• 한국CDE학회논문집
• /
• 제20권4호
• /
• pp.420-430
• /
• 2015

Operator Training Simulators (OTSs) provide macroscopic training environment for plant operation. They are equipped with simulation systems for the emulation of remote monitoring and controlling operations. OTSs typically provide 2D block diagram-based graphic user interface (GUI) and connect to process simulation tools. However, process modeling for OTSs is a difficult task. Furthermore, conventional OTSs do not provide real plant field information since they are based on 2D human machine interface (HMI). In order to overcome the limitation of OTSs, we propose a new type of plant training system. This system has the capability required for collaborative training between operators and field workers. In addition, the system provides 3D virtual training environment such that field workers feel like they are in real plant site. For this, we designed system architecture and developed essential functions for the system. For the verification of the proposed system design, we implemented a prototype training system and performed experiments of collaborative training between one operator and two field workers with the prototype system.

• 한국가스학회지
• /
• 제23권5호
• /
• pp.44-51
• /
• 2019

플랜트 안전훈련을 가상환경 하에서 진행하는 시스템을 구축하였을 때 고려해야 하는 시스템 구성요소와 구현 방법을 플랜트 특징에 따라서 구분하였다. VR기반의 안전훈련 시스템을 구성할 때 플랜트 특징에 따라서 필요한 구성요소가 다를 수 있으며, 대상 플랜트에 따라서 구축하는 기본적인 시스템 구성요소를 제시하였다. 제시하는 시스템의 구성을 뒷받침하기 위해서 비교적 간단한 설비인 도시가스 정압기 안전훈련 시스템을 구현하였고, 보다 복잡하고 큰 규모의 플랜트를 설명하기 위해서 석유화학 플랜트의 안전훈련 시스템 구현을 예로 들었다. 이를 통해서 적용하고자 하는 플랜트에서 적절한 VR 기반 플랜트 안전훈련 시스템 구성의 가이드라인을 제시한다.

• 한국가스학회지
• /
• 제21권1호
• /
• pp.34-42
• /
• 2017

도시가스 정압기 안전 운영을 위한 운전원 안전훈련시스템의 주요 구성 요소 중 하나인 안전훈련 시나리오를 설계하고 구현함에 있어서, 단일 시나리오가 일방적으로 진행되는 기존 훈련 방식을 개선한 훈련 방안을 연구하였다. 안전훈련시스템과 운전원간의 상호 작용을 통해 훈련 시나리오의 다양성을 향상시켜 훈련 효과를 올리는 방안으로 플랜트 안전훈련 플랫폼 상에서 적용 가능한 Finite State Machine 모델 기반의 인터랙티브 훈련 방안을 개발하였다. 본 훈련 시나리오 시스템으로 인해 향후 확장된 대상 플랜트에의 안전훈련시스템 적용 가능성을 기대해볼 수 있었다.

• 한국가스학회지
• /
• 제23권2호
• /
• pp.55-60
• /
• 2019

가상현실 기술을 이용한 플랜트 안전훈련 시스템 개발을 위해서 대규모 플랜트를 대상으로 훈련 시스템을 구성하였다. 소규모 플랜트 또는 단위장치의 안전훈련에 비해서 가상 플랜트 구현, 공정 내 데이터 처리, 작업 지시 등 많은 시스템 구성이 필요하며 이들에 대한 통합 시스템 작업을 진행 하였다. 대상 플랜트인 RDS 공정은 고온 고압의 위험도가 높은 공정으로 해당 범위에서 누출로 인한 화재가 발생할 경우에 조치할 수 있는 훈련 시나리오를 고려하였으며 실제 사용 중인 운전 정지 절차를 참조하였다. 제안한 안전훈련 통합 시스템은 RDS 공정에서 일어날 수 있는 유사 상황에서도 이용 가능하며 대규모 플랜트에서의 가상현실을 이용한 안전훈련의 새로운 플랫폼으로 고려될 수 있다.

• 시스템엔지니어링학술지
• /
• 제14권1호
• /
• pp.28-35
• /
• 2018

Front End Engineering Design (FEED), currently dominated by a few advanced countries, creates the highest added-value in the in plant construction industry. In the domestic plant engineering industry, it is difficult to acquire its own technology capability and experience due to lack of experience and shortage of experts in advanced design fields such as basic design and FEED. To achieve competitiveness with the advanced countries, it is necessary to establish smart training system for advanced plant design and FEED engineers. This study aims to design an integrated training framework for plant engineering and FEED using system engineering to build a smart plant engineering education system that learns design knowledge based on educational content and experience based on design stage for chemical plant.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.179-182
• /
• 1997

In a training simulator for power plant, operator's action in the MCR(Main Control Room) are given to plant process and computer system model as an inputs, and the same response as in real power plant is provided in real time. Inter-process communication and synchronization are especially important among various inputs. In the plant simulator, to simulate the digital control system such as FOXBORO SPEC-200 Micro control system, modification and adaptation of control card(CCC) and its continuous display station(CDS) is necessary. This paper describes the modeling and simulation of FOXBORO SPEC-200 Micro control system applied to Younggwang nuclear power plant unit #3 & 4, and its integration process to the full-scope replica type training simulator. In a simulator, display station like CDS of FOXBORO SPEC-200 Micro control system is classified as ITI(Intelligent Type Instrument), which has a micro processor inside to process information and the corresponding alphanumeric display, and the stimulation of ITI limits the important functions in a training simulator such as backtrack, replay, freeze and IC reset. Therefore, to achieve the better performance of the simulator, modification of CDS and special firmware is developed to simulate the FOXBORO SPEC-200 Micro control system. Each control function inside control card is modeled and simulated in generic approach to accept the plant data and control parameter conveniently, and debugging algorithms are applied for massive coding developed in short period.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1392-1394
• /
• 2003

This paper presents the actual test data of 3 phase, 9 pole, 3.6 [kw] synchronized wind-power generator controlled by hinged vane system and the possibilities of the small mount wind-power generations at the south-east coast of Ul-san. It also shows the data of the wind-velocity acquired by wind-direction sensor, calculation and analysis of the estimated electrical generation power, energy storage systems, and the efficient usages of the wind-power system.

• 대한인간공학회지
• /
• 제32권1호
• /
• pp.107-115
• /
• 2013

Objective: The aim of this study is to identify the training requirements of new nuclear power plant by a comprehensive literature review. Background: The design of instrumental and control systems for New NPP is applied fully digitalized systems. For example, soft-control, large display panels(LDP), and an advanced alarm system were applied to the APR-1400 or SMART. Method: The NUREG-0711 and international guideline of training program was analyzed from the following four phases of SAT(Systemic Approach to Training): Analysis, Design, Development, Implementation and Evaluation. Results: To identify the requirement of training program, 'Feedback' phase was considered and each phase of SAT was classified. Conclusion: A more systematic requirement of training program is needed which considers the computerized system was applied to the new NPP. Application: The results of the publishing can be useful for standardization of the systematic training program for the operators of NPP.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.551-560
• /
• 1998

This paper presents a neural network model representing complex hydro-thermo-dynamic characteristics of a steam generator in nuclear power plants. The key modeling processes include training data gathering process, analysis of system dynamics and determining of the neural network structure, training process, and the final process for validation of the trained model. In this paper, we suggest a training data gathering method from an unstable steam generator so that the data sufficiently represent the dynamic characteristics of the plant over a wide operating range. In addition, we define the inputs and outputs of neural network model by analyzing the system dimension, relative degree, and inputs/outputs of the plant. Several types of neural networks are applied to the modeling and training process. The trained networks are verified by using a class of test data, and their performances are discussed.

• Current Research on Agriculture and Life Sciences
• /
• 제14권
• /
• pp.61-65
• /
• 1996

네트멜론에 있어서, 주당(株當) 엽수(葉數)를 22매(枚)로 제한하여 8, 10, 12, 14절의 1과착과와 8-9, 10-11, 12-13, 14-15절의 2과 착과구를 설치하고 각각 네트 발현(發現), 품질(品質) 및 수량(收量)에 미치는 영향(影響)이 어떠한지 알고자 '슈퍼VIP' 멜론을 이용하여 비닐하우스 내에서 춘작재배(春作栽培)로 시험하여 다음과 같은 결과(結果)를 얻었다. 1) 주당(株當) 1과(果) 착과(着果)는 착과절위(着果節位)에 관계없이 네트발현이 양호하였으며, 착과절위(着果節位)가 높을수록 과중(果重), 과장(果長), 과경(果徑), 과육(果肉)두께가 증가되었고, 당도(糖度)와 저장성(貯藏性)은 떨어졌다. 2) 주당(株當) 2과(果) 착과(着果)는 착과절위(着果節位)가 높을수록 네트 발현(發現)이 우수하였고, 당도(糖度), 과중(果重), 과장(果長), 과경(果徑), 과육(果肉)두께가 증가하였으나, 저장성(貯藏性)은 차이(差異)를 보이지 않았다. 3) 네트발현, 당도 저장성등 상품성(商品性)은 주당(株當) 1과(果) 착과(着果)가 2과(果) 착과(着果) 보다 뛰어났으며, 12절(節)에서 1과(果) 착과(着果)한 것이 가장 우수했다. 4) 수량성(收量性)은 주당(株當) 2과(果) 착과(着果)가 1과(果) 착과(着果)보다 증가(增加)하였다.