• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.864-872
• /
• 1992

Two double-exposure holograms are made in the different view angle at the same time, using laser, by overlapping before and after the static deformation. These images are transfered to the computer. The fringe patterns of holograms are recognized by image processing and each component of the displacement and strain at each point of the specimen is obtained by vector analysis, and the results were presented in the graphical form. For the verification of all the ment process, the two experimental cases, the in-plane displacement by tension load and the out-of-plane displacement by bending load, are measured. These results are compared with the exact solution.

• Journal of The Korean Astronomical Society
• /
• v.38 no.4
• /
• pp.385-414
• /
• 2005

We have searched for infrared emission from supernova remnants (SNRs) included in the Spitzer Galactic Legacy Infrared Mid-Plane Survey Extraordinaire (GLIMPSE) field. At the positions of 100 known SNRs, we made 3.6, 4.5, 5.8, and $8.0{\mu}m$ band images covering the radio continuum emitting area of each remnant. In-depth examinations of four band images based on the radio continuum images of SNRs result in the identification of sixteen infrared SNRs in the GLIMPSE field. Eight SNRs show distinct infrared emission in nearly all the four bands, and the other eight SNRs are visible in more than one band. We present four band images for all identified SNRs, and RGB-color images for the first eight SNRs. These images are the first high resolution (<2') images with comparative resolution of the radio continuum for SNRs detected in the mid-infrared region. The images typically show filamentary emission along the radio enhanced SNR boundaries. Most SNRs are well identified in the 4.5 and $5.8{\mu}m$ bands. We give a brief description of the infrared features of the identified SNRs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.991-996
• /
• 2007

Recently, a computational reconstruction method using an integral imaging technique, which is a promise three-dimensional display technique, has been actively researched. This method is that 3-D images can be digitally reconstructed at the required output planes by superposition of all of the inversely enlarged elemental images by using a hypothetical pinhole array model. However, the conventional method mostly yields reconstructed images having a low-resolution, because there are some intensity irregularities with a grid structure at the reconstructed mage plane by using square-type elemental images. In this paper, to overcome this problem, we propose a novel computational integral imaging reconstruction (CIIR) method using round-type mapping model. Proposed CIIR method can overcome problems of non-uniformly reconstructed images caused from the conventional method and improve the resolution of 3-D images. To show the usefulness of the proposed method, both computational experiment and optical experiment are carried out and their results are presented.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2086-2094
• /
• 2008

Finding a planar surface on 3D space is very important for efficient and safe operation of a mobile robot. In this paper, we propose a method using a plane detection cell (PDC) and iterative randomized Hough transform (IRHT) for finding the planar region from a 3D range image. First, the local planar region is detected by a PDC from the target area of the range image. Each plane is then segmented by analyzing the accumulated peaks from voting the local direction and position information of the local PDC in Hough space to reduce effect of noises and outliers and improve the efficiency of the HT. When segmenting each plane region, the IRHT repeatedly decreases the size of the planar region used for voting in the Hough parameter space in order to reduce the effect of noise and solve the local maxima problem in the parameter space. In general, range images have many planes of different normal directions. Hence, we first detected the largest plane region and then the remained region is again processed. Through this procedure, we can segment all planar regions of interest in the range image.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.75-80
• /
• 2002

The mainly used technique to rectify satellite images with distortion is to develop a mathematical relationship between the pixel coordinates on the image and the corresponding points on the ground. By defining the relationship between two coordinate systems, a polynomial model is designed and various linear transformations are used. These GCP based geometric correction has performed overall plane to plane mapping. In the overall plane mapping, overall structure of a scene is considered, but local variation is discarded. The highly variant height of region is resampled with distortion in the rectified image. To solve this problem this paper proposed the TIN-based rectification on a satellite image. The TIN based rectification is good to correct local distortion, but insufficient to reflect overall structure of one scene. So, this paper shows the experimental result and the analysis of each rectification model. It also describes the relationship GCP distribution and rectification model. We can choose a geometric correction model as the structural characteristic of a satellite image and the acquired GCP distribution.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.3
• /
• pp.49-60
• /
• 2016

Soil failure is initiated and preceded by forming and progressing of shear band, defined as the localization of deformation into thin zones of soil mass. To understand the failure mechanism of normally consolidated cohesive soil, the spatial distribution and evolution of deformation within the entire specimen need to be evaluated. In this study, vertical compression tests under plane strain condition were performed on reconstituted kaolinite specimens, while capturing digital images of the specimen at regular intervals during shearing. Overall stress-strain behavior from initial to post peak has been analyzed together with spatial distributions of deformations and shear band characteristics from digital images at 4 stages.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.10 no.1
• /
• pp.65-72
• /
• 2010

For developing navigation system of total hip arthroplasty (THA) and evaluating hip joint kinematics, 3-D pose position of the femur and acetabulum in the pelvic coordinate system has been quantified. The pelvic coordinate system is determined by manually indicating pelvic landmarks in multidetector-row computed tomography (MDCT) images. It includes intra- and inter-observer variability, and may result in a variability of THA operation or diagnosis. To reduce the variability of pelvic coordinate system determination, this paper proposes an automated method in MDCT images. The proposed method determines pelvic coordinate system automatically by detecting pelvic landmarks on anterior pelvic plane (APP) from MDCT images. The method calibrates pelvic pose by using silhouette images to suppress the affect of pelvic pose change. As a result of comparing with manual determination, the proposed method determined the coordinate system with a mean displacement of $2.6\;{\pm}\;1.6$ mm and a mean angle error of $0.78\;{\pm}\;0.34$ deg on 5 THA subjects. For changes of pelvic pose position within 10 deg, standard deviation of displacement was 3.7 mm, and of pose was 1.28 deg. We confirmed the proposed method was robust for pelvic pose changes.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.374-376
• /
• 1999

본 논문은 연속적인 영상에서 움직이는 물체의 광류를 예측하는데 있어서 웨이브릿과 에피폴라 평면(Epipolar-Plane Images, EPI)을 사용하여 물체의 움직임을 분석하는 기법을 제안한다. 하나의 영상에서 물체의 특징을 찾는데 2차 웨이브릿 변환이 사용되고 있으나 연적인 영상에 대한 분석에서 시간에 대한 또 하나의 변환을 해 줌으로서 움직이는 물체의 정보를 얻어낼 수 있다. 3차 웨이브릿 변환에서 유도된 데이터를 가지고 만들어지는 에피폴라 평면은 움직이는 물체의 광류를 예측하는데 있어서 기존의 방법보다 시간적으로 절약을 할 수 있다. 특히 서로 다른 방향에 대한 민감성을 보여 주는 웨이브릿 계수들은 움직이는 물체의 광류 예측에 많은 도움을 주고 있다. EPI 분석에서는 물체가 깊이 방향으로 움직이는 경우에도 물체의 각 에지들(edges)의 기울기를 분석함으로서 깊이 방향의 광류를 측정할 수 있다. 본 논문에서 제시한 3차 웨이브릿 변환과 EPI 기법의 조합으로 분석된 실험 결과와 그 전 연구들과의 비교가 마지막 부분에 서술되었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.120-127
• /
• 2003

A novel three degrees of freedom sensing method utilizing binary grid pattern image and vision camera is presented. The binary grid pattern image is designed by Pseudo-Random Binary Arrays and referenced to encode in-plane position of a moving stage of the contact-free planar actuator. First, the yaw motion of the stage is detected using fast image processing and then the other planar positions, x and y, are decoded with a sequence of images. This method can be applied to the system that needs feedback of in-plane position, with advantages of a good accuracy and high resolution comparable with the encoder, a relatively compact structure, no friction, and a low cost. In this paper, all the procedures of the above sensing mechanism are described in detail, including simulation and experiment results.

• Korean Journal of Remote Sensing
• /
• v.19 no.3
• /
• pp.247-253
• /
• 2003

The mainly used technique to correct satellite images with geometric distortion is to develop a mathematical relationship between pixels on the image and corresponding points on the ground. Polynomial models with various transformations have been designed for defining the relationship between two coordinate systems. GCP based geometric correction has peformed overall plane to plane mapping. In the overall plane mapping, overall structure of a scene is considered, but local variation is discarded. The Region with highly variant height is rectified with distortion on overall plane mapping. To consider locally variable region in satellite image, TIN-based rectification on a satellite image is proposed in this paper. This paper describes the relationship between GCP distribution and rectification model through experimental result and analysis about each rectification model. We can choose a geometric correction model as the structural characteristic of a satellite image and the acquired GCP distribution.