• Journal of the Korean Home Economics Association
• /
• v.37 no.5
• /
• pp.101-110
• /
• 1999

Sarang is a man's living space or quarter for the heir and his eldest son who would succeed and a hosting place for male vistor. The purpose of this study is to extract the Sarang space terminology described in the 17 Korean novels and find its meaning by comprehending whole paragraph. The major findings were summerized as follows; 1. Among the Sarang space terminology, Sarang meant either 'Sarangchae' or 'Sarangbang'. Its exact meaning could be understood by comprehending whole paragraph. 2. Regarding to the size of Sarang space terminology, there were two kinds. One was clearly quantified terminology such as 'two kans Sarangbang' and 'One and half kans Sarang'. The other was vaguely quantified teminology such as 'large Sarang' and 'small Sarang'. 3. Regarding to the location of Sarang space terminology, 'upper Sarang and lower Sarang'. 'inner Sarang and outer Sarang', 'fore Sarang and back Sarang' were found to be used. 4. Regarding to the user of Sarang space terminology, it was for male mainly. However since 1930, some of female were also described as a user in the Korean novels.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.551-553
• /
• 2011

The popularization and development of 3D display makes common users easy to experience a solid 3D virtual reality, the demand for virtual reality contents are increasing. This paper proposes VR panorama system using vanishing point location-based depth map generation method. VR panorama using depth map gives an effect that makes users feel staying at real place and looking around nearby circumstances.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.544-546
• /
• 2011

The popularization and development of 3D display makes common users easy to experience a solid 3D virtual reality, the demand for virtual reality contents are increasing. This paper proposes VR panorama system using vanishing point location-based depth map generation method. VR panorama using depth map gives an effect that makes users feel staying at real place and looking around nearby circumstances.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.6 s.123
• /
• pp.477-483
• /
• 2007

Major noise source in high speed rotating optical disk drives (CD and DVD-ROM) arises due to the high-speed airflow produced from the upper and lower surfaces on the rotating disk. The present paper deals with the experimental approach how to identify the noise source based on the fundamental principles of aeroacoustics and to propose a reduction method of the noise source. The CD-ROM device is composed of disk, window tray, motors at the bottom place and electronic circuit plate also located below the window plate. The window is cut in the tray to read the disk information using the optical device located below the tray and moving linearly from the center of the disk through the end of the disk. All components are possible noise generators. Experimental studies were carried out in the anechoic room with various design modifications, such as tray geometry, window size and hole location on tray, to identify the major aerodynamic noise source and significant reductions of the aerodynamic noise were obtained.

• Journal of Fashion Business
• /
• v.12 no.1
• /
• pp.164-172
• /
• 2008

A face is the place where individuals can first give their images visually. This chapter presents how 'Visual optical illusion' works in applying makeup and how to differentiate the direction, location and shape of Lip in the aspect of physiognomy. For this study, employed were five types of face shape produced by Photoshop program. The best-matched facial shape was examined through a questionnaire research after applying the optical illusion of Lip to the five types of face shape. The results were revealed to be identical to ones presented in make-up teaching materials. In conclusion, it was found that well-matched shape and size of Lip could make some changes in the facial impression, changing the face shape into oval shape. The facial line can be modified and supplemented by reshaping such facial parts as the Lip, producing well-balanced facial shape. Consequently, make-up was proved to be one of the methods which can be used to create social and psychological effect which can make a favorable facial impression and individuality, natural impression and image making depending on different purposes, taking advantage of optical illusion effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4738-4744
• /
• 2011

This study proposes the system of new small sluice gate operated without the upper concrete structure. The new mechanism is composed of hydraulic system, driving mechanism to feed the floodgate up and down, hydrological locking device, safety device and etc. The hydraulic pumps and control systems away from the location of the sluice gate systems are installed and controled in place. The feed device with the hydraulic rack, pinion and hydraulic actuator is installed on the side of the sluice gate. The following results take the advantages of cost reduction, operation safety and compact product.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.105-112
• /
• 2006

Liquefaction-induced lateral spreading has been the most extensive damage to pile foundations during earthquakes. However, a case of pile failure was reported despite the fact that a large margin of safety factor was employed in their design. This means that the current seismic design method of pile is not agreeable with the actual failure mechanism of pile. Newly proposed failure mechanism of pile is a pile failure based on buckling instability. In this study, failure behavior of pile embedded in liquefied soil deposits was analyzed considering lateral spreading and buckling instability performing 1g shaking table test. As a result, it can be concluded that the pile subjected to excessive axial loads ($near\;P_{cr}$) can fail by buckling instability during liquefaction. When lateral spreading took place in sloping grounds, lateral spreading increased lateral deflection of pile and reduced the buckling load, promoting more rapid collapse. In addition, buckling shape of pile was observed. In the ease of pile buckling, hinge formed at the middle of the pile, not at the bottom. And in sloping grounds, location of hinge got loiter compared with level ground because of the effects of lateral spreading.

• Smart Structures and Systems
• /
• v.2 no.2
• /
• pp.189-208
• /
• 2006

Monitoring large-scale civil engineering structures such as offshore platforms and high-large buildings requires a large number of sensors of different types. Innovative sensor data information technologies are very extremely important for data transmission, storage and retrieval of large volume sensor data generated from large sensor networks. How to obtain the optimal sensor set and placement is more and more concerned by researchers in vibration-based SHM. In this paper, a method of determining the sensor location which aims to extract the dynamic parameter effectively is presented. The method selects the number and place of sensor being installed on or in structure by through the tolerance domain statistical inference algorithm combined with second order sensitivity technology. The method proposal first finds and determines the sub-set sensors from the theoretic measure point derived from analytical model by the statistical tolerance domain procedure under the principle of modal effective independence. The second step is to judge whether the sorted out measured point set has sensitive to the dynamic change of structure by utilizing second order characteristic value sensitivity analysis. A 76-high-building benchmark mode and an offshore platform structure sensor optimal selection are demonstrated and result shows that the method is available and feasible.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.903-908
• /
• 2006

Building energy simulation has become a useful tool for predicting cooling, heating and air-conditioning loads for facilities. It is important to provide building energy performances feed back to the mechanical and electrical system operator and engineer for energy conservation and maintenance of building. From this research, we set up the typical weather data of location, basic description of building, geometric modelling data and the specification of Installed primary HVAC system for establishing the simulation model about energy consuming that take place in multipurpose building complex. The simulation tool of building energy - EnergyPlus (DOE and BLAST based simulation S/W), it has been used and accomplished calculations and analyses for evaluating the effect of the system types and operating condition of central HVAC plant on the building energy consumption. In this paper, we offer comparison and simultaneous results those involve electricity consumption pattern and amount between actual operation versus EnergyPlus simulation to the object building during summer season.

• International journal of advanced smart convergence
• /
• v.10 no.4
• /
• pp.278-288
• /
• 2021

Recently, IoT systems are cloud-based, so that continuous and large amounts of data collected from sensor nodes are processed in the data server through the cloud. However, in the centralized configuration of large-scale cloud computing, computational processing must be performed at a physical location where data collection and processing take place, and the need for edge computers to reduce the network load of the cloud system is gradually expanding. In this paper, a cluster system consisting of 6 inexpensive Raspberry Pi boards was constructed to perform fast data processing. And we propose "Kubernetes cluster system(KCS)" for processing large data collection and analysis by model distribution and data pipeline method. To compare the performance of this study, an ensemble model of deep learning was built, and the accuracy, processing performance, and processing time through the proposed KCS system and model distribution were compared and analyzed. As a result, the ensemble model was excellent in accuracy, but the KCS implemented as a data pipeline proved to be superior in processing speed..