• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.41-48
• /
• 1995

In former times the protection of our environment didn't play an important role due to the fact that emissions and effluents were not considered as serious impacts. However, opinions and scientific measurements meanwhile confirmed that the impacts are more serious than expected. Thus measures to protect our earth has to be taken into consideration. A part of these measures in the Environmental Impact Assessment (EIA). One of the most important parts of the EIA is the collection of basic datas and the following evaluation. Experience out of the daily business of Gerling Consulting Group shows that the content of the EIA has to be revised and enlarged in certain fields. The historical development demonstrated that in areas in which the population and the industrial activities reached high concentration there is a high necessity to develop strict environmental laws and regulations. Maximum values of the concentration of hazardous materials were fixed concerning the emission into and water. Companies not following these regulations were punished. The total amount of environmental offences increased rapidly during the last decade, at least in Germany. During this development the public consciousness concerning environmental affairs increased as well in the industrialized countries. But it could clearly be seen that the development in the field of environmental protection went into the wrong direction. The technologies to protect the environment became more and more sophisticated and terms as: "state of the art" guided more and more to lower emissions, Filtertechnologies and wastewater treatment for example reached a high technical level-but all these sophisticated technologies has one and the same characteristic: they were end-of-the pipe solutions. A second effect was that this kind of environmental protection costs a lot of money. High investments are necessary to reduce the dust emission by another ppm! Could this be the correct way? In Germany the discussion started that the environmental laws reduce the attractivity to invest or to enlarge existing investments within the country. Other countries seem to be not so strict with controlling the environmental laws which means it's simply cheaper to produce in Portugal or Greece. Everybody however knows that this is not the correct way and does not solve the environmental problems. Meanwhile the general picture changes a little bit and we think it changes into the correct direction "End-of-the-pipe" solutions are still necessary but this word received a real negative touch and nobody wants to be brought into connection with this word received a real negative touch and nobody wants to be brought into connection with this word especially in connection with environmental management and safety. Modern actual environmental management starts in a different way. Thoughts about emissions start in the very beginning of the production, they start with the design of the product and modification of traditional modes of production. Basis of these ideas are detailed analyses of products and processes. Due to the above mentioned facts that the public environmental consciousness changed dramatically a continous environmental improvement of each single production plant has to be guarantied. This question is already an important question of the EIA. But it was never really checked in a wholistic approach. Environmental risks have to be taken into considerations during the execution of an EIA. This means that the environmental risks have to be reduced down to a capable risk-level. Environmental risks have to be considered within the phase of planning, during the operation of a plant and after shut down. The experience shows that most of the environmental relevant accidents were and caused by human fault. Even in highly protected plants the human risk-factor can not be excluded during evaluation of the risk-potential. Thus the approach of an EIA has to regard technical evaluations as well as organizational thoughts and the human factor. An environmental risk is a threat to the environment. An analysis of the risk concerning the organizational and human aspect however never was properly executed during an EIA. A possible solution could be to use an instrument as the actual EMAS (Environmental Management System) of the EC for more accurate evaluation of the impact to the environment during an EIA. Organizations or investors could demonstrate by an approved EMAS or even by showing their installment of EMAS that not only the technical level of the planned investment meets the requested standards but as well the actual or planned management is able to reduce the environmental impact down to a bearable level.

• Current Research on Agriculture and Life Sciences
• /
• v.11
• /
• pp.61-70
• /
• 1993

We investigated the effects of shading on the plant growth, flowering and the bulbil formation of Lilium species. As the shading treatment, we used full sunlight and various light intensity, 30%, 50%, 75%, 90% compared to full sunlight with shading net. The results obtained were as follows. The flowering rate and flower number of 'Roma' and 'Georgia' were not effected by various shading treatment. Days to flower in 'Roma' and Tiger lily showed similiar tendency like this. One of the shading effect was stem elongation of 'Connecticut king' markedly reduced compared with other cultivars in flowering rate and flower number. Leaf number of all cultivars was not consistent in tendency. But leaf number of Tiger lily and 'Connecticut king' reduced. The tendency of other experimented Lilium species weren't consistent. Bract leaf number reduced gradually as shading rate increased, plant height and internode length increased. Especially the height of 'Georgia' showed eminant increase compared with others. Total number and weight of bulbil of 'Enchantment' and Tiger lily reduced as shading rate increased.. But bulbil weight from bract part of 'Enchantment' in creased. The bulbils of 'Connecticut King' and 'Roma' appeared only on upper stem parts when treated serious shaded conditions, 75% and 90%. Only 'Connecticut King' and 'Enchantment' showed leaf emergence from bulbil among the L. elegans species.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.359-365
• /
• 2013

Chrysanthemum is one of the most popular ornamental plants worldwide. Recently, lots of new and novel chrysanthemum varieties have been developed using mutagenesis. However, there was no study for comparison of tissue culture condition among the mutant varieties derived from one original variety, until now. This study was conducted to compare the efficient regeneration condition of the two chrysanthemum mutant varieties, 'ARTI-purple' and 'ARTI-queen'. Two different flower parts (disk and ray florets) at the unopened and early blooming stages were used for comparison of regeneration condition on MS medium supplemented with combinations of three growth regulators (BA, NAA, and IAA). The highest regeneration rate was identified on the NAA and BA combination when the disk florets at unopened blooming stage are used. The best optimum combinations of growth regulators were identified as NAA $1.0mg{\cdot}L^{-1}$ and BA $0.5mg{\cdot}L^{-1}$ at 'ARTI-purple', which displayed 47.9% regeneration. However, regeneration of 'ARTI-queen' was the highest as 25.6% at NAA $2.0mg{\cdot}L^{-1}$ and BA $1.0mg{\cdot}L^{-1}$. There results indicate that there is a difference for the optimum regeneration condition between the mutant varieties derived from one original variety. These results will be useful for construction of efficient regeneration system of diverse chrysanthemum mutants developed by mutation breeding.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.6
• /
• pp.413-420
• /
• 2001

To prevent salt accumulation in cut-flower rose soil through proper nutrient management, the optimum concentration of nitrogen and potassium for fertigation was investigated. For the purpose, 'Noblesse' cut-flower roses was transplanted to a sandy loam soil in a plastic house and four nutrient levels (0, 25, 50 and $100mg\;l^{-1}$) of N and K separately were applied by drip-irrigation under -20 kPa of soil moisture tension. The growth and yield responses were assessed in terms of the length, weight and number of cut-flower roses, and the nutrient availability absorbed by plant. The length of cut-flowers was not affected by N concentration, but the weight and number of cut-flowers were greatest at $50mg\;N\;l^{-1}$. For K, the length and weight of cut-flowers were greatest at 25 and $50mg\;l^{-1}$, but the number of cut-flowers were remarkably great at $50mg\;l^{-1}$. Despite of increase of N and K fertigation concentration ranged from 25 to $100mg\;l^{-1}$, there was not significant difference between the uptake concentration of plant parts. As a result, the availability of N and K in $50mg\;l^{-1}$ fertigation was highest when compared to other fertigation concentrations, while the remaining amounts of N and K to soil was very low. The results of this study suggested that N and K concentrations of $50mg\;l^{-1}$ would be adequate for the fertigation of 'Noblesse' cut-flower rose.

• Research in Plant Disease
• /
• v.10 no.4
• /
• pp.241-247
• /
• 2004

Recently, we reported a satellite RNA (Paf-satRNA) which is encapsidated in a pepper isolate of Cucumber mosaic virus (CMV-Paf) regulated symptom attenuation of the helper virus. To characterize mild symptom domain of Paf-satRNA, a series of chimeric cDNAs of satRNAs were created by using full-length cDNA clones of Paf-satRNA and a Pep-satRNA, chlorosis-inducing satRNA in pepper plants, and analyzed for determinants of symptom attenuation. When compared the nucleotide sequences, the 3' and 5' terminal sequences of the two wild-type (wt) satRNAs contained relatively conserved sequences which are the typical to CMV satRNA. Ten bases insertions were found in PepY-satRNA, and two variable regions, 81st to 113th and 183rd to 265th from the 5'-end, were located in the middle parts of the satRNAs. To delineate the attenuated symptom-related domain for the Paf-satRNA, in vitro transcripts RNAs transcribed from the wt cDNAs and constructed chimeric cDNAs were combined with genomic RNAs, RNA1, RNA2 and RNA3, of CMV-Fny and inoculated onto Nicotiana benthamiana plants. These transcripts were fully infectious onto the N. benthamiana and infectivity was confirmed by the RT-PCR. Chimeric Paf(H/N)-satRNA and PepY(N/A)-satRNA as well as Paf-satRNA induced very mild mosaic or symptomless infection on N. benthamiana. By contrast, typical mosaic symptom and stunting of infected plants were induced when PepY-satRNA, PepY(H/N)-satRNA and Paf(N/A)-satRNA were infected to N. benthamiana. Paf-satRNA coinfected with CMV-Fny RNAs induced very mild to sympomless on pepper plants whereas PepY-satRNA-infected pepper expressed typical chlorosis mosaic symptom. Two kinds of chimeric mutants, Paf(H/N)-satRNA and PepY(N/A)-satRNA, induced mild mosaic or symptomless infection onto pepper plants, while PepY(H/N)-satRNA and Paf(N/A)-satRNA showed typical chlorosis and mosaic symptom with stunting. This results suggest that mild symptom-related domain for the Paf-satRNA was located on HpaI-NarI region.

• Journal of Wetlands Research
• /
• v.11 no.3
• /
• pp.49-59
• /
• 2009

Seasonal changes of the growth characteristics and biomass of Scirpus fluviatilis, a aquatic emergent vascular plant, were investigated to reveal the phenology and the population dynamics and to provide the fundamental resources for the restoration counterplan of the wetland vegetation in the littoral zone of the Upo wetland, Changnyeong-gun, Gyeongsangnam-do, Korea from March 2006 to November 2006. Scirpus fluviatilis was distributed commonly in Upo, Mokpo, Sajipo, Jokjibyeol, and Topyeongcheon upstream and downstream of Upo wetland, and the density was highest in Mokpo. Distribution range for the water depth was 9~49cm, and the highest shoot density in 26~49cm, and the mean shoot density was $119/m^2$, and the mean shoot length was 122.3cm on May 28. The number of the tuber was $104.5/0.25m^2$, and the living tubers were 84.2%. The mean fresh biomass of the living tubers was 3.0g, and those of 1~4g was most as 57.9%. Germination rates of the living tubers was 43.8%, and the maximum rate was in 7~9g and more than 10g. In the pot cultivation, the shoot density of the germinated tubers and the dormant tubers were highest as 13.5 and 9.7, respectively in early August. In the field study, the shoot density had few change before typhoon damage, while the density increased abruptly in November after flooding accompanied with the typhoon 'Ewiniar'. The shoot length in the pot cultivation and in the field study were 100~116cm and 60~170cm, respectively in the growth-end. Biomass allocation rates into the stem, leaf, flower, and underground parts were 8.9%, 6.6%, 0%, and 84.5%, respectively in the pot cultivation of the germinated tubers, and those of the dormant tubers were 7.1%, 7.1%, 0%, and 85.8%, respectively. The tuber number increased to 1.4~4.1 times by the growth-end, so it is concluded that Scirpus fluviatilis is mostly propagated by the vegetative reproduction.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.142-150
• /
• 1994

To investigate differences in Cd and Zn contents of paddy soils and rice plants polluted by the municipal and industrial waste water in the Mangyeong River Area, soil and plant samples were collected at several distances from the main inlet and at different depths of the soil. Soil samples were extracted with $4M-HNO_3$ and plant samples were digested with a mixture of $HNO_3$and $HClO_4$for analyzing heavy metals by atomic absorption spectrophotometry. The contents of Cd and Zn in soils ranged from 0.38 to 1.17 and from 33.8 to 464.6mg kg^{-1}, respectively. The average Cd level in 1990 was less than that in 1982, but the Zn level in 1990 was higher than that in 1982 in general. No variation in Cd contents was observed in soils at the different distances from the source of waste water, but Zn contents in soils were lower with the increasing distances from the source of waste water. A significant correlation was observed among Cd content, OM, available silicate, CEC and $Ca^{++}$. Similar results existed among Zn content of 1982, OM and $Ca^{++}$. The Cd content in subsurface soils of 1992 was significantly correlated with Zn, Cu, and Pb in soils, and the Zn content in soils was significantly correlated with the Cu and Pb in soils, regardless of years. The Cd content in leaf blades of rice was more than seven times higher than that in brown rice. The Zn content in rice was higher than that in leaf blades and in panicle axis. The Cd content in panicle axis and the Zn content in all parts of rice were correlated with Zn, Cu and Pb contents in soils. The Cd and Zn contents in brown rice ranged from 0.10 to 0.90mg $kg^{-1}$ and from 4.2 to 95.9mg $kg^{-1}$ in the Mangyeong River Area, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.1
• /
• pp.9-19
• /
• 1992

To ditermine the accumulation of Cu and Pb in crops grown on Sludge-treated Soils, four crop plants, green onion(A Ilium ascalonicum L.), radish(Raphanus sativus L.), potato(Solanum tuberosum L.) and Chinese cabbage(Brassica pekinensis Rupr), were grown in greenhouses on soils treated with municipal sewage sludge at different levels of 0, 22.5, 45, and 90ton/ha as soil dry weight. The contant of heavy metals were analyzed in plant parts of the crop species and the statistical characteristics were investigated. The results were as follows: 1. Cu and Pb contents in experimental plants were increased in accordance with quanti of sludge applied. 2. Accumulation of Cu and Pb in leaves of plants was increased in order of radish

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.213-226
• /
• 2011

In global supply chain, the scheduling problems of large products such as ships, airplanes, space shuttles, assembled constructions, and/or automobiles are complicated by nature. New scheduling systems are often developed in order to reduce inherent computational complexity. As a result, a problem can be decomposed into small sub-problems, problems that contain independently small scheduling systems integrating into the initial problem. As one of the authors experienced, DAS (Daewoo Shipbuilding Scheduling System) has adopted a two-layered hierarchical architecture. In the hierarchical architecture, individual scheduling systems composed of a high-level dock scheduler, DAS-ERECT and low-level assembly plant schedulers, DAS-PBS, DAS-3DS, DAS-NPS, and DAS-A7 try to search the best schedules under their own constraints. Moreover, the steep growth of communication technology and logistics enables it to introduce distributed multi-nation production plants by which different parts are produced by designated plants. Therefore vertical and lateral coordination among decomposed scheduling systems is necessary. No standard coordination mechanism of multiple scheduling systems exists, even though there are various scheduling systems existing in the area of scheduling research. Previous research regarding the coordination mechanism has mainly focused on external conversation without capacity model. Prior research has heavily focuses on agent-based coordination in the area of agent research. Yet, no scheduling domain has been developed. Previous research regarding the agent-based scheduling has paid its ample attention to internal coordination of scheduling process, a process that has not been efficient. In this study, we suggest a general framework for agent-based coordination of multiple scheduling systems in global supply chain. The purpose of this study was to design a standard coordination mechanism. To do so, we first define an individual scheduling agent responsible for their own plants and a meta-level coordination agent involved with each individual scheduling agent. We then suggest variables and values describing the individual scheduling agent and meta-level coordination agent. These variables and values are represented by Backus-Naur Form. Second, we suggest scheduling agent communication protocols for each scheduling agent topology classified into the system architectures, existence or nonexistence of coordinator, and directions of coordination. If there was a coordinating agent, an individual scheduling agent could communicate with another individual agent indirectly through the coordinator. On the other hand, if there was not any coordinating agent existing, an individual scheduling agent should communicate with another individual agent directly. To apply agent communication language specifically to the scheduling coordination domain, we had to additionally define an inner language, a language that suitably expresses scheduling coordination. A scheduling agent communication language is devised for the communication among agents independent of domain. We adopt three message layers which are ACL layer, scheduling coordination layer, and industry-specific layer. The ACL layer is a domain independent outer language layer. The scheduling coordination layer has terms necessary for scheduling coordination. The industry-specific layer expresses the industry specification. Third, in order to improve the efficiency of communication among scheduling agents and avoid possible infinite loops, we suggest a look-ahead load balancing model which supports to monitor participating agents and to analyze the status of the agents. To build the look-ahead load balancing model, the status of participating agents should be monitored. Most of all, the amount of sharing information should be considered. If complete information is collected, updating and maintenance cost of sharing information will be increasing although the frequency of communication will be decreasing. Therefore the level of detail and updating period of sharing information should be decided contingently. By means of this standard coordination mechanism, we can easily model coordination processes of multiple scheduling systems into supply chain. Finally, we apply this mechanism to shipbuilding domain and develop a prototype system which consists of a dock-scheduling agent, four assembly- plant-scheduling agents, and a meta-level coordination agent. A series of experiments using the real world data are used to empirically examine this mechanism. The results of this study show that the effect of agent-based platform on coordinated scheduling is evident in terms of the number of tardy jobs, tardiness, and makespan.

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.275-282
• /
• 2018

Miscanthus species are known as a genus of eco-friendly and low-maintenance cost ornamental grasses. Plug and cutting methods were tested for multi-propagation of most promising ornamental Miscanthus species in greenhouse and field plot. The plug formation period with three different cell sizes with four cultivars (M. sinensis 'Andersson', 'Strictus', 'Gracillimus', 'Variegatus') were evaluated the seedling development stages with two irrigation types of the over-head and the bottom watering in greenhouse and field plot afterward during 2015-2016 season. In seedling plug test, the size of tray cell affected the plug formation. Bottom irrigation resulted positively on plant height, weight, root and tiller development compared with the over-head irrigation. Plug cell size affected the plant growth in the field after transplanting. All of the 3 Miscanthus species showed higher rates of successful propagation at the lower nodes before inflorescence formation (vegetative growth stage). To analyze the survival factors of M. xgiganteus cutting, the cutting time, node part, and culm diameter were tested as independent variables with the binary logistic model. The survival probability was influenced by node part and culm diameter significantly. The third and fifth node parts showed 0.12 (8X higher failure probability) and 0.02 (50X higher failure probability) times less survival probability. It means the survival probability will be increased by using older and lower part of cuttings during a vegetative growth stage before inflorescences of M. xgiganteus.