• Plant Resources
• /
• v.3 no.3
• /
• pp.206-210
• /
• 2000

A total of 20 soybean recommended varieties which were developed until late 1980's in Korea was evaluated at Suwon. Comprehensive evaluation and correlation analysis were conducted on the agronomic characters. Great variations were found in these genotypes for branch number, pod number, and grain yield per plant. The variation in number of pods/plant ranged from 53 to 164, and in grain yield from 25.9 to 68.8 g. The coefficient of variation for most of the characters had a wide range. In correlation coefficient, grain yield per plant showed a positive phenotypic association with weight of pods, pod number of branches, and weight of stem. Multiple regression analysis was done to formulate selection criteria. It indicated that stout and medium-stature genotypes with more branches, resulting in varieties with more pods per plant but with medium-size seeds are available to obtain high-yielding varieties.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.958-961
• /
• 2004

This paper presents a plant control panel model for the analysis. Seismic qualification analysis for the plant control panel is carried out to confirm the structural integrity under the seismic conditions represented by required response spectra(RRS). For the analysis finite element method(FEM) is used. And mode combinations are adopted to obtain the reliability of the spectrum analysis. The analysis results shows that the plant control panel system is designed as a dynamically rigid assembly, without any resonance frequency below 33Hz. The calculated stress of the plant control panel system is much less than yield stress of used steel.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2017.11a
• /
• pp.52-53
• /
• 2017

• Korean Journal of Veterinary Research
• /
• v.54 no.4
• /
• pp.257-260
• /
• 2014

A calf suffering from diarrhea was admitted to the Animal and Plant Quarantine Agency for diagnostic evaluation. Postmortem examination revealed that the mesenteric lymph node was enlarged and small intestine wall was thin. Microscopically, a large number of small round organisms were attached to the small intestine villi. Villous atrophy and proprial neutrophil infiltration were also observed. Based on modified Ziehl-Neelsen staining, electron microscopy, and ELISA results, the calf was diagnosed with fatal cryptosporidiosis.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.1
• /
• pp.107-113
• /
• 2021

Plant Configuration Management(CM) is an activity to maintain consistency of design requirements, physical configuration, facility configuration information throughout the life cycle of the plant by systematically managing changes that occur during the plant design and operation process. Conformity between information must be ensured not only in the design stage, but also in the case of design changes in the operation and maintenance stages, and thus a computer system capable of efficiently managing them is required. In particular, in consideration of an application to small and medium-sized domestic plants, a computer system that can support configuration management at a low cost is needed. Accordingly, in this study, a configuration management system has been developed to support the management of plant design information and change procedures in the operation stage of small and medium-sized plants. Here, a case for quantitatively evaluating the effectiveness of the developed system is described.

• Journal of the Korean Institute of Gas
• /
• v.20 no.3
• /
• pp.52-58
• /
• 2016

In this study, evaluation method for LNG plant FEED is suggested and its validity is confirmed using a well-known decision making technique of Analytic Hierarchy Process (AHP). It is a pairwise comparison technique which can be used when multiple options must be considered for a single decision making problem. In order to develop an objective decision methodology, various decision parameters, sub-parameters as well as the concept of scale of assessment were introduced, and its consistency among these parameters was also checked by calculating the consistency index (C.I.). The methodology suggested in this article will contribute in evaluation of LNG plant FEED with less bias and subjectivity associated with the decision making procedure.

• International Journal of Quality Innovation
• /
• v.6 no.1
• /
• pp.58-73
• /
• 2005

The objective of this study is to evaluate the equipment risk before and after SEMI S2-93A implementation, thus providing a guideline for safety improvement. Semiconductor Plant A located in Taiwan's Hsinchu Science Based Industrial Park with 147 manufacturing machines was used for risk assessment. This study was carried out in three steps. First, a preliminary hazard analysis was conducted. A detailed process safety evaluation was conducted (Hazard and Operability Study, HAZOP); and finally, the equipment risk comparison before and after Semiconductor Equipment Manufacturing Instruction (SEMI S2-93A) implementation. The preliminary hazard analysis results showed high risk in 21.77% of the manufacturing machines under risk assessment at Plant A. The largest percentage existed in the Diffusion Department. The machine types specified by the hazardous work site review and inspection according to Article 26 of Labor Inspection Regulation (the machines that use such chemicals as, $SiH_4$, HF, HCL, etc. and that are determined to be highly hazardous through preliminary hazard analysis) were added to the detailed process analysis and evaluation. In the third part of this evaluation, the machines at Plant A used for detailed process safety assessment were divided into two groups based on the manufacturing data before and after 1993. The severity, possibility, and actual accident analysis before and after SEMI S2-93A implementation were compared. The Semiconductor Equipment Manufacturing Instruction (SEMI S2-93A) implementation can reduce the severity and possibility of hazard occurrence.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.2
• /
• pp.83-89
• /
• 2005

The historical changes of seeding work in Japan, the typical slope revegetation method, is possible to divide into five periods as follows; 1) The early period after creation(1927-1948) 2) The spreading period of modern revegetation work with manpower(1947-1958) 3) The spreading period of rapid revegetation technique using exotic grasses with machineries(1959-1985${\dots}$) 4) The spreading period of rapid reforestation technique by fast growing species mainly using leguminous shrub species(1986-1995${\dots}$) 5)The developing period of nature restoration technique using endemic arborous species(1996-) The evaluation basis of vegetated condition after slope seeding has been described to a official guide book, "The Standards of Slope Stabilizing Works" It was mainly revised three times after first edition in 1972, and also the point of evaluation basis changed from the vegetation coverage to the density of woody plant through the 3rd period and the 4th period Recently main purpose of slope seeding has been developing from the erosion protection to the nature restoration in the current of the 5th period, and "The tentative guidelines of slope nature restoration" was announced by The Slope Revegetation Section of Japanese Society of Revegetation Technology in 2004. It was proposed the planning techniques of using suitable seeds/plants based on the preservation level at the real each construction sites Consequently, at present the importance of advanced monitoring methods for vegetation maintenance and plant sociologic survey to evaluate the plant succession is increasing.

• Journal of Environmental Science International
• /
• v.17 no.8
• /
• pp.857-869
• /
• 2008

The objective of this research is to apply more scientific, quantitative methods and procedures of environmental investigation to the development of the natural environment and the improvement of the human environment during the establishment of a sewage treatment plant and special facilities using environmental accounting. This research was performed to develop a method of strategic environmental assessment on the operation of sewage treatment plant and reuse of shellfish seeding areas through the use of environmental accounting based on EMERGY evaluation. The result was applied to marine environment policy in order to evaluate the real wealth of the regional environment and economy for both the present phase and the proposed developed phase. Using results from the comparison of EMERGY indices between the present situation and future scenarios, cost benefit analysis was performed for three different scenarios: (I) construction of a new sewage treatment plant, (2) relocation and recovery of the shellfish seeding area, and (3) relocation and re-seeding of shellfish area and construction of a new sewage treatment plant. Cost-benefit ratios of the three scenarios are 1.88, 0.94, and 1.38, respectively.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.3
• /
• pp.245-253
• /
• 2014

This research analyzed the current situation and problems with an environmental impact assessment to provide a rational ocean physics assessment technique for power plant thermal effluent. This research also tried to create an improvement plan for heated effluent diffusion impact assessment by examining the reporting regulations for environmental impact assessment, national and international evaluation guidelines, etc. In the case of evaluating the oceanographic impact of heated effluent discharged from power plants, a pre-investigation is necessary before a full-scale presentence investigation, to accurately predict and minimize power plant construction effects on the surrounding environments. Before this presentence investigation, moreover, an integrated presentence plan, which agrees with the business plan, effect prediction, and post-investigation, needs to be established. A sufficient summit investigation must be made, which considers climate changes, and new and additional power plant construction. For accurate long-term oceanic environmental change prediction, the credibility of effect prediction must be elevated by presenting an evaluation method that is categorized by numerical organization models, verification methods, result presentation, and other things. Furthermore, unproductive conflicts between the people involved in heated effluent evaluation should be reduced by these improvement plans.