• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.45-52
• /
• 2009

This study is related to the realization of high speed address driving method for Full-HD PDP. The new self-priming addressing(SPA) driving scheme was proposed to improve an address discharge time lag, which utilizes the priming effect maintaining the priming discharge during an address period. In this study, the basic characteristics of the priming ramp discharge were investigated and optimize the reset pulse and priming pulse. It is noted that the address discharge time lag is significantly improved from 1.2[${\mu}s$] to 0.8[${\mu}s$] when the slope of the priming ramp pulse is below 0.1[$V/{\mu}s$].

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.711-712
• /
• 2009

The fabrication of micro-scale irregular holes by using PMMA (Poly Methyl Methacrylate) beads in the front dielectric layer was proposed to improve luminous efficacy of an ac plasma display panel. Through the firing process of front dielectric layer, bowl shaped holes with a depth of $2.5{\mu}m$, a top diameter of $8-12{\mu}m$, and a bottom diameter of $4-7{\mu}m$ were fabricated. The proposed ac plasma display panel with the irregular micro-scale holes improved the luminous efficacy by 18 % due to the decrease in the minimum sustain voltage.

• Korean Journal of Metals and Materials
• /
• v.46 no.2
• /
• pp.97-104
• /
• 2008

Black interlayer was introduced into between ITO and Bus electrodes to enhance a bright room contrast ratio of a plasma display panel. To measure the electrical resistance of the black interlayer, we designed two test patterns, type I and type II, of which type II pattern was successful. Using type II test pattern, the electrical resistance of the black interlayer was measured to be $300{\Omega}$ for $2{\mu}m$ thickness case and infinitely high for 4, $6{\mu}m$ thickness. This result shows that electrical resistance of the black interlayer in the ITO/black interlayer/Bus electrodes structure is a critical parameter which determines the electrical characteristics of the PDP.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.196-196
• /
• 2003

현재 PDP(Plasma Display Panel) 상판의 유전체층은 저온에서 소성이 가능한 저융점 유리가 요구되기 때문에 융점을 낮추기에 용이한 PbO계가 주 성분으로 사용되어 오고 있으나. 최근 환경오염 등의 문제점으로 인해 Pb-free을 추구하는 새로운 유리조성의 연구가 많이 수행되고 있다. 이에 본 연구는 이미 PDP의 격벽과 봉착용 조성으로 많이 연구되어진 비스무스계 유리를 고려하여 PDP의 투명유전체용 조성을 찾고자 한다. Bi$_2$O$_3$-ZnO-SiO$_2$3원계를 기본으로 하는 유리조성에 유리망목형성제등을 첨가하여 열적특성과 광학적 특성을 조사하였다. 열적특성은 DTA를 이용하여 유리 전이 점(Tg) 및 융점(Tl)등을 측정하였고 TMA를 이용하여 선팽창계수(CTE)를 측정하였으며 유리섬유를 제조한 후 Littleton softening point (Ts)를 측정하였다. 광학적 특성은 페이스트를 제조하여 스크린프린팅 후 54$0^{\circ}C$~$600^{\circ}C$에서 1-2 h동안 소성하여 투광성을 조사하였다. 그 결과로, 열적특성으로는 400~5$50^{\circ}C$의 Tg, 450~$600^{\circ}C$의 Ts 및 5~11$\times$$10^{-6}$K의 CTE 값을 나타 내었고 광학적 특성으로 투광성은 양호한 특성(60% 이상)을 나타내었다. Bi$_2$O$_3$ 계를 현재 PDP의 투명유 전체에 적용시키기에는 유리용융시에 높은 점도와 환원 등의 문제점을 갖고 있지만 열적특성과 광학특성면에서는 가능성을 제시하여 향후 연구를 할 가치가 있다고 본다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.269-273
• /
• 2013

This paper analyzed a potential interference of electric equipments on radio service below 30MHz through an experiment with a PDP(Plasma Display Panel) TV and a RF(Radio Frequency) light bulb in an anechoic chamber. The radiation levels of the PDP TV and the RF light bulb are measured and a combined interference is calculated on the basis of the experimental value. As a result, the combined interference signal level is increased according to the number of interferer. The possibility of a potential interference from electric equipments on radio service below 30MHz is realized through comparison between the measured radiation value of electric equipments and the CISPR(International Special Committee on Radio Interference) 11 limit.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.2 s.107
• /
• pp.107-114
• /
• 2006

The present experimental study deals with noise reduction and improvements in cooling performance in a plasma display panel (PDP) television (TV). The main ideas of the fan system noise reduction are maintenance of uniform inflow condition and reduction of the system loss, ${\Delta}P.$ The discrete noise is mainly related with the inflow condition therefore removing the structure which distorts inflow makes the discrete noise reduction. The broadband noise in PDP TV is related with the system losses which result from the presence of the fan downstream obstacle, PDP rear case. Through the modification of the distance and preventing the leakage flow between the fan and rear case, we can obtain the system loss and broadband noise reduction. Additionally we can reduce fan rotating speed because of increased flow rate which obtains from the reduction of system loss (resistance). Finally, 4.2 dB(A) noise reduction and $10\%$ increase in flow rate are achieved. From these results, we show that the reduction of system loss is the most effective way of the fan system noise reduction.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.72-74
• /
• 2002

In this paper, we showed the erosion characteristics of MgO protector layer releated to lifetime of plasma display panel(PDP). We observed MgO erosion characteristic as a functions of deposition conditions. In RIE condition of Xe gas, the lowest erosion rate appears in the conditions of no heating, bias voltage -30V and pressure 5mtorr. In general. as deposition rate increases, erosion rate decreases.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1688-1691
• /
• 2007

This paper shows that the boundary image sticking can be prohibited completely by using the vacuum sealing process, which means that the residual impurities such as nitrogen or oxygen can be a critical factor inducing the boundary image sticking. The production of boundary image sticking was checked in the test panel fabricated by the $N_2$ or $O_2$ flow during the vacuum sealing process. As a result, the boundary image sticking did not appear in the case of $N_2flow$, whereas the boundary image sticking was observed in the case of $O_2$ flow even though the test panel was fabricated by the vacuum sealing process.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.6
• /
• pp.292-296
• /
• 2002

A new sustain driving method for the AC PDP is presented. In this driving method, the voltage source is connected to a storage capacitor, this storage capacitor charges an intermediate capacitor through LC resonance, and the panel is charged from the intermediate capacitor indirectly. In this way, the current flowing into the AC PDP when the sustain discharge occurs is reduced because the current is indirectly supplied from a capacitor, a limited source of charge. Thus, the input power to the output luminance efficiency is improved. Since the voltage supplied to the storage capacitor is doubled through LC resonance, this method call drive an AC PDP with a voltage source of about half of the voltage necessary in the conventional driving methods. The experiments showed that this charge-controlled driving method could drive ail AC PDP with a voltage source of as low as 107V. Using a panel of the conventional structure, luminous efficiency of 1.28 lm/W was achieved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.643-646
• /
• 2002

Sealing of two glass plates composing of PDP panel was done in a vacuum chamber by using an auxiliary heating line(AHL). In order to improve the uniformity of sealing temperature and reduce the panel temperature during sealing, the AHL was introduced by a screen printing method inside a frit glass and used as a part of heating source for the frit melting. By using the AHL technology and the specially prepared frit glass, we have successfully sealed a PDP test panel without bubbles and any leak through the frit glass.