• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.445-457
• /
• 2021

In previous studies, it was confirmed that through the in-situ production of precast concrete members, costs could be reduced by 14.5-39.4% compared to in-plant production. In particular, it was confirmed that the factory owner did not make a contract if it did not earn more than 20% of the production cost. If precast concrete members are produced in-situ under the same conditions, the quality equivalent to that of factory production can be secured. As it is advantageous in terms of cost and quality, precast concrete members must be produced in-situ. However, it is difficult to produce all quantities in-situ due to time and various other constraints. This is because in-situ production is avoided due to anticipated risks during the project management process. However, if the risk factors are analyzed before performing in-situ production of precast concrete members, it will increase the opportunity for in-situ production. Therefore, this study develops a checklist for evaluating the risk of in-situ production of precast concrete members. By applying the checklist to one case site, it was verified that risk factors can be evaluated easily and quickly. As a result, it was analyzed that sites with a high building coverage ratio are classified as high-risk sites because it is difficult to secure usable area for production and storage. The developed checklist efficiently evaluates the risk factors of in-site production, and makes it possible for the operator to determine the risk factors, which can change frequently during project execution, and respond according to the situation.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.2
• /
• pp.135-146
• /
• 2020

In the strawberry cultivation areas and domestic farms, two-spotted spider mites are the most serious pests. It decreases the product yield due to the direct feeding of chlorophyll by the mites resulting in reduced photosynthetic ability of host plant. In this study, a simplified acaricidal effect evaluation system (SAEES) was employed to choose the effective acaricidal products among 10 items based on leaf-dipping bioassay methods. SAEES had the advantage of being able to screen four commercial products with three replications at the same time in the recommended concentration. The susceptible strains (SL_YS) showed a high mortality rate of about 90-100%, whereas the mortality of local strains was differed by each acaricides. It suggests that the acaricide responses of field populations might differ due to spray frequencies and acaricide product. An efficacy index (0.8-1.0) was determined based on the mortality of susceptible strain, which would allow the most effective commercial products to be selected by the range of this index. In summary, SAEES will enable the selection of effective commercial products and contribute to increasing control against T. urticae in strawberries.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.276-284
• /
• 2022

In this study, performance evaluation and rheological characteristics were analyzed for recycling the fine powder of nuclear power plant dismantled waste concrete as a solidifying agent for radioactive waste disposal. The radioactive concrete fine powder was used to prepare a simulated sample, and the test specimen was prepared using Di-water, CoCl₂, and 1 mol CsCl aqueous solution as mixing water. Regardless of the aggregate mixing ratio and the type of mixing water, it satisfies the performance standard of 3.45 MPa for compressive strength at 28 days of age. All specimens satisfied the criteria for submersion strength, and the thermal cycle compressive strength satisfies the criteria for all specimens except Plain-50. As a result of evaluating the rheological properties of the solidifying agent, it was found that the increase in the aggregate mixing rate decreased the yield stress and plastic viscosity. The leaching index for cobalt and cesium of all specimens was 6 or higher, which satisfies the standard. In order to secure the stable performance of the solidifying agent, it is considered effective to use 40 % or less of the aggregate component in the solidifying agent.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.211-220
• /
• 2021

Land Surface Temperature (LST) is one of the useful parameters to diagnose the growth and development of crop and to detect crop stress. Unmanned Aerial Vehicle (UAV)-based LST (LSTUAV) can be estimated in the regional spatial scale due to miniaturization of thermal infrared camera and development of UAV. Given that meteorological variable, type of instrument, and surface condition can affect the LSTUAV, the evaluation for accuracy of LSTUAV is required. The purpose of this study is to evaluate the accuracy of LSTUAV using LST measured at ground (LSTGround) under various meteorological conditions and growth phases of garlic crop. To evaluate the accuracy of LSTUAV, Relative humidity (RH), absolute humidity (AH), gust, and vegetation index were considered. Root mean square error (RMSE) after minimizing the bias between LSTUAV and LSTGround was 2.565℃ under above 60% of RH, and it was higher than that of 1.82℃ under the below 60% of RH. Therefore, LSTUAV measurement should be conducted under the below 60% of RH. The error depending on the gust and surface conditions was not statistically significant (p-value < 0.05). LSTUAV had reliable accuracy under the wind speed conditions that allow flight and reflected the crop condition. These results help to comprehend the accuracy of LSTUAV and to utilize it in the agriculture field.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.877-887
• /
• 1995

YGN 3 is the first nuclear power plant to use the Core Protection Calculator (CPC) as the core protection system and the Core Operating Limit Supervisory System (COLSS) as the core monitor-ing system in Korea. The CPC is designed to provide on-line calculations of Departure from Nucleate Boiling Ratio (DNBR) and Local Power Density (LPD) and to initiate reactor trip if the core conditions exceed the DNBR or LPD design limit. The COLSS is designed to assist the operator in implementing the Limiting Conditions for Operation (LCOs) in Technical Specifications for DNBR/Linear Heat Rate (LHR) margin, azimuthal tilt, and axial shape index and to provide alarm when the LCOs are reached. During YGN 3 initial startup testing, extensive CPC/COLSS related tests ore peformed to ver-ify the CPC/COLSS performance and to obtain optimum CPC/COLSS calibration constants at var, -ious core conditions. Most of test results met their specific acceptance criteria. In the case of missing the acceptance criteria, the test results ore analyzed, evaluated, and justified. Through the analysis and evaluation of each of the CPC/COLSS related test results, it can be concluded that the CPC/COLSS are successfully Implemented as designed at YGN 3.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2875-2880
• /
• 2024

The development of nuclear power plants is in three phases. The first phase is a consideration before the decision on the NPP construction program is approved, the second phase is the preparatory work for making contracts and preparing for the construction of NPP after the NPP construction policy is approved, and the third phase is contracting, licensing and building the first NPP. As a volcanically active country, Indonesia contains over 130 active volcanoes that are part of the Pacific Ring of Fire. The volcanic aspect is one of the safety factors considered while deciding the location of an NPP. Research on the potential of natural external risks to the determination of nuclear power plants in Indonesia, including the volcanic aspect, has been conducted based on the safety reference or safety guide of the IAEA and the Nuclear Energy Regulatory Body (BAPETEN) Regulation. Due to technological advancements, safety needs have evolved so the existing Indonesia National Standard (SNI) must be updated to comply with BAPETEN regulations. The substance in SNI 18-2034-1990 relating to volcanic features seems less relevant in actual conditions, given that more complete and exact criteria for determining a site guarantee the safety and health of residents and surrounding the environment site. The study intends to conduct a gap analysis of volcanic issues in SNI and volcanic regulations. The method used is identification requirements for volcanic aspects in SNI 18-2034-1990 about Determining Site of Nuclear Reactor Guidance with BAPETEN Chairman Regulation (BCR) number 4 of 2018 about Nuclear Installation Site Evaluation Safety Provisions and BCR number 5 of 2015 about Evaluation of Nuclear Installation Sites for Volcanic Aspects, and analysis uses a qualitative method of inductive techniques. The outcome of this research applies to suggesting a revision of SNI number 18-2034-1990, especially the volcanic aspect.

• Biomolecules & Therapeutics
• /
• v.18 no.2
• /
• pp.197-204
• /
• 2010

To establish the anti-inflammatory activity of the total flavonoid fraction of the root barks of Broussonetia papyrifera (EBP) and a new formula, the ethanol extract of the root barks of B. papyrifera was fractionated with ethylacetate, yielding the hydrophobic prenylated flavonoid-enriched fraction. EBP and the ethanol extract of the whole Lonicera japonica (ELJ) plant were then mixed at a ratio of 1:1 (w/w) to give a new preparation (BL) in the hope of obtaining an optimal formula with a higher anti-inflammatory activity. Evaluation of the effects of these preparations on A23187-treated rat basophilic leukemia (RBL-1) cells revealed that EBP potently inhibited 5-lipoxygenase (5-LOX), while ELJ showed weak inhibition. Additionally, the mixture (BL) clearly showed stronger inhibitory effects against 5-LOX than either preparation alone. These preparations also inhibited cyclooxygenase-2-catalyzed $PGE_2$ and inducible nitric oxide (NO) synthase-catalyzed NO production by lipopolysaccharide-treated RAW 264.7 cells. When tested against arachidonic acid-induced mouse ear edema, EBP showed strong inhibitory activity at doses of 5-200 mg/kg when administered orally, but BL had obviously stronger inhibitory effects. When tested against ${\lambda}$-carrageenan-induced paw edema in mice, BL showed a potent and synergistic anti-inflammatory effect. In addition, in the acetic acid-induced writhing test, BL was found to have strong analgesic activity at 50-400 mg/kg. Taken together, these results indicate that each of these preparations exert anti-inflammatory activity in vitro and in vivo. In particular, BL showed stronger anti-inflammatory activity than EBP, and these anti-inflammatory effects were partially related to the inhibition of eicosanoid and NO production. BL may be useful for the treatment of human inflammatory disorders.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.2
• /
• pp.10-23
• /
• 2000

The purpose of this research was to investigate water spaces such as marshes and watercourses, especially focusing on methods to establish eco-ponds. Many aqua-ecosystems have been filled up or destroyed in the process of rapid industrialization and urbanization in the cities. This inquiry was done by comparing, studying and analyzing existing ponds and studying documents on the introduction and methods of making eco-ponds. Existing ponds were put into three categories as the either eco-pond, man-made/natural ponds, or man-made ponds. Three instances were selected for each category, totaling nine. Data on the size and shape, depth, waterproofing techniques, water supply, plants and planting plan, and the maintenance of the ponds was collected and compared. The following are conclusions based on comparing, studying and analyzing these existing ponds, and studying documents on the introduction and methods of making eco-ponds. ${\cdot}$ It is noteworthy that different environments and depths must be provided because these are main variants contributing to attracting plants in the ponds. ${\cdot}$ In these places plants emerged, such as, floating-leaved plants, free-floating planktonic plants, submerged plant etc, in the different water level zones, once these various conditions were provided. ${\cdot}$ Various spaces can be used for shelter, places for relaxation and habitation. ${\cdot}$ After establishing a pond, routine maintenance is necessary for preventing eutrophication. However the minimal possible management should be done to maintain a natural status.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.437-448
• /
• 2015

In this paper, smartphone based measuring device was developed by integration of several sonsors such as moving, temperature, pulsation, respiration and hearing and sever/client programs was developed for the data acquisition and communication between smartphone and server computer. Then, the concept of CSI(combined safety index) was proposed for the comprehensive diagnositcs of workers status. For the validation of the proposed concept, the real data was acquired by boarding at training ship of korea maritime and ocean university. The acquired data was analyzed with the stochastical method of regressionn, then the meaningful result was driven that could explain the relation between the risky situation and the measured chronical data.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.128.2-128.2
• /
• 2010

For stationary 1kW-class fuel cell systems to be used widely, it is essential to achieve dramatic improvements in system durability as well as cost reduction. In order to address this engineering challenge, it is important to develop innovative technologies associated with BOP components. According to this background, in 2009, the Korean Government and "Korea Institute of Energy Technology Evaluation and Planning(KETEP)" launched into the strategic development project of BOP technology for practical applications and commercializations of stationary fuel cell systems, named "Technology Development on Cost Reduction of BOP Components for 1kW Stationary Fuel Cell Systems to Promote Green-Home Dissemination Project". The objectives of this project are to develop fundamental technologies to meet these requirements, and to improve the performance and functionality of BOP components with reasonable price. The project consortium consists of Korea's leading fuel cell system manufacturers, BOP component manufacturers which technologically specialized, and several research institutions. This paper is to provide a summary of the project, as well as the achievements made through the 1st period of the project(2009~2010). Several prototypes of BOPs - Cathode air blowers, burner air blowers, preferential oxidation air blowers, fuel blowers, cooling water pumps, reformer water pumps, heat recovery pumps, mass flow meters, valves and power conditioning systems - had been developed through this project in 2010. As results of this project, it is expected that a technological breakthrough of these BOP components will result in a substantial system cost reduction.