric braces within the similar performance objectives, four types EBFs with 4-storey, 8-storey, 12-storey and 16-storey were designed by performance-based seismic design method. The nonlinear static behavior by pushover analysis and dynamic performance by time history analysis in the SAP2000 software was applied. A total of 11 ground motion records are adopted in the time history analysis. Ground motions representing three seismic hazards: first, elastic behavior in low earthquake hazard level for immediate occupancy, second, inelastic behavior of links in moderate earthquake hazard level for rapid repair, and third, inelastic behavior of the whole structure in very high earthquake hazard level for collapse prevention. The analyses results indicated that all structures have similar failure mode and seismic performance.

• Earthquakes and Structures
• /
• 제17권6호
• /
• pp.611-621
• /
• 2019

Precast concrete structure has many advantages, but the assembled seam will affect potentially the overall seismic performance of structure. Based on the sidewall joint located in the bottom of assembled monolithic subway station, the main objectives of this study are, on one hand to present an experimental campaign on the seismic behavior of precast sidewall joint (PWJ) and cast-in-place sidewall joint (CWJ) subjected to low-cycle repeated loading, and on the other hand to explore the effect of shape and position of assembled seam on load carrying capacity and crack width of precast sidewall joint. Two full-scale specimens were designed and tested. The important index of failure pattern, loading carrying capacity, deformation performance and crack width were evaluated and compared. Based on the test results, a series of different height and variably-shape of assembled seam of precast sidewall joint were considered. The test and numerical investigations indicate that, (1) the carrying capacity and deformation capacity of precast sidewall and cast-in-place sidewall were very similar, but the crack failure pattern, bending deformation and shearing deformation in the plastic hinge zone were different obviously; (2) the influence of the assembled seam should be considered when precast underground structures located in the aquifer water-bearing stratum; (3) the optimal assembled seam shape and position can be suggested for the design of precast underground concrete structures according to the analysis results.

• 터널과지하공간
• /
• 제23권4호
• /
• pp.280-287
• /
• 2013

터널의 안정성 평가방법 중 유한요소법이나 유한차분법과 같은 수치해석을 수행하면 정밀한 지반거동을 예측할 수 있으나 터널노선 전구간에 대한 수치해석은 경제적으로 비효율적이다. 따라서 본 연구에서는 이론해를 사용하고 이를 적용할 수 있도록 터널을 등가면적의 원형으로 가정하여 터널 전구간에 대한 안정성을 분석하는 방법을 제시하였다. 이를 실제 터널에 적용하여 터널 전구간에 대해 예상되는 변형거동과 정량적인 변형률 및 소성반경을 계산하였고 이로부터 변형을 적정한 수준 이내로 제한하기 위한 지보압을 제시하였다. 적용 결과 제안된 방법은 전체 터널 구간에 대한 신속한 안정성 평가와 주요 불안정 구간에 대한 정밀 해석이나 계측설계와 같은 후속조치를 위한 정량적 자료를 제공할 수 있음을 확인하였다.

• 한국강구조학회 논문집
• /
• 제26권2호
• /
• pp.133-142
• /
• 2014

상 하부 T-stub 접합부는 보와 기둥의 강성비, T-stub의 기하학적 형상변화, 긴결재의 개수, 패널존 효과 등의 영향에 따라서 보통모멘트골조 및 특수모멘트골조에 적합한 거동특성을 나타내는 완전강도 부분강접 접합부(full strength partial restrained connection)이다. 이러한 상 하부 T-stub 접합부가 구조적으로 안전하게 거동하기 위해서는 충분한 강도, 강성, 연성능력을 나타내어야 한다. 이 연구는 T-stub의 기하학적 형상변화가 상 하부 T-stub 접합부의 모멘트-회전각 관계에 미치는 영향을 파악하고, 이에 따른 상 하부 T-stub 접합부의 초기회전강성을 평가하기 위해 진행하였다. 이를 위하여 T-stub의 기하학적 형상변수 ${\alpha}^{\prime}$값을 변화시킨 2개의 상 하부 T-stub 접합부 실험체를 제작하여 접합부 실험을 수행하였고, 3차원 비선형 유한요소해석도 수행하였다.

• 콘크리트학회논문집
• /
• 제15권2호
• /
• pp.263-272
• /
• 2003

내진상세가 적용되지 않은 RC중공구형단면 교각의 지진 시 거동특성 및 내진성능을 파악하기 위하여 축소모델 실험을 수행하였다. 축소모델은 교각의 소성힌지영역내에 동일한 위치에서 모든 주철근이 겹침이음된 모델과 연속된 철근을 사용하여 겹침이음을 없앤 모델로 설계하였다. 실험은 축력이 재하된 상태에서 준정적 반복하중을 재하하였다. 실험결과 겸침이음모델은 주철근의 겹침이음부에서의 부착파괴가 발생하였지만 비교적 큰 연성거동을 나타냈으며 연속철근을 사용한 모델은 전형적인 휨파괴 특성과 매우 큰 연성거동을 보였다.

• Steel and Composite Structures
• /
• 제26권3호
• /
• pp.329-345
• /
• 2018

This paper systematically investigated the mechanical performance of the weak-axis cover-plate connection, including a beam end monotonic loading test and a column top cyclic loading test, and a series of parametric studies for exterior and interior joints under cyclic loading using a nonlinear finite element analysis program ABAQUS, focusing on the influences of the shape of top cover-plate, the length and thickness of the cover-plate, the thickness of the skin plate, and the steel material grade. Results showed that the strains at both edges of the beam flange were greater than the middle's, thus it is necessary to take some technical methods to ensure the construction quality of the beam flange groove weld. The plastic rotation of the exterior joint can satisfy the requirement of FEMA-267 (1995) of 0.03 rad, while only one side connection of interior joint satisfied ANSI/AISC 341-10 under the column top cyclic loading. Changing the shape or the thickness or the length of the cover-plate did not significantly affect the mechanical behaviors of frame joints no matter in exterior joints or interior joints. The length and thickness of the cover-plate recommended by FEMA 267 (1995) is also suitable to the weak-axis cover-plate joint. The minimum skin plate thickness and a design procedure for the weak-axis cover-plate connections were proposed finally.

• 한국터널지하공간학회 논문집
• /
• 제2권2호
• /
• pp.62-71
• /
• 2000

지하채굴작업에 의한 공동 및 폐갱 등은 지반침하 및 지표함몰현상의 주요 원인이 되며, 근접시공 지하구조물 또는 인근 구조물의 안정성 저해요소로 대두되고 있다. 이에 대한 대책방안으로 폐갱을 충진재로 채우는 보강시공을 수행하는 경우가 있으나 설계방법 및 안정성 해석방법이 미흡한 실정이다. 따라서 본 연구에서는 폐갱 등 지하공동에 의한 주변지반의 영향권을 수치적으로 분석하고 실제 수치해석 과정에서 주변 암반의 장기거동을 고려할 수 있는 방안을 제시하였다. 아울러 폐갱 인근의 구조적 안정성을 향상시키기 위하여 지하공동을 뒷채움재로 충진한 경우, 안정성 평가 및 암반의 거동을 수치적으로 분석할 수 있는 기법을 제시하였으며 불완전한 뒷채움재의 영향을 함께 고려하였다.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2894-2900
• /
• 1996

The stream generator tubes represent an integral part of a major barrier against the fission product release to the environment. So, the rupture of these tubes could permit flow of reactor coolant into the secondary system and injure the safety of reactor coolant system. Therefore, if the crack was detected during In-Service Inspection of tubes the cracked tube should be evaluated by the pulgging criteria and plugged or not. In this study, the fracture mechanics evaluation is carried out on the thru-wall axial crack due to Primary Water Stress Corrosion Cracking in the roll transition aone of steam generator tube to help the assurence the integrity of tubes and estabilish the plugging criteria. Due to the Inconel which is used as tube material is more ductile than others, the plastic instability repture theory was used to calculate the critical and allowable crack length. Based on Leak Before Break concept the leak rate for the critical crack length and the allowable leak rate are compared and the safety of tubes was given.