• Journal of Radiation Protection and Research
• /
• v.36 no.2
• /
• pp.71-78
• /
• 2011

Yeong-Gwang N.P.P Private Environment Supervisory Organization analyzed over 3,000 samples including 10 marine and 24 land samples from the year 2,000 to 2009. According to the results of the analysis, artificial nuclides that resulted from the effect of Yeong-Gwang Nuclear Power Plant operations were not detected in most samples. However, from the rain and seawater samples, which were taken from inside the plants such as the intake, the discharge and the observatory, $^3H$ was detected although it was below the regulation level. The $^3H$ concentration detected in the rain taken from the observatory, by the yearly average criterion, was 30.5~40.0 $Bq{\cdot}L^{-1}$, which is around 20 times the $^3H$ concentration detected in the surroundings of the power plants, but it is 0.1% of the regulation level of 40,000 $Bq{\cdot}L^{-1}$. Also, $^3H$ concentration detected in the seawater taken from the intake and the discharge, by the yearly average criterion, was 2.75~17.8$Bq{\cdot}L^{-1}$, which means the concentration detected in the discharge is about 140~280% higher than that detected in the intake except the year 2006. Based on these results, it was determined that, although lower than the regulation level, the $^3H$ in gas and liquid form detected in the rain and seawater sampled from the observatory and the discharge was released into the environment from the power plants. Therefore, regular monitoring and analysis is required on the level of $^3H$ in the observatory and the discharge.

• Journal of Korea Water Resources Association
• /
• v.52 no.5
• /
• pp.349-360
• /
• 2019

The purpose of this study is to evaluate the stream flow and water quality (SS, T-N, and T-P) behavior of Nakdong river basin ($23,609.3km^2$) by simulating the dam and weir operation scenarios using SWAT (Soil and Water Assessment Tool). The operation senarios are the simultaneous release for all dam and weirs (scenario 1), simultaneous release for all weirs (scenario 2), and sequential release for the weirs with one month interval from upstream weirs (scenario 3). Before evaluation, the SWAT was calibrated and validated using 11 years (2005-2015) daily multi-purpose dam inflow at 5 locations (ADD, IHD, HCD, MKD, and MYD), multi-function weir inflow at 7 locations (SHW, GMW, CGW, GJW, DSW, HCW, and HAW), and monthly water quality monitoring data at 6 locations (AD-4, SJ-2, EG, HC, MK-4, and MG). For the two dam inflow and dam storage, the Nash-Sutcliffe efficiency (NSE) was 0.56~0.79, and the coefficient of determination ($R^2$) was 0.68~0.90. For water quality, the $R^2$ of SS, T-N, and T-P was 0.64~0.79, 0.51~0.74, and 0.53~0.72 respectively. For the three scenarios of dam and weir release combination suggested by the ministry of environment, the scenario 1 and 3 operations were improved the stream water quality (for T-N and T-P) within the 3 months since the time of release, but it showed the negative effect for 3 months after compared to scenario 2.

• Journal of Radiation Protection and Research
• /
• v.39 no.1
• /
• pp.7-13
• /
• 2014

Phosphate rock, phosphogypsum, and products in phosphate processing facility contain naturally occurring radioactive materials (NORM). Therefore, they may give rise to enhanced radiation dose to workers due to inhalation of airborne particulates. Internal dose due to particle inhalation varies depending on particle properties. The objective of the present study was to characterize particle properties at the largest phosphate processing facility in Korea. A cascade impactor was employed to sample airborne particulates at various processing areas in the plant. The collected samples were used for characterization of particle size distribution, particle concentration in the air, and shape analysis. Aerodynamic diameters of airborne particulates ranged 0.03-100 ${\mu}m$ with the highest concentration at the particle size range of 4.7-5.8 ${\mu}m$ (geometric mean = 5.22 ${\mu}m$) or 5.8-9.0 ${\mu}m$ (geometric mean = 7.22 ${\mu}m$). Particle concentrations in the air varied widely by sampling area up to more than two orders of magnitude. The large variation resulted from the variability of mechanical operations and building ventilations. The airborne particulates appeared as spheroids or rough spherical fragments across all sampling areas and sampled size intervals. Average mass densities of phosphate rocks, phosphogypsums, and fertilizers were 3.1-3.4, 2.1-2.6, and 1.7 $gcm^{-3}$, respectively. Radioactivity concentration of uranium series in phosphate rocks varied with country of origin, ranging 94-866 $Bqkg^{-1}$. Among the uranium series, uranium was mostly concentrated on products, including phosphoric acid or fertilizers whereas radium was concentrated on byproducts or phosphogypsum. No significant radioactivity of $^{226}Ra$ and $^{228}Ra$ were found in fertilizer. However, $^{40}K$ concentration in fertilizer was up to 5,000 Bq $g^{-1}$. The database established in this study can be used for the accurate risk assessment of workers due to inhalation of airborne particles containing NORM. In addition, the findings can be used as a basic data for development of safety standard and guide and for practical radiation safety management at the facility.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.5
• /
• pp.1-15
• /
• 2020

This study was designed to come up with a way of managing a cultural landscape forest by conducting research on the vegetation structure and growth characteristics. This study's target site, which was 45,201㎡ in size, was Pinus densiflora forest for Sugumagi placed at the entrance of Unmun Temple, Sinwon-ri, Unmun-myeon, and Cheongdo-gun in the southernmost part of Gyeongsangbuk-do, Korea. Sugumagi means the water of the valley flows far away, and where no downstream is visible according to feng shui. The historical sources of the Sugumagi Pinus densiflora forest at the entrance of Unmun Temple isn't clear. It waw only found at that location. The Pinus densiflora forest at the entrance of Unmun Temple is located in the waterway in terms of Feng Shui. The present condition of growth was investigated through a grid surveys of 98 trees and Pinus densiflora growth. As a result of the analysis of growth status, Pinus densiflora, Larix leptolepis, Zelkova serrata, Celtis sinensis, and Rhus javanica were distributed in the conopy layer, and 28 species including Ailanthus altissima were grown in the understroy layer, and 92 species, including Ampelopsis brevipedunculata, in the shrub layer. The plant community structure was divided into low, medium and high-density Pinus densiflora forests in the study area, based on the number in the conopy layer and the grade of and the trees analyzed. As a result of the analysis, the Pinus densiflora dominated the low, medium and high-density Pinus densiflora forests, and there were no competitive species. The relative dominance of the low-density Pinus densiflora forests was 46.9% on average, medium-density was 62.6% and 50.2% was found in high-density. The mean species diversity of Shannon in the low-density study was 0.7055, medium-density study was 0.8966 and the average species diversity of Shannon in the high-density study was 0.8317. The analysis of the age and growth of 25 sample trees in the Sugumagi Pinus densiflora forest shows that the distribution of the chest diameter (DBH) of the sample Pinus densiflora is 38 to 77cm with the average chest diameter being 61.1cm. The age was 84-161 years and the average was 114 years. In the Pinus densiflora forest, most(670,659, or 98.3%) of the tree trunk wound was collected for rosins during the Japanese colonia Era, Of the total 670, 659 were Pinus densiflora, 98.3% of the total. 394 were surgically repaired in 2005. For the preservation of the Sugumagi Pinus densiflora forest, dead trees should be replaced with substitute trees appropriate to the middle and south topography. It is demanded that foreign species such as Larix leptolepis in the research area should be removed and Pinus densiflora that underwent surgical operations should be regularly sterilized. It is also emphasized that the management of insecticide is important.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.325-332
• /
• 1999

A manure management plan is important for all dairy operations. This experiment was conducted to determine the effect of different nitrogen(N) application rates of liquid cattle manure on the forage quality, N recovery, and total forage yields of corn-oats cropping system and soil properties at the National Livestock Research Institute, RDA, Suweon in 1997. Eight treatments consisting of no fertilizer, chemical fertilizer $320kg\;N\;ha^{-1}$ as urea, the continuous applications of 320, 640 and $960kg\;N\;ha^{-1}$ as liquid cattle manure(LCM), the residual effects of 200, 400 and $600kg\;N\;ha^{-1}$ as liquid cattle manure were arranged in a randomized complete block design with three replications. Mean plant height of fall sown oats was 70 and 61cm at the continuous application and the residual effect plots, respectively. Mean dry matter percent of fall sown oats at the residual effect plots was higher by 0.9% than that of oats at the continuous application plots, but there were no differences among all treatments. Mean crude protein(CP), acid detergent fiber(ADF), and neutral detergent fiber (NDF) contents of fall sown oats at the continuous application plots were higher by 1.0, 1.6, and 3.1%, respectively, than those of the residual effect plots. Also, there were significant differences among treatments (P<0.05). Total forage dry matter yields of corn and oats cropping system were ranged from 11,365 to $25,668kg\;ha^{-1}$ among the treatments. The yield was orderly ranked as LCM $960kg\;N\;ha^{-1}$ > LCM $600kg\;N\;ha^{-1}$ > LCM $640kg\;N\;ha^{-1}$ > LCM $400kg\;N\;ha^{-1}$ (P<0.05). Compared with the control, manurial value(MV) was 158 and 139% for the plot of the LCM $960kg\;N\;ha^{-1}$ and that of the LCM $600kg\;N\;ha^{-1}$, respectively. N recovery percent of fall sown oats was the highest at the plot of the LCM $200kg\;N\;ha^{-1}$ by 50%, and then was higher in order of the LCM $400kg\;N\;ha^{-1}$, LCM $600kg\;N\;ha^{-1}$, and LCM $320kg\;N\;ha^{-1}$. Contents of exchangeable cation in the soil of the residual effect plots was higher than that of the continuous application plots. These results suggest that the LCM $600kg\;N\;ha^{-1}$ may be the most effective in total forage dry matter yields, manurial value, N recovery, and utilizing liquid manure N under the corn and oats double cropping system.

• The Korean Journal of Air & Space Law and Policy
• /
• v.5
• /
• pp.101-118
• /
• 1993

Generally there is no law and liability system which applies particulary to commercial space ventures. There are several international treaties and national statutes which deal with space ventures, but their impact on the liability of commercial space ventures has not been significant. Every state law in the United States will impose both tort and contract liability on those responsible for injuries or losses caused by defective products or by services performed negligently. As with the providers of other products and services, those who participate in commercial space ventures have exposure to liability in both tort and contract which is limited to the extent of the resulting damage The manufacturer of a small and cheap component which caused a satellite to fail to reach orbit or to operate nominally has the same exposure to liability as the provider of launch vehicle or the manufacturer of satellite into which the component was incorporaded. Considering the enormity of losses which may result from launch failure or satellite failure, those participated in commercial space ventures will do their best to limit their exposure to liability by contract to the extent permitted by law. In most states of the United States, contracts which limit or disclaim the liability are enforceable with respect to claims for losses or damage to property if they are drafted in compliance with the requirements of the applicable law. In California an attempt to disclaim the liability for one's own negligence will be enforceable only if the contract states explicitly that the parties intend to have the disclaimer apply to negligence claims. Most state laws of the United States will refuse to enforce contracts which attempt to disclaim the liability for gross negligence on public policy grounds. However, the public policy which favoured disclaiming the liability as to gross negligence for providers of launch services was pronounced by the United States Congress in the 1988 Amendments to the 1984 Commercial Space Launch Act. To extend the disclaimer of liability to remote purchasers, the contract of resale should state expressly that the disclaimer applies for the benefit of all contractors and subcontractors who participated in producing the product. This situation may occur when the purchaser of a satellite which has failed to reach orbit has not contracted directly with the provider of launch services. Contracts for launch services usually contain cross-waiver of liability clauses by which each participant in the launch agrees to be responsible for it's own loss and to waive any claims which it may have against other participants. The crosswaiver of liability clause may apply to the participants in the launch who are parties to the launch services agreement, but not apply to their subcontractors. The role of insurance in responding to many risks has been critical in assisting commercial space ventures grow. Today traditional property and liability insurance, such as pre-launch, launch and in-orbit insurance and third party liability insurance, have become mandatory parts of most space projects. The manufacture and pre-launch insurance covers direct physical loss or damage to the satellite, its apogee kick moter and including its related launch equipment from commencement of loading operations at the manufacture's plant until lift off. The launch and early orbit insurance covers the satellite for physical loss or damage from attachment of risk through to commissioning and for some period of initial operation between 180 days and 12 months after launch. The in-orbit insurance covers physical loss of or damage to the satellite occuring during or caused by an event during the policy period. The third party liability insurance covers the satellite owner' s liability exposure at the launch site and liability arising out of the launch and operation in orbit. In conclusion, the liability in commercial space ventures extends to any organization which participates in providing products and services used in the venture. Accordingly, it is essential for any organization participating in commercial space ventures to contractually disclaim its liability to the extent permitted by law. To achieve the effective disclaimers, it is necessary to determine the applicable law and to understand the requirements of the law which will govern the terms of the contract. A great deal of funds have been used in R&D for commercial space ventures to increase reliability, safety and success. However, the historical reliability of launches and success for commercial space ventures have proved to be slightly lower than we would have wished for. Space insurance has played an important role in reducing the high risks present in commercial space ventures.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.4
• /
• pp.36-48
• /
• 2018

This study surveyed 599 elementary schools in Seoul to provide measures for the quantitative expansion and sustainable operation of environmentally-friendly school garden. Of all schools, 161 schools had formed and were operating school gardens. The total area of school gardens was $166,901m^2$ and the mean area was $131.2m^2$ in elementary, junior high and high schools in Seoul. Meanwhile, the total area of school gardens was $65,493m^2$ and the mean area was $363m^2$ in 161 schools that participated in the survey, indicating $1.15m^2$ per student. Of these schools, 11.8% were operating gardens themselves, while 50.3% were operating gardens that had been newly renovated or environmentally improved by institutional support projects after initially managing gardens themselves. According to the locations of school gardens, mixed-type gardening (a combination of school gardening and container vegetable gardening) accounted for 34.8%, followed by school gardening at 32.9%, container vegetable gardening at 29.2%, and suburb community gardening at 3.1%. Those in charge of garden operations were teachers at 51.6%, comprising the largest percentage. Facilities built when forming the garden included storage facilities for small-scale greenhouses and farming equipment at 26.1%, accounting for the largest percentage. No additional facilities constructed accounted for 21.7%. The greatest difficulty in operating gardens was garden management at 34.2%. The most needed elements for the sustainable operation of gardens were improvement in physical environment and the need for hiring a paid garden, each accounting for 32%. The most important purpose for school gardening was creating educational environments (81.6%). The major source for gaining information on garden management was consultation from acquaintances (67.8%). Schools that utilize plant waste from gardens as natural fertilizers accounted for 45.8% of all schools. Responses to the impact of operating school gardens for educational purpose were positive in all schools as 'very effective' in 63.2% and 'effective' in 36.8%. This study was meaningful in that it intended to identify the current status of the operation of school gardens in elementary schools in Seoul, support the formation of school gardens appropriate for each school with sustainable operation measures, implement a high-quality education program, develop teaching materials, expand job training opportunities for teachers in charge, devise measures to support specialized instructors, and propose the need for a garden management organization.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.114-133
• /
• 2013

This study aims to identify the natural damage of the Samcheonsaji Temple Site in Bukhansan National Park and to suggest the plans to minimize damage for the remains. The types of natural damage are classified into direct vegetation damage, indirect topographical damage, and artificial damage. The most popular causes of damage to temple sites include the roots of trees as direct vegetation damage and the soil erosion by rain or stream as topographical damage. Direct vegetation damage includes burial remains damaged by the root of trees and vines, but it is often observed that some trees have contributed to protection against collapse. Indirect topographical changes have damaged the ruins by soil erosion caused by floods or typhoons. Vegetation changes due to topographical reasons have also caused damage. Artificial reasons of damage include forestry operations and compaction by hikers. Based on the analysis of the findings, the following could be suggested as plans to resolve these problems: 1. Natural damage occurs slowly due to negligence. Therefore, it could be reduced by forestry improvement, including forest density control through thinning, planting to prevent landslides, maintaining grasslands nearby. 2. Deciduous broadleaf trees can be planted to reduce soil erosion by rainfall. It is necessary to maintain the density of forests at around $0.02{\sim}0.18trees/m^2$. 3. It would be good to grow Quercus spp and Carpinus spp or weaken the community of Robinia pseudoacacia and Pueraria lobata which disturb the ecosystem. Samcheonsaji Temple Site is located in Mt. Bukhan National Park that is a publicly owned property. Therefore, it is constantly maintained for natural preservation and vegetation management could be considered for the preservation of historical remains.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.103-119
• /
• 2023

Since the Korean government has decided to apply the policy of BIM (Building Information Modeling) to the entire construction industry, it has experienced a positive trend in adoption and utilization. BIM can reduce workloads by building model objects into libraries that conform to standards and enable consistent quality, data integrity, and compatibility. In the domestic architecture, civil engineering, and the overseas landscape architecture sectors, many BIM library standardization studies have been conducted, and guidelines have been established based on them. Currently, basic research and attempts to introduce BIM are being made in Korean landscape architecture field, but the diffusion has been delayed due to difficulties in application. This can be addressed by enhancing the efficiency of BIM work using standardized libraries. Therefore, this study aims to provide a starting point for discussions and present a classification system for objects and attribute information that can be referred to when creating landscape libraries in practice. The standardization of landscape BIM library was explored from two directions: object classification and attribute information items. First, the Korean construction information classification system, product inventory classification system, landscape design and construction standards, and BIM object classification of the NLA (Norwegian Association of Landscape Architects) were referred to classify landscape objects. As a result, the objects were divided into 12 subcategories, including 'trees', 'shrubs', 'ground cover and others', 'outdoor installation', 'outdoor lighting facility', 'stairs and ramp', 'outdoor wall', 'outdoor structure', 'pavement', 'curb', 'irrigation', and 'drainage' under five major categories: 'landscape plant', 'landscape facility', 'landscape structure', 'landscape pavement', and 'irrigation and drainage'. Next, the attribute information for the objects was extracted and structured. To do this, the common attribute information items of the KBIMS (Korean BIM Standard) were included, and the object attribute information items that vary according to the type of objects were included by referring to the PDT (Product Data Template) of the LI (UK Landscape Institute). As a result, the common attributes included information on 'identification', 'distribution', 'classification', and 'manufacture and supply' information, while the object attributes included information on 'naming', 'specifications', 'installation or construction', 'performance', 'sustainability', and 'operations and maintenance'. The significance of this study lies in establishing the foundation for the introduction of landscape BIM through the standardization of library objects, which will enhance the efficiency of modeling tasks and improve the data consistency of BIM models across various disciplines in the construction industry.