• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.736-742
• /
• 2014

If an accident occurs at work places that handle 'the accident preparedness substances', it causes more property damage and casualties than accidents of normal chemical substances. Even though various systems and regulations have been operated in order to prevent accidents, techniques for reducing and removing human error, which is one of the main reasons of accidents, are still inadequate. In this paper, hazardous work digitization, potential hazard verification, and work evaluation based on domestic technical guidelines have been performed through a case study of the accident of hydrofluoric acid leakage in Gumi in September 2012, and development of a new risk mapping method has been studied to supplement existing systems.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.589-595
• /
• 2015

This study evaluated the in-site compressive strength development of high-strength concrete developed for the mass structures under cold weather condition. Two mock-up wall specimens with $2.0{\times}1.2{\times}1.0m$ in dimension were cured under an average temperature of $5^{\circ}C$. Core strengths measured at different locations of the mock-up walls were compared with the companion standard cylinder strengths. Test results revealed that the core strength of mock-up walls at an age of 3 days is higher by approximately 30% than the companion cylinder strength because of the high curing temperature effect generated from the heat of hydration of cementitious materials. Furthermore, comparisons with the prediction models based on maturity function confirmed that the effect of hydration heat on the curing temperature increase needs to be reflected to reasonably evaluate the on-site compressive strength development of concrete for mass elements.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.79-88
• /
• 2018

This study presents an evaluation method to estimate the damage scale of chemical storage tank of petrochemical plant due to the earthquake that is likely to occur among NaTech damage types. Based on this, the risk for damage reduction of chemical storage tanks was evaluated. As a result of the study, the risk of the storage tank increased greatly considering the earthquake, and the risk was greatly reduced as a result of evaluating the proposed measures to mitigate the damage impact on the earthquake. This study is expected to contribute to the research on the reduction of NaTech damages such as typhoons and thunderstorms as well as earthquakes, and to establish an emergency response plan. In the future, it is necessary to systematically study and institutionalize the risk reduction measures considering earthquakes.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.1
• /
• pp.37-42
• /
• 2010

The stay cylinder weld at the steam generator of Korean Standard Nuclear Power Plants is safety class I component and is subjected to be inspected by the volumetric examination such as ultrasonic method. As accessibility of this area is limited due to the narrow space and high radiation, the existing manual inspection method involves various difficulties. Moreover operators may be exposed to internal contamination by contaminated dust during the surface buffing process to improve the inspection reliability of this area. Recently the new automatic inspection system for stay cylinder welds has been developed. The inspection system basically consists of a driving assembly, data acquisition device and signal processing units. The driving assembly is classified by 1) the scanner for inspecting and buffing the weld, 2) pillars for guiding the scanner and 3) the base frame for loading and supporting pillars. The scanner has 4 sensor modules to inspect in 4 refracted angles and 4 incident directions. These components can be inserted into the skirt of the stay cylinder through the manway hole and assembled easily by one-touch in the skirt. Data acquisition device and signal processing units developed in previous works are also newly upgraded for better processing of data analysis and evaluation. The system has been successfully demonstrated not only in the mock-up but also in the field. In this paper, newly developed inspection system for the stay cylinder weld of the steam generator is introduced and their field applications are discussed.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.2
• /
• pp.63-70
• /
• 2001

This study was initiated to evaluate and resolve the potential problems caused as the MSWI(Municipal Solid Waste Incinerator) fly ash were stabilized and solidified into the cement. The physical and chemical properties of fly ashes (K and M) used in this study were fixed according to the operating conditions of the incineration plant. The compressible strength of the solidified matrix used in this study were measured at 7, 28, and 56 curing days, respectively, to evaluate the stability of the solidified matrix, which were further analyzed by XRD and SEM. The experimental results obtained in this study showed that the relatively long hours of curing periods were needed to solidify the fly ash. The solidified matrix containing K ash had the high and excellent compressible strength of $200{\;}kg/\textrm{cm}^2$, after 56 curing days, but was not good enough in appearance. The analytical data by SEM confirmed that the alkaline Na and K, which are highly dissolved in water, were included in the fly ash and evenly distributed into the exterior surface of the solidified matrix. Whereas, the solidified matrix containing M ash never showed such a compressible strength as shown in the K ash due to the severe fracture, even as early as 7 curing days. Based on its XRD analysis, it appeared that both $C_2S$ and $C_3S$ highly related to the compressible strength were not crystallyzed into the solidified matrix. However, the compressible strength of the solidified and cemented M ash was remarkably improved by 100 times, after the alkalinity was washed out, which indicated that it is equivalent to 30 to 40g per one kg of fly ash.

• Toxicological Research
• /
• v.6 no.1
• /
• pp.41-49
• /
• 1990

Aconiti Tuber is the root of Aconitum sp (Ranunclaceae) which has been considered as one of the most important medicinal plant having cordiotonic, diuretic and analgesic effect. On the other hand, it has been known that Aconiti Tuber contained toxic agent, aconitine alkaloids so that only processed Aconiti Tubers have been used as herbal drug traditionally. For the safety evaluation of processed Aconiti Tuber, quantitative determination of aconitine and acute, subacute toxicity test were performed on 5 commercial processed Aconiti Tubers. Arapid and precise method using HPLC has been developed for the separation and determination of aconitine. Samples were extracted with hydrochloric acid (pH3) and hot water decoction. In case of d-HCL extracts, the contents of aconitine were from 0.08 mg/g to trace. But in case of hot water decoction extracts, the contents of aconitine were not detected. For the investigation of Aconiti Tuber toxicity in rats, hot water decoction samples and methanol extracts were tested. 1) Acute toxicity test Hot water decoction sample and methanol extracts from Aconiti Tuber did not show any toxic effects in rats by an oral administration. $LD_50values of 2 extracts were above 10.0 g/kg. 2) Subacute toxicity study In the repeated administration study, hot water decoction samples were given orally to Sprague-Dawlay rats for 2 week at daily doses of 5.0 g/kg. The results are as follows; No toxic manifestation, body weight changes and lethality were observed during wxperimental period. There were no significant changes in serum enzyme activities such as GOT, GPT, LDH, ALP between treated and control groups. However CPK values were decreased in the Subuja-treated group. (P<0.01). In addition, no gross and microscopic changes were noted in Aconiti Tuber-treated groups.

• Journal of Environmental Science International
• /
• v.21 no.1
• /
• pp.89-96
• /
• 2012

The rate of photosynthesis (A) of leaves from 10 plant species (6 evergreen and 4 deciduous) of the family Fagaceae was measured using a portable photosynthesis analyzer, to examine which species take up $CO_2$ most efficiently. Of the evergreen species, the photosynthetic rate of Castanopsis cuspidata var. sieboldii was highest, and remained above 82.1~106.4 ${\mu}mol\;kg^{-1}s^{-1}$ from July to November. Of the deciduous species, the photosynthetic rate of Quercus acutissima was higher than that of the other three species, and remained high at 83.5~116.6 ${\mu}mol\;kg^{-1}s^{-1}$ from September to November. The photosynthetic rate of the 10 species was positively correlated with stomatal conductance (gs) and transpiration rate (E). However, there was no correlation between photosynthetic rate and intercellular $CO_2$ concentration ($C_i$), although there was a positive correlation just in three species (Q. gilva, Q. acutissima and Q. glauca). These results suggest that the $CO_2$ fixation capacity of C. cuspidata var. sieboldii, an evergreen species, and Q. acutissima, a deciduous species, is significantly higher than that of the other species examined, and that photosynthesis is regulated by both stomatal conductance and transpiration. Therefore, C. cuspidata var. sieboldii and Q. acutissima may be valuable for the evaluation of carbon uptake in urban green spaces as well as in afforested areas.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.11a
• /
• pp.71-79
• /
• 2002

Nuclear design characteristics of duplex burnable poison rod were evaluated based on 24 month cycle fuel for Korean Standard Nuclear Plant. A fuel assembly with duplex burnable poison rod was designed for an equivalent assembly to 16 gadolinia BPs. Duplex BP is composed of inner region of natural U-12wt%Gd$_2$O$_3$ and outer shell of 4.95wt%UO$_2$-2wt%Er$_2$O$_3$. In order to compare this duplex option, assemblies with 140 erbia pins were designed as an alternative option. The variation of k-infinitive, rod worth, pin peaking and MTC were compared. Duplex BP had the better neutronic performance than gadolinia BP in all parameters. However, Duplex BP was worse than erbia BP in the aspect of safety.

• Horticultural Science & Technology
• /
• v.34 no.2
• /
• pp.294-304
• /
• 2016

Members of the genus Brassica, which are known as oil crops or cruciferous vegetables, are widely cultivated in Canada, Australia, Asian and Europe. Because Brassica species have high yields, are well adapted to their environments, and are self-incompatible, the germplasm is abundant. Previous studies have reported abundant genetic diversity even within Brassica subspecies. In Korea, fresh cabbage leaves are eaten with roast meat, and to meet the current popular demand, new varieties are being increasingly bred. To determine the genetic diversity and relationships among the cabbage vegetables in Korea, we evaluated the genetic variation of 18 accessions based on 5S and 18S ribosomal RNA (rRNA) gene sequences. We detected many variable nucleotide sites, especially in the 5S rRNA gene sequences. Because the length of the 18S rRNA gene might influence the dissimilarity rate statistics, we used both the 5S and 18S sequences to analyze the phylogenetic relationships. S7 (B. oleracea) showed the most distant phylogenetic relationship with the other Brassica species. Interestingly, B2 (B. oleracea), B15, and B18 (B. campestris) have three different types of leaf profiles, and were divided into one group, and the other Brassica species formed another group. Statistical analysis of interspecies and intraspecies genetic distances revealed that B. campestris L. showed higher genetic diversity than B. oleracea L. This work provides additional data that facilitates the evaluation of the genetic variation and relationships among Brassica species. The results could be used in functional plant breeding programs to improve Brassica crops.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.21-33
• /
• 2016

Purpose: In order to ensure that vegetable seedlings (with a soil block around their roots) are planted in an upright orientation after metering in a vegetable transplanter, they need to be dropped freely from a certain height. The walk-behind hand-tractor-powered machines do not have sufficient space to drop the seedlings from that height. In the present work, a hopper-type planting device was developed for the walk-behind hand-tractor-powered vegetable transplanter to ensure that the soil block seedlings are planted in an upright orientation. Methods: Various dimensionless terms were developed based on the dimensional analysis approach, and their effect on the planting of soil block seedlings in an upright orientation (planting efficiency) was studied. The optimum design dimensions of the hopper-type planting device were identified by the Taguchi method of optimization. Results: The ratio of the height of free fall to the sliding distance of the seedling on the surface of the hopper had the highest influence on planting efficiency. The planting efficiency was highest for plants with a height $15{\pm}2cm$. The plant handling Froude number, in interaction with the design of the hopper-type planting device, also significantly affected the planting efficiency. Of the hopper design factors, the length of the slide of the seedlings on the surface of the hopper was most important, and induced sufficient velocity and rotation to cause the seedling to fall in an upright orientation. An evaluation of the performance of the planting device under actual field conditions revealed that the planting efficiency of the developed planting device was more than 97.5%. Conclusions: As the seedlings were fed to the metering device manually, an increase in planting rate increased missed plantings. The planting device can be adopted for any vegetable transplanter in which the seedlings are allowed to drop freely from the metering device.