• Title/Summary/Keyword: Plant Evaluation

Search Result 2,883, Processing Time 0.034 seconds

Herbal Remedies for Combating Irradiation: a Green Anti-irradiation Approach

  • Lachumy, Subramanion Jothy;Oon, Chern Ein;Deivanai, Subramanian;Saravanan, Dharmaraj;Vijayarathna, Soundararajan;Choong, Yee Siew;Yeng, Chen;Latha, Lachimanan Yoga;Sasidharan, Sreenivasan
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.14 no.10
    • /
    • pp.5553-5565
    • /
    • 2013
  • Plants play important roles in human life not only as suppliers of oxygen but also as a fundamental resource to sustain the human race on this earthly plane. Plants also play a major role in our nutrition by converting energy from the sun during photosynthesis. In addition, plants have been used extensively in traditional medicine since time immemorial. Information in the biomedical literature has indicated that many natural herbs have been investigated for their efficacy against lethal irradiation. Pharmacological studies by various groups of investigators have shown that natural herbs possess significant radioprotective activity. In view of the immense medicinal importance of natural product based radioprotective agents, this review aims at compiling all currently available information on radioprotective agents from medicinal plants and herbs, especially the evaluation methods and mechanisms of action. In this review we particularly emphasize on ethnomedicinal uses, botany, phytochemistry, mechanisms of action and toxicology. We also describe modern techniques for evaluating herbal samples as radioprotective agents. The usage of herbal remedies for combating lethal irradiation is a green anti-irradiation approach for the betterment of human beings without high cost, side effects and toxicity.

Study of Wear Characteristics of Hydraulic Equipment Used in Power Plants (발전소용 유압기기의 마모특성 연구)

  • Lee, Yong Bum;Lee, Gi Chun;Chang, Mu Seong
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.37 no.9
    • /
    • pp.1183-1188
    • /
    • 2013
  • The reliability of hydraulic equipment used in power plants is especially important because failures that occur in the power plant can have a great ripple effect on human lives and financial losses. In this study, specimens using the materials used in the spool and sleeve of hydraulic valves of power plants have been produced, heat-treated, and tested under the precipitation conditions of phosphate ester hydraulic fluid with a variety of conditions. 23 full factorial designs have been applied to evaluate the significance of factors that affect the wear loss of the specimen, specifically, the load, velocity, and temperature. The significance evaluation was performed on the main effects and two-way interactions for wear loss based on the experiment results, and the mathematical equations between the wear loss and the three factors were derived from the analysis results.

Evaluation of Major Nutrients of Domestic Farmed Eels Anguilla japonica (국내 양식 뱀장어 (Anguilla japonica)에서의 주요 영양학적 성분의 평가)

  • Cho, Hye-Sun;Choi, Jong-Hwan;Ko, Hong-Beom;Seo, Jae-Sung;Ahn, Jun-Cheul
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.44 no.3
    • /
    • pp.237-242
    • /
    • 2011
  • To evaluate the proximate composition and main nutritive ingredients (vitamin A, $V_A$; vitamin E, $V_E$; cholesterol; the composition of fatty acids) between eels cultured in different domestic eel farms, we analyzed edible parts of eels that were cultured in three "Water Recirculation System (WRS)" farms and three "Still-Water System (SWS)" farms. We found differences in crude protein, crude lipids and the ash content of eel meat between the farms, but water content showed no significant difference. $V_A$ and $V_E$ contents did not show meaningful differences between the two culture methods, but there was a noticeable distinction between the eel farms. In particular, $V_E$ content showed significant differences between the eels of each farm (highest farm, about 25 mg/100 g dry wt; lowest farm, about 1 mg/100 g dry wt). The fatty acids of cultured eels were composed of monoenes (MUFA, 55-60%), saturates (SFA, 30-33%), $\omega$-6 highly unsaturates (HUFA, 1.6-2%) and $\omega$-3 HUFA (8-9.2%). The MUFA content of WRS eels ($59.9{\pm}1.97%$) was higher than that of SWS eels ($55.8{\pm}0.48%$). The contents of other fatty acids were higher in SWS eels (SFA, $33.0{\pm}0.52%$; $\omega$-6FUFA, $1.98{\pm}0.2%$; $\omega$-3 HUFA, $9.2{\pm}0.67%$) than in WRS eels (SFA, $30.5{\pm}1.34%$; $\omega$-6 HUFA, $1.62{\pm}0.19%$; $\omega$-3 HUFA, $8.0{\pm}0.5%$).

Study of stabilizing and efficacy evaluation in human of Oleanoic acid with poly-glyceryl nano emulsion system (올레아노익산의 폴리글리세릴계 나노에멀젼에서의 안정화 및 인체적용 유효성평가에 대한 연구)

  • Han, Sang-Keun;Lee, Dong-Kyu
    • Journal of the Korean Applied Science and Technology
    • /
    • v.32 no.1
    • /
    • pp.157-164
    • /
    • 2015
  • Oleanolic acid is known as which anti-cancer, anti-sinhaeng angiogenic, anti-inflammatory, antioxidant and anti-wrinkle effects. We focused on the antioxidant activity of oleanolic acid was separated from the natural plant and It was confirmed that the whitening effect. In this study, oleanolic acid was stabilized by polyglyceryl surfactant which from natural origin with only a simple stirring operation, and compared with lecithin liposome that was manufactured with high cost facility. The transdermal transition rate of 0.4% oleanolic acid polyglyceryl nanoemulsion was 95%, and it was simillar with lecithin liposome of 92%. 65% of 3hr transdermal transition rate of polyglyceryl nanoemulsion indicate charistiristcs of quick release, compared with 45% of lecithin liposome's 3hr transdermal transition rate. In the in-vivo clinical trial test, polyglyceryl nanoemulsion of 0.4% oleanolic acid was higher 25% in 2nd week, 58% in 4th and 8th weeks than non-added oleanolic acid emulsion.

Evaluation of Nitrogen Mineralization and Nitrification in Soil Incorporated with Wine Sludge for Pepper (시설고추 재배 시 포도주부산물의 토양의 질산화에 미치는 영향)

  • Myong Suk Shin;Joung Du Shin;Hee Chun;Yong Du Kwon;Jong Sun Park
    • Journal of Bio-Environment Control
    • /
    • v.10 no.4
    • /
    • pp.219-224
    • /
    • 2001
  • This experiment was conducted to evaluate net mineralization and nitrification in rain shelter soil incorporated with wine sludge. Net mineralization and nitrification rates varied among treatments during pepper growing periods. In general, net mineralization increased up to 90 days after transplanting before its decrease during the rest growing periods. Maximum net mineralization and nitrification in upper 0-15 cm layer soil were observed in T4 at 90 days after transplanting. The greatest amount of mineralization in upper layer soil was 272.5 mg.kg$^{-1}$ at 30 days in the control and 843.3 mg.kg$^{-1}$ at 90 days after transplanting in T4. Overall, both net mineralization and net nitrification were greater in the upper layer soil than in the lower 15-30 cm layer soil.

  • PDF

Evaluation of Load Capacity and Toughness of Porous Concrete Blocks Reinforced with GFRP Bars (GFRP 보강 다공성 콘크리트 블록의 내력 및 인성 평가)

  • Jung, Seung-Bae;Yang, Keun-Hyeok
    • Journal of the Korea Institute of Building Construction
    • /
    • v.17 no.5
    • /
    • pp.403-409
    • /
    • 2017
  • In this study, mix proportioning of porous concrete with compressive strength and porosity exceeding 3MPa and 30%, respectively, was examined and then load capacity and flexural toughness of the porous concrete block were evaluated according to the different arrangements of the GFRP bars. To achieve the designed requirements of porous concrete, it can be recommended that water-to-cement ratio and cement-to-coarse aggregate ratio are 25% and 20%, respectively, under the aggregate particle distribution of 15~20mm. The failure mode of porous concrete blocks reinforced with GFRP bars was governed by shear cracks. As a result, very few flexural resistance of the GFRP was expected. However, the enhanced shear strength of porous concrete due to the dowel action of the GFRP bars increased the load capacity and toughness of the blocks. The porous concrete blocks reinforced with one GFRP bar at each compressive and tensile regions had 2.1 times higher load capacity than the companion non-reinforced block and exhibited a high ductile behavior with the ultimate toughness index ($I_{30}$) of 43.4.

State-of-the-art of Life Cycle Assessment for Biodiesel Production from Plant Biomass (식물성 바이오매스로부터 바이오디젤 생산에 대한 LCA 연구 현황)

  • Seo, Bong-Kuk;Song, Seung-Koo
    • KSBB Journal
    • /
    • v.25 no.1
    • /
    • pp.1-10
    • /
    • 2010
  • Biodiesel is a type of biofuel obtained from bioresources and able to use in diesel vehicles as an alternative/additive to petro diesel. In recent biodiesel research, there are three main issues which include high quality biodiesel, low cost feed stock and a highly efficient biodiesel production process. The sustainable production and use of biodiesel are attracting much attention in the renewable energy field. In this paper, we review some of the literatures related to environmental and economic evaluation for biodiesel production and analysis the issues including life cycle assessment (LCA), global warming potential (GWP), energy consumption, biodiesel production cost, production technologies and feedstock.

Economic Evaluations of Direct Coal Liquefaction Processes (직접석탄액화 공정의 경제성 평가)

  • Park, Joo-Won;Kweon, Yeong-Jin;Kim, Hak-Joo;Jung, Heon;Han, Choon
    • Korean Chemical Engineering Research
    • /
    • v.47 no.1
    • /
    • pp.127-132
    • /
    • 2009
  • This report examines the economic feasibility of a commercial 50,000 barrel per day direct coal liquefaction(DCL) facility to produce commercial-grade diesel and naphtha liquids from medium-sulfur bituminous coal. The scope of the study includes capital and operating cost estimates, sensitivity analysis and a comparative financial analysis. Based on plant capacity of 50,000BPD, employing Illinois #6 bituminous coal as feed coal the total capital cost appeared $3,994,858,000. Also, the internal rate of return of DCL appeared 6.60% on the base condition. In this case, coal price and sale price of products were the most influence factors. And DCL's payback period demanded a long time(12.3 years), because of high coal price at the present time. According to sensitivity analyses, the important factors on DCL processes were product sale price, feed coal price and the capital cost in order.

Evaluation of Host Resistance of 18 Warm-Season and 20 Cool-Season Turfgrass Species and Cultivars to Spodoptera depravata(Butler) (잔디밤나방에 대한 난지형 잔디와 한지형 잔디의 내충성 평가)

  • 박봉주
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.31 no.4
    • /
    • pp.74-81
    • /
    • 2003
  • The need for insect and mite resistant turfgrass cultivars arose because of problems associated with pesticide use. Representative cultivars and genotypes of 18 warm-season turfgrass [Zoysia japonica Steud., Z. japonica${\times}$Z. metrella hybrids, Z. japonica${\times}$Z. tenuifotia hybrids, Z. matrella (L.) Merr., Cynodon dactylon (L.) Pers., C. dactylon${\times}$C. transvallensis hybrids, Paspalum notatum Flugge., P. vaginatum Swartz., Stenotaphrum secundatum (Walt.) Kuntze, Eremochloa ophiuroides (Munro.) and Buchloe dactyloides (Nutt.) Engelm.] and 20 cool-season turfgrasses [Poa pratensis L., Festuca arundinacea Schreb., F. rubra L., F. rubra var. commutata Gaud., F. ovina var. duriuscula L. Koch. Agrostis tenuis Sibth., A. palustris Huds., and Latium perenne L.] were evaluated for host resistance to feeding by the Spodoptera depravata (Butler) in the laboratory. Two experiments were set up in the laboratory using 8.5cm diameter${\times}$4.0cm deep plastic petri dishes as larvae feeding chambers. In experiment 1, one neonate larvae were place on the grass in each dish and the dishes were arranged with 5 replicates each within an environmental chamber maintained at $25^{\circ}C$ and 15h light: 9h dark Larval survival and larval weights at 7d and 14d, pupal weights, and days to pupation were compared among turfgrasses. In Experiment 2, 4cm sections of all grasses were oriented equidistant from each other in a pattern resembling the spokes of a wheel. Five one neonate larvae were introduced to the center of each dish. Dishes were immediately placed in an environmental chamber held at $25^{\circ}C$, 15h light: 9h dark Larvae were allowed to feed for 24h. Damage was rated from 0(no damage) to 9(completely consumed) were made for eachturfgrass. Resistance as antibiosis (high mortality, slowed growth, and least preference) was identified in Z. japonica${\times}$Z. tenuifolia hybirids ‘Emerald’, Z. japonica${\times}$Z. metrella hybirds ‘Miyako’ and Eremochloa ophiuroides (Munro.). Cool-season turfgrasses tested were susceptible to feeding by Spodoptera depravata (Butler).

AN EVALUATION OF ROTATIONAL STABILITY IN ENDODONTIC ELECTRONIC MOTORS (근관치료용 전기모터의 회전 안정성 평가)

  • Park, Se-Hee;Seo, Hyun-Woo;Hong, Chan-Ui
    • Restorative Dentistry and Endodontics
    • /
    • v.35 no.4
    • /
    • pp.246-256
    • /
    • 2010
  • The purpose of this study was to evaluate a rotational stability of endodontic electronic motors by comparing the changes of rotational speed, depending on the number of usages and with/without static load. Twelve new endodontic electronic motors were used in this study. Non contact type digital tachometer was used for measuring the rotational speed of handpiece. True RMS Multimeter was used for measuring the voltages and the electric currents. All measurements were recorded every 10 seconds during 10 minutes and repeated 9 times. Five repetition was done per each electronic motor. To statistical analysis, student t-test, repeated measures and Scheffe's post-hoc tests were performed. In the same motor group, there was no significant difference in all measurements. In all groups, there was no significant difference in the amount of rotational speed changes depending on the number of usages and with/without static load. In the limitation of this study, the results showed that all kinds of endodontic electronic motors in this study had an established rotational stability. Therefore they could be safely used in root canal treatment with a reliable maintenance of rotational speed, regardless of the number of usages and with/without load.