• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.170-171
• /
• 2015

최근 고성능이며 유연하고 투명한 전자 기기의 제작에 대한 관심이 높아지고 있으며 이에 대한 연구가 많이 수행되고 있다. 유연 전자제품을 제작하기 위해서는 고성능의 전자소자를 스탬프를 이용해 모재에서 유연한 기판으로 옮겨 붙이는 전사공정이 필요하다. 성공적인 전사공정을 수행하기 위해 스탬프 표면의 점착력을 제어하는 것이 중요하며, 이를 위해 다양한 표면 패터닝 및 표면처리 방법이 연구되고 있다. 대기압 플라즈마 표면처리는 공정 과정이 단순하여 대면적 연속적 전사 장비에 적용하기에 적합한 표면처리 공정으로, 본 연구에서는 대기압 플라즈마 표면 처리된 스탬프의 점착특성을 조사하고, 표면 처리된 스탬프를 이용하여 전자소자의 전사여부를 확인하는 실험을 수행하였다. 플라즈마 처리되지 않은 스탬프 표면은 높은 접착력을 가지며, 이를 이용하여 전자소자를 모재에서 떼어낼 수 있었다. 반면에 스탬프에 대기압 플라즈마 표면처리를 하면 실리카 재질의 경화층이 형성되며 이 층에 의해 점착력이 감소하여 전자소자를 모재에서 떼어낼 수 없었다. 따라서 스탬프에 대기압 플라즈마 표면처리를 함으로써 스탬프와 전자소자 사이의 점착력을 변화시킬 수 있으며, 이를 이용하면 선택적 전사가 가능함을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3362-3366
• /
• 2013

A simple and quick separation technique for selenite in natural water was developed using $TiO_2$@$SiO_2/Fe_3O_4$ nanoparticles. For the synthesis of nanoparticles, a polymer-assisted sol-gel method using hydroxypropyl cellulose (HPC) was developed to control particle dispersion in the synthetic procedure. In addition, titanium butoxide (TBT) precursor, instead of the typical titanium tetra isopropoxide, was used for the formation of the $TiO_2$ shell. The synthesized nanoparticles were used to separate selenite ($Se^{4+}$) in the presence of $Se^{6+}$ or selenium anions for the photocatalytic reduction to $Se^0$ atom on the $TiO_2$ shell, followed by magnetic separation using $Fe_3O_4$ nanoparticles. The reduction efficiency of the photocatalytic reaction was 81.4% at a UV power of 6W for 3 h with a dark adsorption of 17.5% to the nanoparticles, as determined by inductively coupled plasma-mass spectrometry (ICP-MS). The developed separation method can be used for the speciation and preconcentration of selenium cations in environmental and biological analysis.

• Korean Journal of Community Nutrition
• /
• v.8 no.6
• /
• pp.986-992
• /
• 2003

This study was performed to investigate the effects of a levan diet on the body fat accumulation and serum lipid composition of 29 Korean women over a period of up to 12 weeks (n=13 for the control group, n=16 for the levan group). The subjects ate an uncooked diet (6 g) with 400$m\ell$ of tap water twice a day. The mean body weight and height measurements of the subjects (levan group) at the outset were 66.0$\pm$8.8kg and 156.7$\pm$5.3cm, respectively. The subjects showed a significant reduction in weight, body fat mass, anthropometric measurements and skinfold thickness during the experimental period. The waist hip ratio (WHR) was 0.88$\pm$0.03 at the outset, and fell to 0.82$\pm$0.05 after 4 weeks. The intake of levan was also influenced on the levels of serum Fe, leptin, lipoprotein lipase, HDL-cholesterol, LDL-cholesterol, and triglyceride. The serum glucose levels were within the normal range during the experimental period. The initial serum triglyceride level was 121mg/dl, but fell to 103mg/dl after 4 weeks of levan supplementation. The current study demonstrates that a levan diet is effective in controlling weight, body fat, HDL-cholesterol, LDL-cholesterol, and triglyceride levels.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1511-1514
• /
• 2009

Organic light emitting layer in OLED device was formed by gravure printing process in this work. Organic surface coated by gravure printing typically showed relatively bad uniformity. Thickness and roughness control was characterized by applying various mixed solvents in this work. Poly (N-vinyl carbazole) (PVK) and fact-tris(2-phenylpyridine)iridium($Ir(ppy)_3$) are host dopant system materials. PVK was used as a host and Ir(ppy)3 as green-emitting dopant. To luminance efficiency of the plasma treatment on etched ITO glass and then PEDOT:PSS spin coated. The device layer structure of OLED devices is as follow Glass/ITO/PEDOT:PSS/PVK+Ir(ppy)3-Active layer /LiF/Al. It was printed by gravure printing technology for polymer light emitting diode (PLED). To control the thickness multi-printing technique was applied. As the number of the printing was increased the thickness enhancement was increased. To control the roughness of organic layer film, thermal annealing process was applied. The annealing temperature was varied from room temperature, $40^{\circ}C$, $80^{\circ}C$, to $120^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1720-1723
• /
• 2000

Boron doped conducting diamond thin film were grown on Si substrate by microwave plasma chemical vapor deposition from a gaseous feed of hydrogen, acetone/methanol and solid boron. The doping level of boron was controlled from 0ppm to $10^4$ppm (B/C). The Si substrate was tilted ca. 10$^{\circ}$ to make Si substrate have different height and temperature. Experimental results show that same condition but different temperature of Si substrate by height made different crystalline of diamond thin film. There were appeared 3$\sim$4 step of different crystalline morphology of diamond. To characterize the boron-doped diamond thin film, Raman spectroscopy was used for identification of crystallinity. To survey surface morphology, microscope was used. Grain size was changed gradually by different temperature due to different height. The Raman spectrum of film exhibited a sharp peak at 1334$cm^{-1}$, which is characteristic of crystalline diamond. The lower position of diamond film position, the more non-diamond component peak appeared near 1550$cm^{-1}$.

• Journal of the Korean Chemical Society
• /
• v.53 no.3
• /
• pp.279-285
• /
• 2009

This paper has described about preparation of $Zr^{4+}$ affinity column based on the poly(styrene-co- gly-cidyl methacrylate) prepared by emulsion polymerization of styrene and glycidyl methacrylate in order to isolate phosphopeptide. The $Zr^{4+}$ ions were introduced after the phophonation of an epoxy group on polymeric microspheres. The successful preparation of $Zr^{4+}$-immobilized polymeric microsphere stationary phase was confirmed through Fourier transform infrared spectra, optical microscopy, scanning electron microscopy, X-ray photoelectron spectra and inductively coupled plasma-atomic emission spectrometer. The separation efficiency for $Zr^{4+}$ affinity column prepared by slurry packing was tested to phosphonated casein and dephosphonated casein. The resolution time (min) of the phosphonated casein was higher than that of dephosphated casein for $Zr^{4+}$ affinity polymeric microsphere by liquid chromatography. This $Zr^{4+}$ affinity column can be used for isolation of phosphonated casein from casein using liquid chromatography.

• Journal of Sensor Science and Technology
• /
• v.25 no.6
• /
• pp.435-439
• /
• 2016

We report a novel detection technology for glycated hemoglobin (HbA1c) that is measured primarily to identify the three-month average plasma glucose concentration. In enzymatic measuring of glycated hemoglobin, the generated hydrogen peroxide was then used as a reducing agent of gold (III) for the synthesis of gold (0). Gold nanoparticles obtained from this novel approach were measured by optical and piezoelectric methods. In optical method, we have developed polymer based film-type sensor cartridge filled with all the reagents for glycated hemoglobin analysis and the cartridge worked very well having the detection limit of 0.53% of glycated hemoglobin. On the other hand, quartz crystal microbalance (QCM) sensors also have been developed to determine the abilities of surface modified QCM sensors at various levels of the concentration of glycated hemoglobin to bind gold nanoparticles and limit of detection was 0.90%. Finally, despite of relatively lower sensitivities of QCM sensor and film-type optical sensor than well-plate based optical detection, these two sensors were available to measure the glycated hemoglobin level for diabetes patients and normal person.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.91-91
• /
• 2000

a-C:H 혹은 a-SiC:H 박막은 광전소자 및 태양전지 등의 개발에 있어서 중요한 물질이다. 우리는 a-C:H 및 a-SiC:H 박막을 PECVD (plasma-enhanced chemical vapor deposition) 방법으로 증착시키고, 박막의 가열에 따른 스핀밀도의 변화를 ESR (electron spin resonance) 측정을 통하여 조사하였다. PECVD 증착가스는 Ch4, SiH4 가스를 사용하였고, 기판은 Corning 1737glass를 사용하였으며, 기판 온도는 300-40$0^{\circ}C$, 증착 압력은 0.1-0.3 Torr, r.f. 전력은 3-36W 사이에서 변화되었다. ESR 측정은 상온 X-band 영역에서 수행되었고, modulation amplitude는 2.5G, modulation frequency는 100kHz 이었다. a-C:H 혹은 a-SiC:H 박막은 진공상태의 reactor, 혹은 공기중의 furnace 안에서 300-50$0^{\circ}C$ 영역에서 3-8시간 정도 가열되거나, 혹은 상온에서 약 50$0^{\circ}C$ 정도까지 단계적으로 가열되었다. 증착된 a-C:H 박막의 초기 구조는 Raman 측정으로부터 polymer-like Carbon으로 추정되었으며, 300-35$0^{\circ}C$ 가열시 초기 1시간 정도 사이에는 스핀밀도가 증가되었으나, 그 후 8시간 정도까지의 가열의 경우에도 대체로 동일하게 나타났다. 또한 상온으로부터 약 50$0^{\circ}C$까지 단계적으로 온도를 높여주며, 각 단계마다 1시간씩 가열했을 때도 30$0^{\circ}C$ 정도까지는 스핀밀도가 증가하다가 더 높은 온도로 가면서 다시 스핀밀도가 감소함을 볼 수 있었다. 이러한 스핀밀도의 초기 증가 및 감소를 일으키는 메카니즘에 대해서 논의해 볼 것이다.

• Journal of Powder Materials
• /
• v.26 no.5
• /
• pp.383-388
• /
• 2019

To improve the mechanical properties of aluminum, graphene has been used as a reinforcing material, yielding graphene-reinforced aluminum matrix composites (GRAMCs). Dispersion of graphene materials is an important factor that affects the properties of GRAMCs, which are mainly manufactured by mechanical mixing methods such as ball milling. However, the use of only mechanical mixing process is limited to achieve homogeneous dispersion of graphene. To overcome this problem, in this study, we have prepared composite materials by coating aluminum particles with graphene by a self-assembly reaction using poly vinylalcohol and ethylene diamine as coupling agents. The scanning electron microscopy and Fourier-transform infrared spectroscopy results confirm the coating of graphene on the Al surface. Bulk density of the sintered composites by spark plasma sintering achieved a relative density of over 99% up to 0.5 wt.% graphene oxide content.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.656-662
• /
• 2007

Fuel reformer using plasma and shift reactor for CO oxidation were designed and manufactured as $H_2$ supply device to operate a polymer electrolyte membrane fuel cell (PEMFC). $H_2$ selectivity was increased by non-thermal plasma reformer using GlidArc discharge with Ni catalyst simultaneously. Shift reactor was consisted of steam generator, low temperature shifter, high temperature shifter and preferential oxidation reactor. Parametric screening studies of fuel reformer were conducted, in which there were the variations of the catalyst temperature, gas component ratio, total gas ratio and input power. and parametric screening studies of shift reactor were conducted, in which there were the variations of the air flow rate, stema flow rate and temperature. When the $O_2/C$ ratio was 0.64, total gas flow rate was 14.2 l/min, catalytic reactor temperature was $672^{\circ}C$ and input power 1.1 kJ/L, the production of $H_2$ was maximized 41.1%. And $CH_4$ conversion rate, $H_2$ yield and reformer energy density were 88.7%, 54% and 35.2% respectively. When the $O_2/C$ ratio was 0.3 in the PrOx reactor, steam flow ratio was 2.8 in the HTS, and temperature were 475, 314, 260, $235^{\circ}C$ in the HTS, LTS, PrOx, the conversion of CO was optimized conditions of shift reactor using simulated reformate gas. Preheat time of the reactor using plasma was 30 min, component of reformed gas from shift reactor were $H_2$ 38%, CO<10 ppm, $N_2$ 36%, $CO_2$ 21% and $CH_4$ 4%.