• Current Optics and Photonics
• /
• v.4 no.5
• /
• pp.428-433
• /
• 2020

Recently, the on-chip autofocus (AF) function has become essential to the CMOS image sensor. An auto-focus usually operates using phase detection of the photocurrent difference from a pair of AF pixels that have focused or defocused. However, the phase-detection method requires a pair of AF pixels for comparison of readout. Therefore, the pixel variation may reduce AF performance. In this paper, we propose a color-selective AF pixel with a plasmonic nanostructure in a 0.9 μ㎡ pixel. The suggested AF pixel requires one pixel for AF function. The plasmonic nanostructure uses metal-insulator-metal (MIM) stack arrays instead of a color filter (CF). The color filters are formed at the subwavelength, and they transmit the specific wavelength of light according to the stack period and incident angles. For the optical analysis of the pixel, a finite-difference time-domain (FDTD) simulation was conducted. The analysis showed that the MIM stack arrays in the pixels perform as an AF pixel. As the primary metric of AF performance, the resulting AF contrasts are 1.8 for the red pixels, 1.6 for green, and 1.5 blue. Based on the simulation results, we confirmed the autofocusing performance of the MIM stack arrays.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1383-1390
• /
• 2012

In this paper, we propose a robust pupil detection method using rank order filter and pixel value difference in facial image. We have detected the potential pupil candidates using rank order filter. Many false pupil candidates found at eyebrow are removed using the fact that the pixel difference is much at the boundary between pupil and sclera. The rest pupil candidates are grouped into pairs. Each pair is verified according to geometric constraints such as the angle and the distance between two candidates. A fitness function is obtained for each pair using the pixel values of two pupil regions, we select a pair with the smallest fitness value as a final pupil. The experiments have been performed for 400 images of the BioID face database. The results show that it achieves more than 90% accuracy, and especially the proposed method improves the detection rate and high accuracy for face with spectacle.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1507-1510
• /
• 2003

We propose UPGMA(Unweighted Pair Group Method using Average distance) as hierarchical clustering to detect abrupt shot changes using multiple features such as pixel-by-pixel difference, global and local histogram difference. Conventional $\kappa$-means algorithm which is a method of the partitional clustering, has to select an efficient initial cluster center adaptively UPGMA that we propose, does not need initial cluster center because of agglomerative algorithm that it starts from each sample for clusters. And UPGMA results in stable performance. Experiment results show that the proposed algorithm works not only well but also stably.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.187-190
• /
• 2007

This study is for analyzing best band in image matching using correlation coefficient of left and right images of stereo image pair, lot red, green, blue band images separated from color aerial photo and gray image converted from the same color aerial photo image. The image matching is applied to construct Digital Elevation Model(DEM) or terrain data. The correlation coefficients and variation by change of pixel patch size are computed from pixel patches of which sizes are $11{\times}11{\sim}101{\times}101$. Consequently, the correlation coefficient in red band image is highest. The lowest is in blue band. Therefore, to construct terrain data using image matching, the red band image is preferable. As the size of pixel patch is growing, the correlation coefficient is increasing. But increasing rate declines from $51{\times}51$ image patch size and above. It is proved that the smaller pixel patch size than $51{\times}51$ is applied to construct terrain data using image matching.

• Journal of Information Display
• /
• v.6 no.4
• /
• pp.26-34
• /
• 2005

In this paper, a new rectification scheme to transform the uncalibrated stereo image pair into the calibrated one is suggested and its performance is analyzed by applying this scheme to the reconstruction of the intermediate views for multi-view stereoscopic display. In the proposed method, feature points are extracted from the stereo image pair by detecting the comers and similarities between each pixel of the stereo image pair. These detected feature points, are then used to extract moving vectors between the stereo image pair and the epipolar line. Finally, the input stereo image pair is rectified by matching the extracted epipolar line between the stereo image pair in the horizontal direction. Based on some experiments done on the synthesis of the intermediate views by using the calibrated stereo image pairs through the proposed rectification algorithm and the uncalibrated ones for three kinds of stereo image pairs; 'Man', 'Face' and 'Car', it is found that PSNRs of the intermediate views reconstructed from the calibrated images improved by about 2.5${\sim}$3.26 dB than those of the uncalibrated ones.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.542-545
• /
• 2005

Spaceborne radar interferometry has been widely used to estimate the topography and deformation of the Earth. It is difficult to obtain coherent interferometric SAR pairs especially over coastal areas mainly because of variation of surface conditions. We carried out the experiment using a cross-interferometric pair with a perpendicular baseline of about 1.4 km, a 30 minutes temporal separation and the height sensitivity of about 6 meters. The temporal decorrelation can be reduced by the cross interferometric technique with a 30 minutes temporal separation. Accurate coregistration was performed through resampling of ENVISAT ASAR data to equivalent pixel spacing to the ERS SAR data, because of the differences of the pulse repetition frequency and range sampling rate between the two sensors. Then we estimated range and azimuth offset to a sub-pixel accuracy using image intensity cross correlation. A larger window chip size than a general case was used because it was difficult to distinguish typical features. As range bin increased, the difference of Doppler centroid also increased. It resulted in lower coherence in far range than in near range. Coherences over wetland in near and far range were about 0.8 and 0.5, respectively. The coherence was improved by applying azimuth and range common band filtering, but coherence gap still existed. ERS-ENVISAT cross-interferogram usually lost information in urban area. However, high coherence over a city in this pair was shown, because of less man-made structures than other major cities. Accuracy of the DEM constructed by the ERS-ENVISAT 30-minute pair in a coastal area is to be evaluated.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.777-780
• /
• 2003

We have tried to create a vision system like human eye for a long time. We have obtained some distinguished results through many studies. Stereo vision is the most similar to human eye among those. This is the process of recreating 3-D spatial information from a pair of 2-D images. In this paper, we have designed a stereo matching algorithm based on systolic array architecture using edges and pixel data. This is more advanced vision system that improves some problems of previous stereo vision systems. This decreases noise and improves matching rate using edges and pixel data and also improves processing speed using high integration one chip FPGA and compact modules. We can apply this to robot vision and automatic control vehicles and artificial satellites.

• The Journal of the Korea Contents Association
• /
• v.2 no.2
• /
• pp.27-35
• /
• 2002

This paper describes the implementation of cosmetic surgery simulation system by means of the bilinear warping and interpolation using a pair of control points in order to get the information which can be used to compare the before and the after the surgery. If an user provides a pair of control points, first of all, the system determines warping egion using the points and divides the whole region into four subregions which includes the control points as a corner ones. Then, for each subregion, it calculates warping coefficients for backward mapping using the four known comer points of each subregion. Using those calculated coefficients, the system gets the corresponding position of each pixel on the subregion of original image which matches the subregion of resulting image. Finally, a new pixel value is calculated by bilinear interpolation using the closest four pixel values of the position. The same process is applied to the remaining subregions. Through the experiments, we could find natural aesthetic results without any side effects which unnatural aesthetic results without any side effects which unnaturally distort the boundary of warping region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.848-856
• /
• 2004

In this paper, a fast stereo matching algorithm based on pixel-wise matching strategy, which can get a stable and accurate disparity map, is proposed. Since a stereo image pair has small differences each other and the differences between left and right images are just caused by horizontal shifts with some order, the matching using a large window will not be needed within a given search range. However, disparity results of conventional pixel-based matching methods are somewhat unstable and wrinkled, the principal direction of disparities is checked by the accumulated cost along a path on array with the dynamic programming method. Experimental results showed that the proposed method could remove almost all disparity noise and set a good quality disparity map in very short time.

• Journal of the Optical Society of Korea
• /
• v.19 no.5
• /
• pp.531-536
• /
• 2015

This paper presents a new graphical method for selecting a pair of optical glass and housing materials to simultaneously achromatize and athermalize a multilens system composed of many elements. To take into account the lens spacing and housing, we quantify the lens power, chromatic power, and thermal power by weighting the ratio of the paraxial ray height at each lens to them. In addition, we introduce the equivalent single lens and the expanded athermal glass map including a housing material. Even though a lens system is composed of many elements, we can simply identify a pair of glass and housing materials that satisfies the athermal and achromatic conditions. Applying this method to design a black box camera lens equipped with a 1/4-inch image sensor having a pixel width of $2{\mu}m$, the chromatic and thermal defocusings are reduced to less than the depth of focus, over the specified ranges in temperature and frequency.