• 한국재료학회지
• /
• 제24권9호
• /
• pp.451-457
• /
• 2014

We developed a high-performance methane gas sensor based on a $SnO_2$ hollow hemisphere array structure of nano-thickness. The sensor structures were fabricated by sputter deposition of Sn metal over an array of polystyrene spheres distributed on a planar substrate, followed by an oxidation process to oxidize the Sn to $SnO_2$ while removing the polystyrene template cores. The surface morphology and structural properties were examined by scanning electron microscopy. An optimization of the structure for methane sensing was also carried out. The effects of oxidation temperature, film thickness, gold doping, and morphology were examined. An impressive response of ~220% was observed for a 200 ppm concentration of $CH_4$ gas at an operating temperature of $400^{\circ}C$ for a sample fabricated by 30 sec sputtering of Sn, and oxidation at $800^{\circ}C$ for 2 hr in air. This high response was enabled by the open structure of the hemisphere array thin films.

• 한국전자파학회논문지
• /
• 제15권11호
• /
• pp.1019-1025
• /
• 2004

직각 도파관 내의 주 모드인 TE$_{10}$ 모드의 필드 분포를 기준으로 만든 전송선 등가 모델을 바탕으로 슬롯 결합의 결합을 통해 급전하는 도파관 슬롯 배열 안테나를 설계하였다. 이를 위해 도파관 중심에 위치한 기울어진 슬롯(결합 슬롯)의 적절한 각도와 도파관 축 방향 슬롯(방사 슬롯)의 이격거리를 구해낸 후, 이를 EM 시뮬레이션을 통해 전자기적 특성을 파악하고 특성을 분석하였으며 실제 제작품 측정 결과 비교하였다. 측정된 반사손실 대역폭은 중심주파수 9.15 GHz에서 180 MHz, 부엽레벨은 -25 dB 이하, 반 전력 빔폭은 약 9$^{\circ}$, 이득은 25.5 dB이며 이러한 결과는 시뮬레이션 데이터와 유사하다.

• 한국전자파학회논문지
• /
• 제7권2호
• /
• pp.147-156
• /
• 1996

본 논문에서는 평면형 도파관 스롯 배열 안테나의 빔 조향 방정식을 제시하였다. 빔 조향시 안테나 회전축의 기움각과 개구면 분포는 가장 중요한 요소이다. 빔 조향 관련 식들로 부터 원하는 빔 방향에 대한 안테나 개구면의 위상 분포 및 주피수를 구하였다. 또한 일차원 위상 배열 안테나의 변위기에 위상 데이타릎 전달하는 고속 제어 알고리즘을 개발하였다. 제어 회로의 복잡성파 위상 전달시간을 줄이기 위해 직렬 중계에 의한 변위량 공급 방식을 제안하였다. 이 방식은 간단한 회로구조를 가지므로 복잡한 2차원 완전 위상 배열 안테나에 유용하게 쓰일 수 있을 것으로 기대된다.

• 대한전자공학회논문지TC
• /
• 제46권2호
• /
• pp.126-133
• /
• 2009

본 논문에서는 차량용 위성 안테나에 적합한 평판형 도파관 슬롯 배열 안테나를 설계 제작하였다. 제안된 안테나는 마이크로스트립 패치 배열 안테나의 유전체 손실 및 급전 라인의 손실을 대체하고자 조립하기에 간단한 3층 구조의 급전 도파관을 이용하여 고이득의 안테나를 구현하였다. 또한 얇은 단일 필름을 이용한 편파기를 사용하여 위성에서 송신한 RHCP(Right Handed Circular Polarization), LHCP(Left Handed Circular Polarization)를 기계적으로 모두 수신 가능하도록 설계 제작하였다. 제작된 4X8 배열 안테나의 이득은 27.5dB, 8X16 배열 안테나의 이득은 32dB이다.

• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1863-1872
• /
• 2001

In this Paper, we suggest the precision stage using a novel non-contact planar actuator that utilizes an interaction between an array type of air-core solenoids and permanent magnets. The former with axes arranged in the mutually orthogonal direction is fixed on the stator and the latter with the same polar direction is attached below the stage. The promising magnetic structure has little uncertainty such as hysteresis loss caused by ferromagnetic material, then it is simple to quantify the magnetic phenomenon. And all the magnetic forces are transmitted through narrow air-gap between the coil and the permanent magnet, therefore the structure can be highly compacted. Furthermore, the stage or plate can be perfectly isolated from the stator without any wire connection, leading to diminish the generating possibility of wear particles due to mechanical contact. Then. it is estimated that the proposed operating principle is very suitable for work requiring high accuracy and cleanness. or general-purpose nano stage. The main issues rebated to the plate driving are discussed here.

• Journal of Magnetics
• /
• 제12권1호
• /
• pp.40-44
• /
• 2007

The Planar Hall effect in a spin valve structure has been applied as a biosensor being capable of detecting $Dynabeads^{(R)}$ M-280. The sensor performance was tested under the application of a DC magnetic field where the output signals were obtained from a nanovoltmeter. The sensor with the pattern size of $50{\times}100{\mu}m^2$ has produced high sensitivity; especially, the real-time profiles by using that sensor revealed significant performance at external applied magnetic field of around 7.0 Oe with the resolution of 0.04 beads per $\mu m^2$. Finally, a successful array including 24 patterns with the single sensor size of $3{\times}3{\mu}m^2$ has shown the uniform and stable signals for single magnetic bead detection. The comparison of this sensor signal with the others has proved feasibility for biosensor application. This, connecting with the advantages of more stable and high signal to noise of PHR sensor's behaviors, can be used to detect the biomolecules and provide a vehicle for detection and study of other molecular interaction.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.123.1-123.1
• /
• 2010

The solid oxide fuel cell (SOFC) has attracted great deal of attention due to its high electrical efficiency, high waste-heat utilization, fuel flexibility, and application versatility. However, SOFC technology is still not matured enough to fulfill the practical requirements for commercialization. Therefore, all the research and development activities are mainly focused on a development of practically viable SOFCs with higher performance and better reliability. We were successful in fabricating high-performance anode-supported unit cells by employing hierarchically controlled multi-layered electrodes for both structural reliability and high performance. In addition, a novel composite sealing gasket made it possible to achieve excellent sealing integrity even with considerable surface irregularities in a multi-cell planar arrayed stack.

• ETRI Journal
• /
• 제27권3호
• /
• pp.250-256
• /
• 2005

A novel planar polarization-agile microstrip subarray is proposed and its performance assessed by a thorough numerical investigation. The subarray consists of five square patches with a central element, directly coupled to a pair of microstrip feed lines by a cross-shaped aperture, which spreads the power outwards to the other patches through a network of suitable connections. By properly exciting the antenna at its input ports, any kind of polarization of the radiated field can be accomplished with fairly low cross-polarization levels. Moreover, since only two feed lines are required to drive the whole subarray, polarization agility is simply and attractively achieved by a single phase-shift circuit. The design concept is described and the results of the analyses and simulations performed by two completely independent full-wave approaches are presented and discussed.

• 항공우주시스템공학회지
• /
• 제9권2호
• /
• pp.13-18
• /
• 2015

Micro planar type liquid propellant thruster was fabricated by MEMS manufacturing process for micro/nano satellites applications. 90 wt.% hydrogen peroxide was used as propellant and for propellant decomposition, Pt/Al2O3 was used as catalyst. Micro thruster structure was made by 5 photosensitive glasses patterned with thruster component profiles. Objective thrust was 50 mN and required hydrogen peroxide mass flow was 2.1 ml/min, which was supplied by syringe pump and teflon tube in experimental test. Performance test said that average steady thrust was approximately 30 mN, around 60% of objective thrust, and transient time was about 5 sec. It is estimated that extended response time was due to high thermal energy loss of micro scale thruster and low enthalpy input by propellant mass flow.

• The Journal of the Acoustical Society of Korea
• /
• 제25권1E호
• /
• pp.25-31
• /
• 2006

Two twin microphones may produce particular patterns of binaural directivity by time delays between the twin microphones. The boundary element method (BEM) was used for the simulation of the sound pressure field around the KEMAR head model in order to quantify the acoustic head effect. The sound pressure onto the microphone was calculated by the BEM to an incident sound pressure. Then a planar directivity pattern was formed by four sound pressure signals from four microphones. The optimal binaural directivity pattern may be achieved by adjusting time delays at each frequency while maintaining the forward beam pattern is relatively bigger than the backward beam pattern. The simulation results were verified by the experimental measurement.