• 한국CDE학회논문집
• /
• 제14권2호
• /
• pp.122-128
• /
• 2009

The failure responses of adhesively bonded, hat stiffened structures are studied through numerical analysis using the finite element method. The responses are evaluated numerically for the bonded hat section/substrate structures containing different combinations of materials. It is studied what kind of material combinations causes the easier crack initiation in the structure. This study is conducted under plane strain conditions and J-integral via a commercial code ABAQUS as a total critical energy release criterion was used for observation on crack initiation. Also, the influence of adhesive on the structure is studied.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.577-582
• /
• 2000

The pseudo-volume control method is developed for the failure analysis of RC slabs, by adding pressure node into layered shell element utilizing in-plane constitutive models of reinforced concrete and layered formulation. For the failure analysis of RC slabs n this paper, geometric nonliearity is also considered in the analysis. The validity of the pseudo-volume control method is verified by comparing analysis results and existing experimental results.

• 자원환경지질
• /
• 제34권6호
• /
• pp.601-615
• /
• 2001

본 연구지역인 충북 보은군 보은읍 일대는 옥천변성대에 속하며, 도로공사구간 중 1:0.:리 구배로 절취한 암반사 면내의 일부구간에서 평면파괴가 발생하였다. 이 구간은 파괴면과 동일한 방향성을 갖는 불연속면에 의해 추가붕괴가 예상되는 등 불안정한 상태이다. 따라서, 본 사면에 대해 SMR, 평사투영법, 한계평형법으로 안전성을 해석하였다. 그러나, 이러한 방법으로 해석할 수 없는 절취에 따른 암반사면의 응력재분배 및 비선형적인 변위거동에 대해서는 UDEC 을 이용하여 수치해석하고, 보강공법을 적용하여 안정성을 해석해 보았다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.102-109
• /
• 2001

In order to take account of the statistical properties of probability variables used in the structural analysis, the conventional approach using the safety factor based on past experience usually estimated the safety of a structure. The real structures could only be analyzed with the error in estimation of loads, material characters and the dimensions of the members. But the errors should be considered systematically in the structural analysis. Structural safety could not precisely be appraised by the traditional structural design concept. Recently, new approach based on the probability concept has been applied to the assessment of structural safety using the reliability concept. Thus, the computer program by the Probabilistic FEM is developed by incorporating the probabilistic concept into the conventional FEM method. This paper estimated for the reliability of a plane stress structure by Advanced First-Order Second Moment method using von Mises, Tresca and Mohr-Coulomb failure criterions. The reliability index and failure probability of attained by the Monte Carlo Simulation method with the von Mises criterion were same as PFEM, but the Monte Carlo Simulation were very time-consuming. The variance of member thickness and load could influence the reliability and failure probability most sensitively among the design variables from the results of the parameter analysis. And proper failure criterion must be used to design safely.

• 한국지반공학회논문집
• /
• 제30권11호
• /
• pp.5-15
• /
• 2014

사면파괴로 인한 피해사례가 늘어남에 따라 사면을 안전하게 설계하고 시공하는 것은 대단히 중요하다. 현재 실무에서 주로 사용되는 한계평형해석은 간단한 계산에 의해 안전율을 산정할 수 있지만 활동면을 미리 가정한다는 단점이 있다. 한편 유한차분해석 시 전단강도감소기법을 이용하여 안전율 산정이 용이해짐에 따라 설계 시 이용되는 빈도가 점차 증가하고 있다. 따라서 본 연구에서는 두 가지 해석방법의 비교를 통해 합리적인 쏘일네일링 설계방안의 제안을 목적으로 한다. 이를 위해 평면파괴 예상구간에 쏘일네일링 보강 시 보강패턴에 따른 보강효과를 비교해보았다. 그 결과 네일의 각도와 간격에 따른 보강효과는 동일하게 나타났다. 하지만 네일 길이가 증가함에 따라 한계평형해석의 경우 안전율이 증가하였지만 유한차분해석의 경우 안전율의 변화가 없었다.

• Steel and Composite Structures
• /
• 제38권3호
• /
• pp.271-280
• /
• 2021

In this study, the fatigue property of U rib-to-crossbeam connections in orthotropic steel bridge (OSB) crossbeams under heavy traffic vehicle load was investigated considering the effects of in-plane shear stress. The applicability of an improved structural stress (ISS) method was validated for the fatigue behavior analysis of nonwelded arc-shaped cutout regions in multiaxial stress states. Various types of fatigue testing specimens were compared for investigating the equivalent structural stress, fatigue crack initiation positions, and failure modes with the unified standards. Furthermore, the implications of OSB crossbeams and specified loading cases are discussed with respect to the improved method. The ISS method is proven to be applicable for analyzing the fatigue property of nonwelded arc-shaped cutout regions in OSB crossbeams. The used method is essential for gaining a reliable prediction of the most likely failure modes under a specific heavy traffic vehicle load. The evaluated results using the used method are proven to be accurate with a slighter standard deviation. We obtained the trend of equivalent structural stress in arc-shaped cutout regions and validated the crack initiation positions and propagation directions by comparing them with the fatigue testing results. The implications of crossbeam spans on fatigue property are less significant than the effects of crossbeams.

• 한국지반공학회논문집
• /
• 제33권11호
• /
• pp.59-72
• /
• 2017

본 연구에서는 사질토 뒷채움재의 캔틸레버 옹벽에서 뒷굽 끝단 연직면에 작용하는 주동토압을 산정하는 방법을 제안하였다. 캔틸레버 옹벽에서 뒷굽길이에 따른 전단 영역의 변화는 벽체의 벽마찰력, 뒷채움 경사에 따라 뒷굽 끝단 연직면에 작용하는 주동토압에 영향을 준다. 뒷굽길이에 따라 변하는 파괴면각도를 가정하여 토압을 산정하는 한계평형법은 적용하기에 매우 복잡하므로 본 연구에서는 한계해석법을 사용하여 토압을 구하였다. 한계해석법으로 뒷굽길이에 따라 실제 파괴면각도가 고려된 토압을 정확히 산정하고, 이로부터 뒷굽 끝단 연직면에 작용하는 수평토압과 연직토압을 분석하였다. 본 연구결과에 의하면, 뒷굽길이가 짧아짐에 따라 내측 파괴면 경사각은 이론식보다 증가한 반면에 외측 파괴면 경사각은 영향을 받지 않았다. 뒷굽 끝단의 연직면에 작용하는 배면마찰각은 지표면 경사각과 벽면마찰각 사이의 값을 나타내었으며, 주동토압 또한 감소하였다. 최종적으로 상대적인 뒷굽길이와 뒷굽 끝단의 연직면에 작용하는 마찰각(연직토압/수평토압의 비)의 상관관계를 사용함으로써 Coulomb 토압을 간편하게 산정할 수 있도록 하였다.

• Structural Engineering and Mechanics
• /
• 제36권3호
• /
• pp.247-278
• /
• 2010

The study of the seismic vulnerability of masonry buildings requires structural properties of walls such as stiffness, ultimate load capacity, etc. In this article, a method is suggested for modeling the masonry walls under in-plane loading. At the outset, a set of analytical equations was established for determining the elastic properties of an equivalent homogeneous material of masonry. The results for homogenized unreinforced brick walls through detailed modeling were compared in different manners such as solid and perforated walls, in-plane and out-of-plane loading, etc, and it was found that this method provides suitable accuracy in estimation of the wall linear properties. Furthermore, comparison of the results of proposed modeling with experimental out coming indicated that this model considers the non linear properties of the wall such as failure pattern, performance curve and ultimate strength, and would be appropriate to establish a parametric study on those prone factors. The proposed model is complicated; therefore, efforts need to be made in order to overcome the convergency problems which will be included in this study. The nonlinear model is basically semi-macro but through a series of actions, it can be simplified to a macro model.

• 터널과지하공간
• /
• 제25권1호
• /
• pp.76-85
• /
• 2015

본 연구에서는 암반사면에서 실시간으로 측정된 시간에 대한 변위 자료를 분석하여 암반사면의 잠재적인 파괴시간을 예측하는 소프트웨어를 개발하였다. 소프트웨어는 파괴시간을 추정하기 위한 역속도법, 로그시간-로그속도법, 로그속도-로그가속도법, 비선형최소자승법을 적용하는 네 가지 모듈로 구성되었다. 소프트웨어는 해석모듈 및 GUI의 효율적인 구현을 위하여 VisualBasic.NET 언어를 이용하여 MS Visual Studio 플랫폼에서 제작되었다. 소프트웨어의 기능 및 성능은 기존의 실내 모형사면 실험으로 얻은 변위자료를 사용하여 검토되었으며 지수형 거동을 보이는 활동면에서 실제 파괴시간과 유사한 파괴시간을 예측하였음을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.245-253
• /
• 2017

The relative displacement of a piping system installed between isolated and nonisolated structures in a severe earthquake might be larger when without a seismic isolation system. As a result of the relative displacement, the seismic risks of some components in the building could increase. The possibility of an increase in seismic risks is especially high in the crossover piping system in the buildings. Previous studies found that an elbow which could be ruptured by low-cycle ratcheting fatigue is one of the weakest elements. Fatigue curves for elbows were suggested based on component tests. However, it is hard to find a quantitative evaluation of the ultimate state of piping elbows. Generally, the energy dissipation of a solid structure can be calculated from the relation between displacement and force. Therefore, in this study, the ultimate state of the pipe elbow, normally considered as failure of the pipe elbow, is defined as leakage under in-plane cyclic loading tests, and a failure estimation method is proposed using a damage index based on energy dissipation.