• Clean Technology
• /
• v.25 no.4
• /
• pp.311-315
• /
• 2019

The cation extraction and impurity separation were studied in order to investigate the recyclability of a slag produced from the steel refinery industry. Two types of slag (Slag-A, B) were collected and characterized in this study. The initial characterization by X-ray diffraction (XRD) and X-ray fluorescence (XRF) confirmed the existence of various kinds of ions in the slag such as Ca²⁺ (30 ~ 40%), Fe³⁺ (20 ~ 30%), Si⁴⁺ (15%), Al³⁺ (10%), Mn²⁺ (7%), and Mg²⁺ (3 ~ 5%). Inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis on the extracted slag using 2 M HCl as a solvent indicated that a higher concentration of Ca²⁺ was extracted as the S/L ratio was increased. The Ca²⁺ extraction concentration were found to be 8,940 mg L^-1 (Slag-A) and 10,690 (Slag-B) mg L^-1 when the S/L ratio for Ca²⁺ extraction was 0.1. However, the extract was strongly acidic ( < pH 1) at 0.1 S/L. Also the other ions (impurities) were extracted simultaneously in addition to Ca²⁺. To increase the purity of Ca²⁺ in order to transform the slag to a high value resource, a pH-swing was conducted. The impurities tended to precipitate at higher rate as the pH was increased. Notably, the Ca²⁺ rapidly precipitated above a certain pH and at a pH of 10.5, while the selectivity of Ca²⁺ was over 99%. It is expected that the aqueous solution in which high contents of Ca²⁺ was selectively dissolved in this study would be suitable for the carbonation process for reducing CO₂ and for the production of calcium carbonate.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.178-186
• /
• 2016

The present study was conducted to investigate the effect of whole wheat bread with added Lindera obtusiloba (LO) and Capsosiphon fulvescens (CF) ethanol extracts on serum glucose and lipid levels in Sprague Dawley rats. Rats were divided into five groups depending on the diet administered: normal bread (NC), whole wheat bread (W), whole wheat bread with LO leaves extract (WL), whole wheat bread with CF extract (WC), and whole wheat bread with freeze-drying CF (WDC). After 4 weeks of consuming the experimental diet, the blood glucose level and hemoglobin A1c contents were found to be significantly lower in the W, WL, WC, and WDC groups than in the NC group. The high-density lipoprotein-cholesterol levels increased in the WL group when compared to those in the NC group and triglycerides levels decreased in all wheat groups compared to those in the NC group. These results suggest that wheat breads containing LO and CF extracts are effective for preventing hypercholesterolemia and obesity.

• Korean Journal of Poultry Science
• /
• v.41 no.3
• /
• pp.165-171
• /
• 2014

The objective of this experiment was to investigate the effect of dietary supplementation of copper-soy proteinate (Cu-SP) and herbal mixture (HBM) on growth performance, intestinal microflora, and immune response in broiler. A total 1,000 1-d old ROSS 308 (initial $BW=41{\pm}0.38g$) were randomly allotted to 1 of 5 dietary treatments with 4 replicates during d 35 of the feeding trial. Dietary included: (1) Control : control diet, (2) Antibiotics : control diet + Avilamycin 6 ppm, (3) Cu-SP : control diet + 100 ppm Cu-soy proteinate, (4) HBM : control diet + 0.15% herbal mixture, (5) Cu-SP+HBM : control diet + 100 ppm Cu-soy proteinate + 0.2% herbal mixture. Two-phase feeding program with a starter diet from d 0 to 21, and a finisher diet from d 22 to 35 was used in the experiment. Within each phase, a diet was formulated to meet or exceed NRC requirements of broilers for macro- and micronutrients. The diet and water were available ad libitum. Result indicated that during d 22 to 35 and over all periods of the experiment, feed intake and feed conversion ratio were greater (P<0.05) for other treatment than control. Significant differences were found in lymphocyte (LY), and stress indicator (HE:LY ratio). Lymphocyte was greater (P<0.05) for Cu-SP + HBM treatment than control. However, stress indicator (HE:LY ratio) were greater (P<0.05) for control than Cu-SP + HBM treatment. The plasma IgG was higher (P<0.05) in the antibiotics, HBM, and Cu-SP+HBM treatments groups compared with control. The population of Clostridium perfringens in the antibiotics, Cu-SP, HBM, Cu-SP + HBM treatment groups were lower (P<0.05) than those control. These result suggested that dietary copper-soy proteinate or herbal mixture may be used as an alternative to antibiotics to improve growth performance, and intestinal health of birds.

• Journal of Animal Science and Technology
• /
• v.52 no.4
• /
• pp.337-346
• /
• 2010

We report non-specific immune responses and disease resistance against Vibrio anguillarum, Streptococcus iniae and Edwardsiella tarda by dietary supplementation of fermented garlic powder (FGP) in olive flounder for the first time. Four isonitrogenous (45% crude protein) and isocaloric (17.1 MJ/kg) diets were formulated to have 0%, 0.5%, 1% and 2% of the FGP (G-0, G-0.5, G-1 and G-2). The experimental diets were fed to juvenile olive flounder averaging 23.4 g in triplicate groups (90 fish/group) in a flow-through system. After a five-week feeding trial, healthy fish with similar sizes from each tank were selected and injected with 1 ml of three bacteria each to evaluate disease resistance of the fish. During the 5-week feeding trial, the weight gain, specific growth rate, feed conversion ratio, protein efficiency ratio, and survival of the fish were not significantly affected by the experimental diets. However, feed intake was significantly lower (P<0.05) in the fish fed the G-2 diet compared with the control group. Hemoglobin, myeloperoxidase activity, cholesterol and HDL-cholesterol were not different between the dietary groups. However, hematocrit, nitroblue tetrazolium (NBT) activity, and lysozyme activity were increased (P<0.05) with an increment of dietary FGP. Plasma triglyceride of the fish fed the G-0.5 diet was significantly lower than that of fish fed the control diet. The cumulative mortality was lower in the fish fed diets containing FGP compared with the control group in the challenge test except for the bacteria Edwardsiella tarda. The results in this study indicate that dietary supplementation of FGP can enhance the non-specific immune responses and disease resistance of olive flounder against V. anguillarum and S. iniae.

• Korean Journal of Food Science and Technology
• /
• v.39 no.3
• /
• pp.330-335
• /
• 2007

This study was performed to investigate the anti-diabetic mechanism of crude polysaccharides isolated from the fruiting bodies of Grifola frondosa. We treated 3T3-L1 adipocyte cells to observe whether the crude polysaccharides isolated from Grifola frondosa would stimulate insulin sensitivity. Significant insulin sensitizing activity was observed in the 3T3-L1 adipocytes, and giving the crude polysaccharide of Grifola frondosa with 1 nM of insulin caused glucose uptake to increase to a similar level as giving 50 nM of insulin alone. To confirm the mechanism for the anti-diabetic effect of the crude polysaccharides, we performed further examinations within $KK-A^{y}$ mice, an animal model of type 2 diabetes. The crude polysaccharides reduced blood glucose levels in the $KK-A^{y}$ mice for 2 weeks after feeding, and also significantly lowered plasma insulin levels. These results suggest that the anti-diabetic mechanism of the crude polysaccharide of Grifola frondosa is related to the enhancement of insulin sensitivity.

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.525-531
• /
• 2011

This study was conducted to examine the contents of lead (Pb), cadmium (Cd), arsenic (As), and mercury (Hg) in meat and meat products in Korea. The contents of Pb, Cd, As, and Hg in 466 samples of beef, pork, chicken, duck, ham, and sausage were measured using inductively coupled plasma mass spectrometry or a mercury analyzer. Wet ashing and microwave method were compared, and the recovery and reproducibility of the microwave method were better than those of wet ashing for meat and meat products. The recovery of the microwave method was 98.1% for Pb, 104.6% for Cd, and 103.4% for As, respectively. The best result was obtained through digestion using an acid mixture ($HNO_3$/$H_2O_2$, 6:2). Hg content was measured using a mercury analyzer. As a result, the contents of Hg and Cd in samples were lower than those of Pb and As. The average contents of Pb were 0.009 mg/kg in beef, 0.010 mg/kg in pork, 0.006 mg/kg in chicken, 0.007 mg/kg in duck, 0.005 mg/kg in ham, and 0.009 mg/kg in sausage. The average Cd contents were 0.0004 mg/kg in beef, 0.0004 mg/kg in pork, 0.0005 mg/kg in chicken, 0.0012 mg/kg in duck, 0.0015 mg/kg in ham, and 0.0019 mg/kg in sausage. The average As contents were 0.016 mg/kg in beef, 0.004 mg/kg in pork, 0.021 mg/kg in chicken, 0.010 mg/kg in duck, 0.014 mg/kg in ham, and 0.018 mg/kg in sausage. The average Hg contents were 0.713 ${\mu}g/kg$ in beef, 0.902 ${\mu}g/kg$ in pork, 0.710 ${\mu}g/kg$ in chicken, 0.796 ${\mu}g/kg$ in duck, 1.141 ${\mu}g/kg$ in ham, and 1.052 ${\mu}g/kg$ in sausage. Based on the results of the National Health and Nutrition Survey 2005, the levels of dietary exposure to heavy metal contaminants in meat and meat products were compared with the provisional tolerable weekly intake(PTWI) established by the Joint FAO/WHO Expert Committee on Food Additives. The average dietary exposure of the general population from meat and meat products was 0.03-0.2% of PTWI for Pb, Cd, As, and Hg, which indicates a safe level for public health at present.

• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.243-248
• /
• 2011

A selective determination method of mercury (II) ion in aqueous solution by luminol-based chemiluminescence system (luminol CL system) has been developed. Determination of metal ions such as copper (II), iron (III), chromium (III) ion in solution by the luminol CL system using its catalytic role in the reaction of luminol and hydrogen peroxide has been reported by several groups. In this study, the catalytic activity of mercury (II) ion in the reaction of luminol and hydrogen peroxide was observed by the enhanced CL intensity of the luminol CL system. Based on this phenomenon, experimental conditions of the luminol CL system were investigated and optimized to determine mercury (II) ion in aqueous solution. While mercury (II) ion in mixed sample solution containing mercury (I) and (II) ions highly enhanced the CL intensity of the luminol CL system, the mercury (I) ion could not enhanced the CL intensity. Thus selective determination of the mercury (II) ions in a mixture containing mercury (I) and (II) ions could be achieved. Each concentration of mercury (I) and (II) ions in aqueous solution can be obtained from the results of the CL method that give the concentration of only mercury (II) ion and the inductively coupled plasma (ICP) method that give the total concentration of mercury ions. On the optimized conditions, the calibration curve of mercury (II) ion was linear over the range from $1.25{\times}10^{-5}$ to $2.50{\times}10^{-3}M$ with correlation coefficient of 0.991. The detection limit of mercury (II) ion in aqueous solution was calculated to be $1.25{\times}10^{-7}M$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.5-10
• /
• 2012

In general, the fabrications of the LEDs with mesa structure are performed grown by MOCVD method. In order to etch and separate each chips, the LEDs are passed the RIE and scribing processes. The RIE process using plasma dry etching occur some problems such as defects, dislocations and the formation of dangling bond in surface result in decline of device characteristic. The SAG method has attracted considerable interest for the growth of high quality GaN epi layer on the sapphire substrate. In this paper, the SAG method was introduced for simplification and fabrication of the high quality epi layer. And we report that the size of selective area do not affect the characteristics of original LED. The diameter of SAG circle patterns were choose as 2500, 1000, 350, and 200 ${\mu}m$. The SAG-LEDs were measured to obtain the device characteristics using by SEM, EL and I-V. The main emission peaks of 2500, 1000, 350, and 200 ${\mu}m$ were 485, 480, 450, and 445 nm respectively. The chips of 350, 200 ${\mu}m$ diameter were observed non-uniform surface and resistance was higher than original LED, however, the chips of 2500, 1000 ${\mu}m$ diameter had uniform surface and current-voltage characteristics were better than small sizes. Therefore, we suggest that the suitable diameter which do not affect the characteristic of original LED is more than 1000 ${\mu}m$.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.90-93
• /
• 2010

Purpose: In our nuclear medicine department, we suggested AMC RBC labeling method improved by modifying a part of existing modified in-vitro method to raise the efficiency of $^{99m}Tc$-RBC labeling. However, it needs to be more additional time and efforts than existing modified in-vitro method because the AMC RBC labeling method has to carry out the centrifugal separation process for 3~5 minutes. Therefore, in this study, we conducted researches to aim to maintain stable labeling effects and supplement a problem about additional time by reducing rotating time when labeling $^{99m}Tc$-RBC. Materials and Methods: This research has been conducted the object of 30 patients who examined study using $^{99m}Tc$-RBC and agreed to this research at our hospital from May 2009 to September 2009. We made 4 blood samples which consisted of ACD 1 cc along with 5 cc blood from each patient and used the AMC RBC labeling method. At this moment, each labeling efficiency was calculated by different rotating time 5 min, 10 min, 15 min, and 20 min and then we compared differences. Results: As a result, When comparing the $^{99m}Tc$-RBC labeling method efficiency by using the AMC RBC labeling method which differents from rotating time, each labeling efficiency were $92.3{\pm}5.0%$ in 5 min, $95.9{\pm}5.0%$ in 10 min, $97.4{\pm}4.9%$ in 15 min and $97.7{\pm}4.8%$ in 20 min. We analyzed differences of the labeling efficiency from change of rotating time by using an one-way ANOVA and verified that in Duncan method. There was relatively efficiency low in 5min rotating time and no statistically significant change in over. Conclusions: When comparing a existing method, the AMC RBC labeling method which goes through the centrifugal separation process again offers more favorable condition to combine RBC with $^{99m}TcO4^-$ by eliminating an plasma ingredient. When using the modified in-vitro method, we have almost 20 min to rotate to acquire stable labeling efficiency. But, when using the AMC RBC labeling method, we acquire labeling efficiency well what we want within only 10 min to rotate. Decrease of rotating time can complement the AMC RBC labeling method which goes through the centrifugal separation process again and also provide more rapid study such as G-I bleeding study due to fast labeling.

• Electrical & Electronic Materials
• /
• v.12 no.7
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).