• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.156-161
• /
• 1998

We developed aerosol flame deposition method and made stress-free Pyrex-based optical waveguide on silicon substrate using this method. Zr is doped to control the refractive index of Pyrex waveguide layers. The refractive index of the film changes from 1.460 to 1.475 as the content of Zr changes from 0 to 3 wt%. Er is doped to see the possibility of applying this Pyrex waveguide as PLC-type (Planar Lightwave Circuit) optical amplifier. The refractive index of the film changes from 1.460 to 1.465 as the content of Zr changes from 0 to 1 wt%. Light launching using a prism coupler to the fabricated waveguide showed good quality for application to PLC. The polarization dependence of refractive-index of the Pyrex film is measured to be less than $2{\times}10^{-4}$.

• Journal of the Optical Society of Korea
• /
• v.7 no.3
• /
• pp.166-173
• /
• 2003

This paper presents micromachining results on planar-lightwave-circuit (PLC) chips with Si substrate and the quartz substrate by using Ti:Sapphire femtosecond-pulsed laser. The ablation process with femtosecond laser pulses generates nothing of contamination, molten zone, microcracks, shock wave, delamination and recast layer. We also showed that the micromachine for PLC using femtosecond pulsed lasers is superior to that using nanosecond pulsed lasers. The insertion loss and the optical return loss of the 1 ${\times}$ 8 optical power splitters packaged with micromachined input- and output-port U-grooves were less than 11.0 ㏈ and more than 55 ㏈, respectively. The wavelength dependent loss (WDL) was distributed within $\pm$0.6 ㏈ and the polarization dependent loss (PDL) was less than 0.2 ㏈.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.337-340
• /
• 2005

A spot-size converted Fabry-Perot laser diode (LD) was flip-chip bonded to a silica-terraced planar lightwave circuit(PLC) platform to examine the effect of the silica terrace on the heat dissipation of the LD module. From the measurement of the light-current characteristics, it was discovered that the silica terrace itself is not a strong thermal barrier, but the encapsulation of the integrated LD with an index-matching polymer resin more or less deteriorates the heat dissipation.

• ETRI Journal
• /
• v.24 no.5
• /
• pp.398-400
• /
• 2002

Using $Cr_2O_3$ thin film, we developed a novel etch-stop technique for the protection of silicon surface morphology during deep ion coupled plasma etching of silica layers. With this technique we were able to etch a silica trench with a depth of over 20 ${\mu}m$ without any damage to the exposed silicon terrace surface. This technique should be well applicable to fabricating silica planar lightwave circuit platforms for opto-electronic hybrid integration.

• Journal of the Optical Society of Korea
• /
• v.20 no.3
• /
• pp.335-342
• /
• 2016

We demonstrate an optical asynchronous transfer mode/wavelength division multiplexing (OATM/WDM) optical access network, using a router based on an optical header decoder to conduct next-generation communications. The router consists of a decoder or hardware analysis processing of the header bit and switches. The router in the OATM/WDM optical access network is a key technology by which to satisfy subscribers’ requests, including reliability, cost efficiency, high speed, large-capacity transmission, and elevated information security. In this study, we carry out experiments in which a header decoder delivers to 16 and 32 subscribers with a single wavelength in the router. These experiments confirm the decoder’s successful operation via hardware using 4 and 5 header bits. We propose that this system may significantly contribute toward the realization of an optical access network that provides high-quality service to subscribers of next-generation communications.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.841-846
• /
• 2014

This study proposes a novel optical sensor structure based on a refractometer combining a bend waveguide with an air trench. The optical sensor is a $1{\times}2$ splitter structure with a reference channel and a sensing channel. The reference channel has a straight waveguide. The sensing channel consists of a U-bend waveguide connecting four C-bends, and a trench structure to partially expose the core layer. The U-bend waveguide consists of one C-bend with the maximum optical loss and three C-bends with minimum losses. A trench provides a quantitative measurement environment and is aligned with the sidewall of the C-bend having the maximum loss. The intensity of the output power depends on the change in the refractive index of the measured material. The insertion loss of the proposed optical sensor changes from 3.7 dB to 59.1 dB when the refractive index changes from 1.3852 to 1.4452.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.103-106
• /
• 2006

We have fabricated a planar lightwave circuit (PLC) hybrid-integrated optical sub-assembly of a triplexer using a thin film filter (TFF)-attached wavelength division multiplexer (WDM) and photodiode (PD) carriers. Two types of TFFs were attached to a diced side of a silica-terraced PLC platform, and the PD carriers with a $45^{\circ}$ mirror on which pin-PDs were bonded were assembled with the platform. A clear transmitter eye-pattern and minimum receiver sensitivity of -24.5 dBm were obtained under 1.25 Gb/s operation for digital applications, and a second-order inter-modulation distortion (IMD2) of -70 dBc was achieved for an analog receiver.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.469-475
• /
• 2014

The roll to roll (RTR) imprint process is an integrated imprinting process where steps ranging from assignment of a function to a flexible rolled substrate to rewinding of the same substrate in a roll are performed. RTR imprint is a green, low-cost technology without limitations. In RTR imprint, it is important to manufacture the mold precisely and maintain uniform process condition. To this, process conditions have to include precision tension control, optimization of process parameters. We introduced RTR imprint to fabricate planar lightwave circuit (PLC) device for communication, by new schematic design and process optimization, we fabricated successfully optical device. The fabricated optical device showed the optical performance which was satisfied to meet international standard.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.219-223
• /
• 2008

To realize a widely tunable laser diode, a polymer coupled-ring reflector is hybrid- integrated with reflective semiconductor optical amplifier. Even though ring-ring and ring-bus coupling ratios are changed by fabrication errors in waveguide width and height, they remain very close to the single peak condition, ensuring high yield in fabrication. The tuning range is observed to be about 35 nm, maintaining the side mode suppression ratio of about 30 dB.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.981-987
• /
• 2016

We present a cost-effective dual polarization quadrature phase-shift coherent receiver module using a silica planar lightwave circuit (PLC) hybrid assembly. Two polarization beam splitters and two $90^{\circ}$ optical hybrids are monolithically integrated in one silica PLC chip with an index contrast of $2%-{\Delta}$. Two four-channel spot-size converter integrated waveguide-photodetector (PD) arrays are bonded on PD carriers for transverse-electric/transverse-magnetic polarization, and butt-coupled to a polished facet of the PLC using a simple chip-to-chip bonding method. Instead of a ceramic sub-mount, a low-cost printed circuit board is applied in the module. A stepped CuW block is used to dissipate the heat generated from trans-impedance amplifiers and to vertically align RF transmission lines. The fabricated coherent receiver shows a 3-dB bandwidth of 26 GHz and a common mode rejection ratio of 16 dB at 22 GHz for a local oscillator optical input. A bit error rate of $8.3{\times}10^{-11}$ is achieved at a 112-Gbps back-to-back transmission with off-line digital signal processing.