• Journal of Korea Game Society
• /
• v.10 no.1
• /
• pp.15-23
• /
• 2010

In action games such as shooting games or platform games, dodging enemy objects is crucial since the player character dies or loses energy when it collides with any enemy object. In this paper, we investigates how the difficulty of these games changes according to the existence of salient objects. Since salient objects attract the player's attention, other non-salient objects may be unattended by the player, resulting in failing to dodge them. We experimented on the influence of salient objects on the difficulty of a game, and found out that the subjects who played the game without salient objects performed better than the subjects who played the game with salient objects. This paper investigates a human perceptual issue that could affect the game difficulty and suggest a potential guideline for game design and planning.

• Land and Housing Review
• /
• v.3 no.1
• /
• pp.97-109
• /
• 2012

For the design of underpass structures, -1.0m(G.L) ground water level guideline for the design of railway, subway, utility tunnel etc, is still being used in Korea. As a result, the underpass structure can be forced by buoyancy, and therefore the in-situ buoyancy anchor method is usually being applied to prevent the uplifting force. For the Yeongjongdo sky city project, the drainage method was applied to remove the buoyancy force. In this study we estimate the efficiency and safety of the applied design and propose the detailed guidelines for standard design and maintenance of the guided drainage technique. Especially, the auxiliary pumping well was operated to maintain the ground water level around the underpass. In the study site, the applied guided drainage method has advantages in both engineering and economic aspects.

• Journal of Korean Dental Science
• /
• v.7 no.2
• /
• pp.66-79
• /
• 2014

Purpose: To analyze the amount and pattern of tooth movement and the changes in arch dimension of mandibular dentition after orthodontic treatment using a new three-dimensional (3D)-indirect superimposition method. Materials and Methods: The samples consisted of fifteen adult patients with class I bialveolar protrusion and minimal anterior crowding, treated by extraction of four first premolars with conventional sliding mechanics. After superimposition of 3D-virtual maxillary models before and after treatment using best-fit method, 3D-virtual mandibular model at each stage was placed into a common coordinate of superimposition using 3D-bite information, which resulted in 3D-indirect superimposition for mandibular dentition. The changes in mandibular dental and arch dimensional variables were measured with Rapidform 2006 (INUS Technology). Paired t-test was used for statistical analysis. Result: The anterior teeth moved backward, displaced laterally, and inclined lingually. The posterior teeth showed statistically significant contraction toward midsagittal plane. The amounts of backward movement of anterior teeth and forward movement of posterior teeth showed a ratio of 6 : 1. Although the inter-canine width increased slightly (0.8 mm, P<0.05), the inter-second premolar, inter-first molar, and inter-second molar widths decreased significantly with similar amounts (2.2 mm, P<0.05; 2.3 mm, P<0.01; 2.3 mm, P<0.001). The molar depth decreased (6.7 mm, P<0.001) but canine depth did not change. Conclusion: A new 3D-indirect superimposition of the mandibular dentitions using best-fit method and 3D-bite information can present a guideline for virtual treatment planning in terms of tooth position and arch dimension.

• Journal of Environmental Science International
• /
• v.20 no.11
• /
• pp.1383-1394
• /
• 2011

Environmental impacts of suspended solids (SS) released in coastal area by dredging, reclamation and construction can cause serious damages to coastal habitats and benthic organisms. Acute toxicity tests (4-7 days) were conducted to identify the relationship between SS concentration and mortality of three marine benthic species; benthic copepod (Tigriopus japonicus) adult, Pacific abalone (Haliotis discus hannai) spat, and olive flounder (Paralichthys olivaceus) fry. Benthic copepod was the most sensitive to SS followed by olive flounder fry and Pacific abalone spat, with an $LC_{50}$ (lethal concentration of 50% mortality) value of 61.0 mg/L and LOEC (lowest observed effective concentration) value of 31.3 mg/L for benthic copepod. LOEC and 7 day-$LC_{50}$ for Pacific abalone spat were 500.0 mg/L and 1887.7 mg/L, and those for olive flounder fry were 125.0 mg/L and 156.9 mg/L, respectively. The tolerance limits of the test species to SS revealed the various concentration ranges of SS, which reflects the physiology and ecology of the test species. These results are very valuable for the determination of SS concentration of effluents released into the coastal area by dredging, reclamation and construction etc. Also, sharp increase of SS can cause long-term damages to the benthic and sessile fauna by blanketing of benthic substratum. These experimental procedures for marine bioassay and acute toxicity results can be a useful guideline for practical management planning of SS discharge into coastal area.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.15 no.4
• /
• pp.23-31
• /
• 2009

The needs of integrated play and space for both healthy children and children with Disabilities is increasing due to positive effect of integrated play. However, existing plan of play space have not considered children with Disabilities as the user and Integrated Perspective what children and children with Disabilities can do together is insufficient. For these reasons, establishing guideline of the Barrier Free Play Space and Model Development is required to meet the New Paradigm's demands. The purpose of this research is to deduce present condition and problem of play space through the Actual Condition Analysis of domestic Play Space. This study have given careful consideration to the actual condition of play space for 3 types by Types of Installation method. As a result, there are many problems from research point of view and facilities for the disablilities too. Consequently, element of plan and facilities for the disabled which are problems should be shown the direction focused improvement, moreover major task is build a barrier free play space as a place of social integration.

• IE interfaces
• /
• v.23 no.4
• /
• pp.311-318
• /
• 2010

In the daily multi-reservoir operating problem, monthly storage targets can be used as principal operational guidelines. In this study, we tested the use of a simple back-propagation Artificial Neural Network (ANN) model to derive monthly storage guideline for daily Coordinated Multi-reservoir Operating Model (CoMOM) of the Han-River basin. This approach is based on the belief that the optimum solution of the daily CoMOM has a good performance, and the ANN model trained with the results of daily CoMOM would produce effective monthly operating guidelines. The optimum results of daily CoMOM is used as the training set for the back-propagation ANN model, which is designed to derive monthly reservoir storage targets in the basin. For the input patterns of the ANN model, we adopted the ratios of initial storage of each dam to the storage of Paldang dam, ratios of monthly expected inflow of each dam to the total inflow of the whole basin, ratios of monthly demand at each dam to the total demand of the whole basin, ratio of total storage of the whole basin to the active storage of Paldang dam, and the ratio of total inflow of the whole basin to the active storage of the whole basin. And the output pattern of ANN model is the optimal final storages that are generated by the daily CoMOM. Then, we analyzed the performance of the ANN model by using a real-time simulation procedure for the multi-reservoir system of the Han-river basin, assuming that historical inflows from October 1st, 2004 to June 30th, 2007 (except July, August, September) were occurred. The simulation results showed that by utilizing the monthly storage target provided by the ANN model, we could reduce the spillages, increase hydropower generation, and secure more water at the end of the planning horizon compared to the historical records.

• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.145-154
• /
• 2003

By optimizing the radiation protection the collective dose and individual dose could be reduced during YGN #4 $5^{th}$ outage in 2001. The collective doses for the two high radiation jobs decreased to 85% and 65% of expected doses. The proportion of workers with low dose (below 1mSv) exposure increased 4% while the proportion of workers with over 3mSv and 5mSv exposure are decreased to 2%, 1% respectively. But none is exposed over 8mSv for the annual dose. To aid decision of utilizing the robot, cost- benefit analysis was performed and reasonable point was proposed to use the robot. For the first time job, repeated ALARA meeting and mock up training were implemented to set up working procedure by identifying the trouble. To easily set up standard procedure, mockup process was videotaped and reviewed during ALARA meeting. Monitoring is a good approach to chase radiological working condition such as working time, dose rate. behavior of workers, especially for high radiation work. Those data were estimated and adjusted from the stage of work planning to mock up. At the stage of actual work the monitoring data were compared to the estimation and recorded to database. This database will not only be used as a powerful tool for dose optimization at the following outage but also as a guideline to dose constraint set up for optimization for each specific situation.

• Journal of KIBIM
• /
• v.6 no.3
• /
• pp.1-14
• /
• 2016

The usage of Building Information Modelling (BIM) in building projects has enabled improvement in project planning, implementation and collaboration process amongst various stakeholders within architecture, engineering and construction (AEC) industry. However, variations exist in the current practices of BIM implementation and coordination process in the industry. These variations result in inconsistent degree of BIM use across the construction industry. This inconsistency gives rise to several managerial and technological challenges such as data interoperability issues and purposeful integration and exchange of information within the BIM components. In order to tackle the issue, it is essential to analyse the different BIM approaches employed by the industry practitioners. BIM guidelines serve as a critical link between the BIM model, and its subsequent execution. They therefore provide the best reflection of BIM application and processes. This research paper aims to address the variations existing in BIM practices across the construction industry. It includes an extensive study of 21 existing, publicly available BIM-based guidelines in order to establish an understanding of the present state of practice and deduce issues and concerns related to them. All guidelines analysed in this paper are first categorised based on authorship and the release date for efficient comparison. The points of similarity and difference between them are thereby realized and outlined. In addition, the transition of project implementation process from traditional methods to BIM technology is also explained. The existence of inconsistencies in the BIM guidelines reviewed in this paper reflects the need of a BIM 'Code Compliance Check'. The Code Compliance Check will serve as a regulatory project guideline that will further improve the potential of BIM by incorporating a consistent BIM modelling methodology for the entire construction industry.

• KIEAE Journal
• /
• v.5 no.3
• /
• pp.41-48
• /
• 2005

Before occupation of an apartment housing, the builders are required to inform the test result of IAQ to the public. However, there is no simplified method to predict IAQ before measurement of pollutant concentration. In this study, a simplified way of predicting IAQ based on the distribution of indoor pollutant concentration is proposed. 7 different cases of air change rate have been simulated through CFD analysis to get the distribution ratio of each pollutant material and then simplified functions were used with CRIAQ1 values derived from CFD simulation to evaluate by comparing the influence of each material in the indoor pollutant concentration. Again, a lot of efforts which can improve the indoor air quality have been performed. Materials used in indoor space are labeled with their pollutant emission level. Installation of ventilation system in residential buildings will be regulated by a building codes sooner or later. But it is important to understand the fact that layout of walls, location or size of openings will influence the indoor air flow and pollutant concentration. And location of emitting material influences to indoor air pollutants distribution. But until now there is few recognition and consideration of these factors. Therefore, in this paper the effects of these factors is proved and some kind of guideline is made for designers after a comparison of typical apartment floor plan and a new type plan with their average pollutant concentration and its distribution of each room. CFD(Computational Fluid Dynamics) program was used to show the indoor air flow and pollutant concentration distribution. For this purpose, a typical $100m^2$ apartment floor plan was chosen as a case study model and several alternatives were reviewed to improve the IAQ performance. The simulation took place in the condition of natural ventilation through windows.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.4
• /
• pp.24-33
• /
• 2001

The purpose of this paper is to examine the differences of user´s satisfaction of development elements of natural recreation forest(NFR) developed by public and private bodies in order to answer the research question: What is the differences of user´s satisfaction of development elements of NFR\ulcorner After reviewing the literature, mechanism of outdoor recreation, and development elements in NRF, we constructed the conceptual framework and have formulated the hypothesis of this research. We had obtained data through a questionnaire, which surveyed 584 visitors at 10 of the 72 natural recreation forests in Korea in 1999. We have analyzed the data using he descriptive statistical method, the mean difference test, and logistic regression method. We have found that 1) all the development elements have turned out to be significantly different from the mean difference test, 2) the two elements of atmosphere and activity have turned out to be statistically significant in determining the difference of NFR developed by public and private body in logistic regression analysis while user´s satisfaction in recreational resources, facilities and service make no differences between public and private NRF, 3) the higher the degree of user´s satisfaction in atmosphere and activity at NFR, the more the NFR developed by private body, and 4) their relative contribution of atmosphere and activities on whether the NFR is developed by public or private body have been turned out to have 0.258 and 0.242 respectively, which have a similar importance. The research results suggest that a guideline for the creation of marketable NFR by public and private developer, and development of use-programs and recreational atmosphere be recommended in the planning and development process of NRF. The approach and anlaysis method adopted by this research is highly useful for an evaluation of NRF developed by the tow bodies and development of devices for increasing user´s satisfaction and marketing positioning of NRF by the tow developers. It is recommended that more empirical study on individual development elements affecting user´s satisfaction be performed in the future.