• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.45-50
• /
• 2022

The etching with high selectivity of silicon dioxide over silicon nitride is essential in semiconductor fabrication, and gas phase etch (GPE) can increase the competitiveness of the selective dielectric etch. In this work, GPE of plasma enhanced chemical vapor deposited SiO₂ was performed, and the effects of process parameters, such as temperature, partial pressure ratio, and gas supply cycle, are investigated in terms of etch rate and within wafer uniformity. Employing multiple regression analysis, the importance of each parameter elements is analyzed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.209-212
• /
• 2001

Polyimide(PI) films have been considered as the interlayer dielectric materials due to low dielectric constant, low water absorption, high gap-fill and planarization capability. The PI film was etched with using inductively coupled plasma (ICP). The etching characteristics such as etch rate and selectivity were evaluated to gas mixing ratio. High etch rate was 8300$\AA$/min and vertical profile was approximately acquired 90$^{\circ}$ at CF$_4$/(CF$_4$+O$_2$) of 0.2. The selectivies of polyimide to PR and SiO$_2$ were 1.2, 5.9, respectively. The etching profiles of PI films with an aluminum pattern were measured by a scanning electron microscope (SEM). The chemical states on the PI film surface were investigated by x-ray photoelectron spectroscopy (XPS). Radical densities of oxygen and fluorine in different gas mixing ratio of 07CF4 were investigated by optical emission spectrometer (OES).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.105-115
• /
• 2015

In semiconductor etching simulation, The source modeling for generating plasma species is required. In this paper, we modeled the source of plasma etching process with probability distribution and the feature profile with simple geometry objects, then got the flux on the feature profile. The distance between the source and the cell on the modeling parameters of the source, there are a number of particles to be emitted from a source, there is a number (area of the cell) of the cell on the profile with additional parameters to give the calculation of flux. The flux error ratio on both gaussian(Incident Flux) and cosine probability distribution(Incident Neutral Flux) is much decreased as the number of ray is increased but the processing time is more increased than that. The increase of the number of cell and distance makes increase the flux error ratio and the processing time moderately. In view of the processing time through the experimental results in this paper, it is possible to analogize the calculation of appropriate fluxes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.67-67
• /
• 2009

Due to the scaling down of the dielectrics thickness, the leakage currents arising from electron tunneling through the dielectrics has become the major technical barrier. Thus, much works has focused on the development of high k dielectrics in both cases of memories and CMOS fields. Among the high-k materials, $Al_2O_3$ considered as good candidate has been attracting much attentions, which own some good properties as high dielectric constant k value (~9), a high bandgap (~2eV) and elevated crystallization temperature, etc. Due to the easy control of ion energy and flux, low ownership and simple structure of the inductively coupled plasma (ICP), we chose it for high-density plasma in our study. And the $BCl_3$ was included in the gas due to the effective extraction of oxygen in the form of BClxOy compound. In this study, the etch characteristic of ALD deposited $Al_2O_3$ thin film was investigated in $BCl_3/N_2$ plasma. The experiment were performed by comparing etch rates and selectivity of $Al_2O_3$ over $SiO_2$ as functions of the input plasma parameters such as gas mixing ratio, DC-bias voltage and RF power and process pressure. The maximum etch rate was obtained under 15 mTorr process perssure, 700 W RF power, $BCl_3$(6 sccm)/$N_2$(14 sccm) plasma, and the highest etch selectivity was 1.9. We used the x-ray photoelectron spectroscopy (XPS) to investigate the chemical reactions on the etched surface. The Auger electron spectroscopy (AES) was used for elemental analysis of etched surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.449-453
• /
• 2003

Ferroelectric YMnO$_3$ thin films were etched with Ar/Cl$_2$ and CF$_4$/Cl$_2$ inductively coupled plasma (ICP). The maximum etch rate of YMnO$_3$ thin film was 300 $\AA$/min at a Ar/Cl$_2$ gas mixing ratio of 2/8, a RF power of 800 W, a DE bias of 200 V, a chamber pressure of 15 mTorr, and a substrate temperature of 30 $^{\circ}C$. From the X-ray photoelectron spectroscopy (XPS) analysis, yttrium etched by chemical reactions with Cl radicals assisted by Ar ion bombardments in Ar/Cl$_2$ plasma. In CF$_4$/Cl$_2$ plasma, yttrium are remained on the etched surface of YMnO$_3$ and formed of nonvolatile YF$_{x}$ compounds manganese etched effectively by chemical reactions with Cl and F radicals. From the X-ray diffraction (XRD) analysis, the (0004) diffraction peak intensity of the YMnO$_3$ thin film etched in Ar/Cl$_2$ plasma shows lower value than that in CF$_4$/Cl$_2$ plasma. It indicates that the crystallinty of YMnO$_3$ thin film is more easily damaged by the Ar ion bombardment than the changes of stoichiometry due to nonvolatile etch by-products.s.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.71-72
• /
• 2007

In this study, we investigated the fabrication of MLR (multi-layer resist) with a very thin diamond-like carbon (DLC) layer. ArF PR/$SiO_2$/DLC MLR structure was investigated and etching characteristics of the DLC layer was patterned using $SiO_2$ hard-mask by varying the process parameters such as different high-frequency/low-frequency combination ($f_{LF}/f_{HF}$), HF/LF power ratio ($P_{HF}/P_{LF}$), $O_2$ flow and $N_2$ flow rate in $O_2/N_2$/Ar plasmas. The results indicated an increased etch rate of DLC for the higher $f_{LF}/f_{HF}$ combination and for the increased low-frequency power ($P_{LF}$). And the etch rate of DLC was decreased with increasing the $N_2$ flow rate in $O_2/N_2$/Ar plasmas. In order to confirm the application of DLC MLR for the etching process of silicon oxide, the stack of ArF PR/BARC/$SiO_2$/DLC/TEOS/Si was investigated.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.541-547
• /
• 2015

In current semiconductor manufacturing, as the feature size of integrated circuit (IC) devices continuously shrinks, detecting endpoint in plasma etching process is more difficult than before. For endpoint detection, various kinds of sensors are installed in semiconductor manufacturing equipments, and sensor data are gathered with predefined sampling rate. Generally, detecting endpoint is performed using OES data of by-product. In this study, OES data of both by-product and etchant gas are used to improve reliability of endpoint detection. For the OES data pre-processing, a combination of Signal to Noise Ratio (SNR) and Principal Component Analysis (PCA),are used. Polynomial Regression and Expanded Hidden Markov model (eHMM) technique are applied to pre-processed OES data to detect endpoint.

• Korean Journal of Materials Research
• /
• v.13 no.10
• /
• pp.635-639
• /
• 2003

We investigated dry etching of GaAs and AiGaAs in a high density planar inductively coupled plasma system with BCl$_3$and BCl$_3$/Ar gas chemistry. A detailed etch process study of GaAs and ALGaAs was peformed as functions of ICP source power, RIE chuck power and mixing ratio of $BCl_3$ and Ar. Chamber process pressure was fixed at 7.5 mTorr in this study. The ICP source power and RIE chuck power were varied from 0 to 500 W and from 0 to 150 W, respectively. GaAs etch rate increased with the increase of ICP source power and RIE chuck power. It was also found that etch rates of GaAs in $15BCi_3$/5Ar plasmas were relatively high with applied RIE chuck power compared to pure 20 sccm $BCl_3$plasmas. The result was the same as AlGaAs. We expect that high ion-assisted effect in $BCl_3$/Ar plasma increased etch rates of both materials. The GaAs and AlGaAs features etched at 20 sccm $BCl_3$and $15BCl_3$/5Ar with 300 W ICP source power, 100 W RIE chuck power and 7.5 mTorr showed very smooth surfaces(RMS roughness < 2 nm) and excellent sidewall. XPS study on the surfaces of processed GaAs also proved extremely clean surfaces of the materials after dry etching.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.983-989
• /
• 2012

The purpose of this paper is to decide the optimum synthesis conditions of polycrystalline diamond films according to the ratio of gas mixture. Diamond films were deposited with cyclo-hexane as a carbon precursor by the microwave plasma enhanced chemical vapor deposition process. The optimum oxygen ratio to cyclo-hexane was reached about 125 % under the fixed 0.3% c-hexane in hydrogen. Oxygen plays a role in etching the graphitic components of carbon sp2 bond effectively. By OES measurement, the best synthesis conditions found out about 12.5 % and 15.75 %, which is the emission intensity ratios of CH(B-X) and $H{\beta}$ on $H{\alpha}$, respectively. Also, the electron temperature was similar about 5,000 to 5,200 K in this work.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.3
• /
• pp.1-5
• /
• 2000

Inductively coupled plasma (ICP) excited by a spiral planar antenna is used to etch elctrodes for PZT capacitors. Pt/RuO$_{2}$ bilayers are tested as bottom electrodes for PZT capacitors in order to utilize better leakage characteristics of Pt and easy etch characteristics of RuO$_{2}$ at the same time. The etch rates and selectivities to SiO$_{2}$ hard mask have been measured for each of Pt and RuO$_{2}$ in terms of various plasma conditions. As Cl$_{2}$ ratio increases in $O_{2}$/Cl$_{2}$ mixture, the etch rate of Pt increases while that of RuO$_{2}$ reaches the highest near 10 ％ of Cl$_{2}$. Optimum gas mixture ratio has been determined for etching Pt and RuO$_{2}$ bilayers sequentially, and sub-half micron patterning is demonstrated.