• Journal of the Korean Wood Science and Technology
• /
• v.35 no.2
• /
• pp.29-38
• /
• 2007

This study was undertaken to investigate the variation of equilibrium moisture content (EMC) in transverse direction and three different directional (longitudinal, radial, and tangential) linear movements, and diffusion coefficients within a tree disc of Korean red pine (pinus densiflora). The EMC gradually increased in heartwood from pith. Therefore, the chemical components might differ even in heartwood and the radial variation in EMC might have a close relationship with the cellulose content within a cross section. The specific gravity increases gradually from pith and the porosity has not direct influence on the variation of EMC within a tree disk. Both the radial and tangential diffusion coefficients exhibited clear trend of increase from pith. The EMC change (${\Delta}EMC$) and tangential diffusion coefficient were close to be axisymmetrical but others were deviated from axisymmetry. The diffusion coefficient decreases with decreasing an activation energy and specific gravity, The diffusion coefficient increased with increasing ${\Delta}EMC$ and hygroscopicity of wood might be inversely proportional to the activation energy, The fJEMC may depend on the chemical constituents of cellulose, hemicellulose and lignin. As the number of sorption sites and sorption capacity of wood increase, therefore, it might be assumed that the hygroscopicity of wood increases while activation energy decreases. Modeling physico-mechanical behavior of wood, the variations should be considered to improve the accuracy.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.828-841
• /
• 2016

Relatively little information is available regarding the correlation between wood and veneer quality, especially for Samama wood, an endemic wood species in eastern Indonesia. This study addresses the quality of 8 years old Samama wood and its effect on the veneer quality. Samama wood quality was determined by evaluating its specific gravity, moisture content, fiber dimensions, and microfibril angle from pith toward bark. Meanwhile, veneer quality was assessed by examining veneer thickness and lathe check characteristics. Geometry factor model was constructed to elaborate the quantities of lathe check from pith toward bark. Results show that fair variations of veneer thickness, ranging from 1.5 mm to 3.0 mm, could be obtained from Samama wood. The quantity, depth, and length of lathe check were noticeably decreasing toward bark. Further, in the same manufacturing process, geometry factor was determined as the dominant factor over other wood properties in affecting the frequency of lathe checks from pith towards bark. These facts should be put into consideration in producing veneer from Samama wood. Moreover, these results enlighten the potential of Samama wood as plywood and other excellent veneer-based products.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.3
• /
• pp.378-387
• /
• 2009

To investigate the effects of sago palm pith (SPP) substitution of corn in the diets on intake, digestibility, rumen fermentation characteristics, nitrogen balance and microbial N Supply, five ruminally fistulated Southern indigenous cattle (mean initial BW = 226${\pm}$5 kg) were randomly assigned to a 5${\times}$5 Latin Square Design to receive five diets, $T_1$ = concentrate with 0% SPP, $T_2$ = 25% SPP, $T_3$ = 50% SPP, $T_4$ = 75% SPP and $T_5$ = 100% SPP, of dietary dry matter, respectively. Plicatulum hay (PH) was offered ad libitum as the roughage. A metabolism trial lasted for 21 days during which liveweight changes and feed intakes were measured. Based on this experiment, there were no significant differences (p>0.05) among treatments groups regarding total DM intake (OMI, NDFI and ADFI) and digestion coefficients of nutrients (DM, OM, CP, NDF and ADF), while total DM intake (% BW) was significantly (p<0.05) higher as higher levels of SPP were incorporated into diets. Rumen parameters (ruminal temperature, pH, glucose, packed cell volume, volatile fatty acid and rumen microorganism populations) were similar among treatments (p>0.05), whereas $NH_3-N$, blood urea nitrogen and molar proportion of propionate concentrations were significantly (p<0.05) higher as higher levels of SPP were incorporated into diets. The amount of N absorption, N retention and microbial protein synthesis were similar among treatments. These results indicate that SPP can be included in diets for Southern indigenous cattle to supply up to 100% of supplemental corn when fed with PH without negative impact on animal performance and it was a good approach in exploiting the use of local feed resources for beef cattle production.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.4
• /
• pp.317-323
• /
• 1993

In order to clarify the contents of active principles in floral inhibition cultured Angelica gigas roots, the amounts of crude extract and the contents of decursin and decursinol angelate in the yearly roots were analyzed and compared with respect to the root age, root part and growth stage. The woody cell, weight and width of pith and cortex were also investigated at different growth stage to observe the developmental characteristics of lignification in the roots as bolting and flowering in normal cultured Angelica gigas. The amount of crude extracts did not differ with plant ages, whereas the contents of decursin and decursinol angelate were differed and the highest in 3 year old roots. The contents of decursin in 1, 2 and 3 year old roots were 3.71, 4.76 and 8.20% and those of decursinol angel ate were 2.84, 3.40 and 5.01%, respectively. The amount of crude extracts, and the contents of decursin and decursinol angelate were the highest in fine roots, followed by the lateral roots and the lowest in the primary roots. On the other hand, the amount of the constituents in the cortex were much higher than those in the pith of the root. The amounts of crude extract, and the contents of decursin and decursinol angelate showed the highest value at the vagetative stage and decreased with development to bolting and blooming stage. Woody cells were accumulated in the pith of the root as advancing growth stage, so that the weight and radius of the pith increased, whereas the relative weight and width of the cortex decreased slightly.

• Journal of Korea Foresty Energy
• /
• v.1 no.2
• /
• pp.1-19
• /
• 1981

In order to investigate biomass yield of one-year-old hyblrid poplars, Pripulusalba x P. glandulosa $F_1$ and Populus nigra var. italica x P. maximowiczii $F_1$clones, as energy and fiber resources, dry matter yield, leaf area, leaf area index, dry matter production ability, specific gravity and fiber length and width were measured. Dry matter yield was 1.89 ton/ha for Poplus alba x P. glandulosa $F_1$ and 3.63 ton/ha for Populus nigra via.italica x P. merximowiczii $F_1$ clones in the planting density of 20,000 trees/ha and in the planting density of 40,000 trees/ha was 3.87 ton/ha for Populus alba x P. glandulosa $F_1$and 5.64 ton/ha for Populus nigra var. italica x P. maximowiczii $F_1$ clones. Leaf area index was 1.24mtim2 in the planting density of 20,000 trees/ha and 2.45 m31m3 in the density of 40,000 trees/ha for Populus alba x P. glandulosa $F_1$ clones and it was 1.96 m21m2 in the planting density of 20,000 trees/ha and 3.36 m21m2 in the density of 40,000 trees/ha for the hybrid $F_1$ Populus nigra var. italica x P. maximowiczii clones. The average specific gravity of the hybrid poplars was 0..36 when bark and pith were included and 0.31 when bark and pith were removed in the plot of 20,000 trees/ha and in the 40,000 trees/ha plot showed 0.35 and 0.31 respectively, for Populus alba x P. glandulosa $F_1$clones. It was 0.36 when bark and pith were included and 0.32 when bark and pith were removed in the 20,000 trees/ha plot and in the 40,000 trees/ha plot was 0.34 and 0.31 respectively for Populus nigra var. italica x P. maximowiczii $F_1$clones. The average fiber length was 0.57 mm in the 20,000 trees/ha plot and 0.58 mm in the 40,000 trees/ha plot for Poplus alba x P. glandulosa $F_1$clones and was 0.60 in both plots of 20,000 trees/ha and 40,000 trees/ha for Populus nigra var. italica x P. maximowiczii $F_1$ clones. There is a big clonal variation among those clones studied, showing high selection potential in both species.

• Journal of Plant Biology
• /
• v.6 no.3
• /
• pp.18-20
• /
• 1963

In order to find the internal characters of Veratrum Genus, we have studied the Veratrum coreanum Loes, fil. (Lilliaceae), V. grandiflorum, and V. Versicolor Nakai f. albidum Nakai. As a results of anatomical view, we found the notable characteristic demarcation at the stele. The Veratrum coreauum Loes, fil. was the best thickened the cell membrane in the pith portion among other species in Korea.

• Proceedings of the Botanical Society of Korea Conference
• /
• 2002.04a
• /
• pp.86-86
• /
• 2002

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.4
• /
• pp.60-63
• /
• 1993

In the present paper, we discribed distributions patterns of pits on the tracheids of Pinus koraiensis. The number of bordered pits on a tracheid is more numerous than that of cross-field pittings. And they appeared different in the number depending on the shape and size of tracheids. Both pit and cross-field pitting on a tracheid is fewer in number near the pith. The number of bordered pits on the tracheid increased rapidly from pith toward cambial zone but that of cross-field pittings increased gradually. The number of bordered pit and corss-field pitting is more frequent in the first-formed tracheid, and the number of bordered pit decreased rapidly from earlywood to latewood but that of corss-field pittings decreased gradually. Bordered pits on a tracheid are more numerous at the end of tracheids and cross-field pittings occur more frequently in the center part of a tracheid.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.2
• /
• pp.191-203
• /
• 2024

Persimmon wood (Diospyros kaki) is a seasonal fruit-producing plant with a beautiful dark pattern in its wood that is suitable for high-quality furniture, sculptures and musical instruments. The utilization of persimmon wood can be improved by determining its anatomical characteristics, such as juvenile and mature wood. This study aimed to determine the boundaries between juvenile and mature wood and observe the anatomical properties of juvenile and mature wood and their variations in the axial direction. Three 30-year-old persimmon (D. kaki) trees grown in Karo, North Sumatra, Indonesia, were used in this study. The boundary between juvenile and mature wood was determined by measuring the fiber length and vessel element length from near the pith to near the bark. Anatomical observations were conducted in the juvenile and mature wood areas. The results showed that the average boundaries between juvenile and mature wood were 44.11 mm from the pith and were not significantly different in the axial direction of the trees. Furthermore, the wood anatomy categories of juvenile and mature wood differed significantly in terms of fiber diameter, fiber proportion, vessel proportion, and axial parenchyma proportion. In the axial direction, vessel diameter, ray parenchyma frequency, and ray parenchyma proportion at the base, middle, and top of the tree were significantly different.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.58-67
• /
• 2014

We investigated the mechanical properties of Korean red pine (Geumgangsong, Pinus densiflora forma erecta Uyeki) of Uljin province in Korea as a basic research to investigated the material properties. Compressive strength of Korean red pine was $36.2N/mm^2$, which was slightly lower than the pine (Pinus densiflora S. et Z.) in Korea. The compressive strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. Bending strength of Korean red pine was $76.5N/mm^2$, which was slightly higher than the pine (Pinus densiflora S. et. Z.) and nut pine (Pinus koraiensis) in Korea. Similar to the compressive strength, bending strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. On the other hand, the shearing strength showed the maximum value at part of including the pith. This result does not coincide with the results of compressive and bending strength, in consideration of the specific gravity, which is consistent. Surface hardness of Korean red pine was $43.7N/mm^2$ in cross section, $12.0N/mm^2$ in radial section and $13.7N/mm^2$ in tangential section respectively. The mechanical properties of Korean red pine were similar to the pine and nut pine having a similar specific gravity. The mechanical properties were greatly affected on the specific gravity than the annual ring width.