• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.109-112
• /
• 2006

A fluorine-doped diamond-like carbon (F-DLC) stamp which has high contact angle, high UV-transmittance and sufficient hardness, was fabricated using the following direct etching method: F-DLC is deposited on a quartz substrate using DC and RF magnetron sputtering, PMMA is spin coated and patterned using e-beam lithography and finally, $O_2$ plasma etching is performed to transfer the line patterns having 100 nm line width, 100 nm line space and 70 nm line depth on F-DLC. The optimum fluorine concentration was determined after performing several pre-experiments. The stamp was applied successfully to UV-NIL without being coated with an anti-adhesion layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.910-912
• /
• 2006

Barrier ribs in plasma display panels (PDPs) function to maintain the discharge space between the glass plates as well as to prevent optical cross-talking. The barrier ribs currently employed are typically $300{\mu}m$ pitch, $110{\sim}120{\mu}m$ in height, with upper and lower widths of $50{\mu}m$ and $80{\mu}m$, respectively. It has been reported that barrier ribs can be fabricated by screen-printing, sand blasting, etching and photolithographic processes. In this study, photosensitive barrier rib pastes were formulated and systematically evaluated in terms of photolithographic process variables such as printing, drying, UV exposure, development and sintering. It was found that the use of UV absorbent, polymerization inhibitor and surfactant were very effective in controlling the width uniformity of barrier ribs in the photolithographic method of barrier rib patterning.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.823-827
• /
• 2005

Barrier ribs in the plasma display panel (PDP) function to maintain the discharge space between the glass plates as well as to prevent optical crosstalk. Patterning of barrier ribs is one of unique processes for making PDP. Barrier ribs could be formed by screen-printing, sand blasting, etching, and photolithographic process. In this work photosensitive barrier rib pastes were prepared by incorporating binder polymer, solvent, functional monomers photoinitiator, and barrier rib powder of which surface was treated with fumed silica particles. Studies on the function of materials for the barrier rib paste were undertaken. After optimization of paste formulation and photolithographic process, it was applied to the photosensitive barrier rib green sheet and was found that photolithographic patterning of barrier ribs could be formed with good resolution up to $110{\mu}m$ height and $60{\mu}m$ width after sintering.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.93.2-93.2
• /
• 2012

Point Spread Function (PSF) is one of the most important optical characteristics for describing the performance of a telescope. And a concept of subpixelization is inevitable in evaluating the undersampled PSF (Shin and Sakurai 2009). Then, the internal structure of Yohkoh SXT CCD pixel is not uniform: For the top half of pixel area, the X-ray should pass a so-called gate structure where the charges are transferred to an output amplifier. This gate structure shows energy-dependent sensitivity (Tsuneta et al. 1991). For example, for Al-K (8.34 A) X-ray emission, the transmission of the polysilicon gate is about 0.9. Also, for the peak coronal response of the SXT thin filters, around 17 angstrom (0.729 keV), the transmission of the gate is about 0.6, falling off sharply towards longer wavelengths. It should be noted that this spectrally dependent non-uniform response of each CCD pixel will certainly have a noticeable effect on the properties of the PSF at longer wavelengths. Therefore, especially for analyzing the undersampled PSF of low energy source, a careful consideration of non-uniform internal pixel structure is required in determining the shape of the PSF core. The details on the effect of gate structure will be introduced in our presentation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.795-801
• /
• 2005

Eighteen Suffolk wether lambs (BW = 24 kg) were chronically exposed to temperatures of cold (2$^{\circ}C$) or warm (22$^{\circ}C$). The experimental design consisted of a 2${\times}$3 factorial with a single crossover of environment treatment. The sheep were closely shorn and were housed in individual metabolic crates in controlled environment rooms. Sheep consumed pelleted diets ad libitum, which consisted of mainly barley grain and brome grass, and diets contained 7, 11 or 14% crude protein (CP). Animals were catheterized via one jugular vein with a PVC catheter and received a single injection of 60-65 Ci of $^{14}$C]urea. Plasma urea-N (PUN), urinary urea (UU), and carbon specific radioactivity were measured. Urea metabolism was not affected by environment. Percent urea recycling and urea space clearance were highest (p<0.05) on the low nitrogen diet. Urea pool was increased (p<0.10) for the 14% CP diet. Both UU and PUN concentration were positively related (p<0.01) with diet CP content. Therefore, dietary CP content significantly influenced urea metabolism, however, cold exposure did not alter those parameters.

• Parasites, Hosts and Diseases
• /
• v.35 no.2
• /
• pp.135-138
• /
• 1997

This study was performed to observe intestinal patholoay ill early Infection by Centrocestus crnlctus. The flukes were in the lowermost part of the intfrvillous space of the duodenum and jejunum from 1 day to 7 days postinfection (PI). Thr stroma of villi around the young fluke was edematous and infiltrated by inflanlrllatory knells Luch as Iymphocytes, plasma cells and eosinophils. The crypt became mildly llyperplastic and villi were moderately atrophied at 4 days Pl. The intestinal lesion produced was confillrd to the areas around the fluke. The pathologic findings were not significarltly different between 1,000 and 5,000 metacercariae infection groups. It is suggested that the lesion should be produced by mechanical destruction of the fluke on the enteroepithelial cells.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.26-29
• /
• 2004

High density plasma fluorinated silicate glass (HDP FSG) is used as a gap fill film for metal-to-metal space because of many advantages. However, FSG films can cause critical problems such as bonding issue of top metal at package, metal contamination, metal peel-off, and so on. It is known that these problems are caused by fluorine penetration out of FSG film. To prevent it, FSG capping layers such like SRO (Silicon Rich Oxide) are needed. In this study, their characteristics and a capability to block fluorine penetration for various FSG capping layers are investigated. Normal stress and High stress due to denser film. While heat treatment to PETEOS caused lower blocking against fluorine penetration, it had insignificant effect on SiN. Compared with other layers, SRO using ARC chamber and SiN were shown a better performance to block fluorine penetration.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.6
• /
• pp.754-760
• /
• 1996

Effects of washing and additives on the texture of squid surimi gel which has been known to hard to gelation due to high protease activities and many water solubles were studied by SDS-PAGE, compression test, jelly strength and transmission electron microscopy analysis (TEM). Myosin (205 kDa) heavy chain was the major protein in water soluble fractions. It was impossible to make a gel after washing of the minced squid meat. These results suggested that squid (Todarodes pacificus) minced meat does not need a washing for good jelly products. $3.0\%$ of bovine plasma protein (BPP) produced the hardest gel ($16\%$ harder than the control) among the additives including egg white (EW), potato extracts (PE) and transglutaminase-K (TG-K) by compression test (P>0.05). Microstructure of control, $2\%$ EW and $4\%$ TG-K treated gels showed a sponge-like structure with more vacant space. Gels containing $3\%$ BPP formed the most rigid and arranged networks. Those results indicates that poor gel-network formation Was due to the degradation of myofibrillar proteins by proteases contained in the minced meat, which result in non-interlinkage.

• Applied Microscopy
• /
• v.24 no.2
• /
• pp.1-11
• /
• 1994

The book lung in the wolf spider, Pardosa astrigera was consisted of a series of flattened triangular-shaped air sacs, stacked with about 70 sheets, and was located in the ventrolateral region of opisthosoma. Each hemolymph spaces (average $8{\mu}m$ in thickness) surrounded by the air sacs (average $6{\mu}m$ in thickness). The air sacs was supported by cylindrical cuticular spikes of microfibril bundles. Epithelial cell processes surrounded the hemolymph spaces. The nuclei of the epithelial cells were concentrated near the atrium. In the middle portion of air sac, the epithelial cells formed pillars across the hemolymph spaces and spot desmosome and zonula adherens were seen between the plasma membranes. In the hemolymph space of this spider, granular hemocytes (average diameter $8{\mu}m$) were the most dominant type of hemocytes. In the medial sinus, the hemolymph flow between the air sacs of a paired book lungs and then flow out of the lung vein. The air comes in the atrium through the ventral lung slit and makes a tidal wave in and out of the air sacs.

• Rapid Communication in Photoscience
• /
• v.4 no.3
• /
• pp.54-58
• /
• 2015

Under the condition of femtosecond impulsive nonlinear optical irradiation, the bright and narrowed blue emission of silicon nanocrystal was observed. This synthetic method produced very small (~ 4 nm) oxide-capped silicon nanocrystal having probably ultra small emitting core (~ 1 nm) inferred from luminescence. By controlling the stirring condition, very high efficiencies of luminescence ( 4 fold higher) were obtained compared with the other conventional femtosecond laser fragmentation methods, which was attributed to the differences in hydration shell structure during the femtosecond laser induced irreversible phase transition reaction. When we properly adjusted the irradiation times of the white light continuum and stirring condition, very homogeneous luminescent silicon nanocrystal bands having relatively sharp lineshape were obtained, which can be attributable to the luminescent core site isolated and free from the surface defects.