• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.807-819
• /
• 2020

The aim of this study was to investigate the anatomical characteristics of Quercus mongolica infested by oak wilt disease. To analysis the anatomical characteristics of the wood specimens infested by the oak wilt, the anatomical structures of an infected wood, a dead wood, and sound wood were observed at 10-year-old intervals from 10 to 50 annual rings using both an optical and a scanning electron microscope. The fiber length was measured in units of 5 annual rings from the pith, and the diameter of the vessel element and the ratio of the vessel including the tyloses were measured for each 10 annual ring. In the cross section, on the infected and dead wood specimens, mycelium was also observed with the tyloses in the vessel. There was no signification difference between the wood specimens in the fiber length and the vessel diameter of the vessel element. The fiber length was not difference after 20-30 annual rings which is a part of juvenile wood. The average of the vessel ratio including tyloses in the infected wood was the highest. Especially, the ratio of tyloses was the highest 40-50 annual rings in the infected wood and the dead wood. Therefore, the large difference between the infested wood by oak wilt and the sound wood was the ratio of tyloses. This result can be used as a basic data to utilize the infested wood.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.327-336
• /
• 2013

Anatomical characteristics of White Jabon (Arthocephalus cadamba) and Red Jabon (Arthocephalus macrophyllus) were investigated by IAWA hardwood feature list. Both species were diffuse-porous, and radial multiple pore with 2~3 rows was mostly observed. Tangential diameter of vessel lumina was 100 to $200{\mu}m$, and vessels per square millimeter were 5 to 20. White Jabon has more vessels than Red Jabon. The number of solitary pore per square millimeter in both species was similar, but more pore multiple was observed in White Jabon. Axial parenchyma diffuse was observed in both species, but axial parenchyma of White Jabon was hardly identified on the cross section. Rays were classified into "body ray cells procumbent with over 4 rows of upright/square marginal cells" type and partly "all ray cells upright and/or square" type on radial section. Ray width 1 to 3 cells and 1 to 2 cells observed in White Jabon and Red Jabon, respectively. Ray height of White Jabon was $420{\mu}m$ and Red Jabon $474{\mu}m$. Fiber length was the range of 900 to $1,600{\mu}m$ in both species, and it showed a tendency to increase from pith to bark. Consequently, it is considered that pore multiple, ray width and axial parenchyma are to be suggested the keys for identification of both species.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.121-135
• /
• 2020

This study aims to evaluate applicability for the continuous drying process using saturated and superheated steam for large-square timber. During drying of the boxed heart square timber, changes in moisture content were examined through the slices of the surface, inner and core layers. The results showed that there was a large moisture content difference between the surface and inner layers during saturated steam drying and between the inner and core layers during superheated steam drying. However, despite the moisture content difference between the layers, no surface check occurred, and an internal check occurred only near the pith or juvenile parts of the wood. The maximum value of the drying stress of the dried larch boxed heart square timber, calculated from the elastic strain of the slice and the tangential elastic modulus of the larch, was 1.30 MPa. The tangential tensile strength of the larch was estimated at 5.21 MPa under temperature and moisture content conditions when drying stress was at a maximum. That is, in the continuous drying process, the saturated and superheated steam did not generate a check in the surface because the drying stress of the wood did not exceed the tangential tensile strength. In further studies, the superheated steam drying conditions will need to be relaxed to suppress the occurrence of internal checks. Such studies would make the continuous drying process using saturated and superheated steam available for the drying of large-square timber.

• Horticultural Science & Technology
• /
• v.32 no.2
• /
• pp.171-177
• /
• 2014

In an effort to investigate special distribution of glucose content of potato tuber of a cultivar 'Superior' after harvest, a whole tuber was longitudinally cut into halves and cut-surface was divided into 11 regions. Approximate glucose concentration of each section was determined using a commercial blood glucose meter. Higher level of glucose was detected in the outer layers of tissue than inner part of tuber although there were lower coefficients of variation value, 37.4% and 34.1% among individual tubers and among defined sections, respectively. A positive correlation between the whole tuber and individual section was existed in glucose content, where the central pith tissue gave the highest coefficient (r = 0.921) and bud end tissue did the lowest (r = 0.544). Glucose content of the tubers stored for 4 months at $2.0^{\circ}C$ was 5.5 fold higher compared to the tubers kept in ambient temperature. The chip color of the former tubers was much brighter than those of the latter tubers. The result obtained in the present study suggests that the blood glucose meter can be used to a rapid and simple evaluation of glucose content and therein be applied to estimate the processing quality of potato tubers during postharvest handling.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.100-106
• /
• 2018

This study was fulfilled to investigate the anatomical characteristics according to provinces. In order to compare anatomical characteristics between provinces we selected Goseong, Hongcheon, and Bonghwa as experimental sites. To use the tree rings formed at the same years we dated all tree rings by cross-dating method used in dendrochronology and the cutting years were successfully dated in 2014, 2012, and 2014 for woods from Goseong, Hongchen, and Bonghwa, respectively. Based on the cutting years tracheid lengths and widths were measured considering juvenile wood (tree rings between the pith and first 10 years), heartwood (tree rings formed between 1955 and 1964), and sapwood (tree rings formed between 2002 and 2011). According to the results about differences between tracheid lengths from three provinces, juvenile wood did not show a difference, statistically, but heartwood and sapwood showed differences as the tracheid lengths following Bonghwa, Hongcheon, and Goseong. Bongwha also showed the largest value in the trachied width among three provinces. The tracheid lengths in the radial direction increased up to around the first 20 years, and then they showed stabilized. All wood samples showed typical Korean red pine's characteristics in anatomical observation under a light microscope.

• Journal of Environmental Science International
• /
• v.5 no.5
• /
• pp.561-567
• /
• 1996

A method for the simultaneous analysis of 31 residual organic chloride pesticides was studied using gas chromatography. Prepared analytical samples were injected to gas chromatography (HP 5890 Series II plus) on the Ultra-2 column with ECD. The packing materials for column were changed as the following reagents ; florisil and alumina N, The residual solution was loaded to column and was elected pith erection solvents ; ether : benzene (2 : 8) solution, hexane : benzene (1 : 1) solution, dichloromethane, acetone, and methanol. The analytical results showed that 6 kinds of organic chlorides were not detected when florisil (first condition) was used as the column packing material. The nondetected 6 kinds of organic chlorides in the first analytical condition were detected and the recoveries of thrin-pesticides were increased, in particular, captan and captafol, but the recoveries of benzene hexachloride compounds were decreased when dichloromethane and methanol were added as elution solvents (pac'king material was florisil as in the first condition). The recoveries of dichlornuanid, chlorofenvinfos, folpet, and dicofol were increased and that of aldrin was increased, but those of captan and captafol were not good when alumina N was used as the packing material. To detect simultaneously thrin-pesticides, captan, and captafol, florisil and alumina N were used as the packing materials. The elution result showed that captan and captafol were not detected. This was because the column was activated insufficiently. The analytical method was the best (31 kinds of organic chlorides in the residual pesticides were detected sharply and showed high sensitivity) when the column (packing materials were florisil and alumina N: together) was fuliy activated and the impurities were removed using various elution solvents.

• Journal of Korean Society of Forest Science
• /
• v.42 no.1
• /
• pp.67-73
• /
• 1979

In order to observe the anatomical phenomena of root formation in the hypocotyl cuttings of maples, the hypocotyls of Acer palmatum. Acer micro-sieboldianum, and Acer saccharinum were used as the materials. The rooted portions were sectioned by a microtom and doubly stained by safranin and fast green. The results obtained are summarized as follows; 1. A cross section structure of hypocotyl cuttings of Acer sp. is consist of epidermis, cortex, vascular bundle and pith from the outside. The vascular bundle makes circular shape forming polyarch in A. saccharinum and tetrarch in both A. palmatum and A. micro-sieboldianum. 2. An adventitious root of A. saccharinum originated in phloem parenchyma, while that of A. palmatum and A. micro-sieboldianum originated in interfascicular parenchyma related with phloem cells. 3. The hypocotyl cuttings of Acer sp. is commonly composed of parenchyma tissue having vigorous differentiation capability. Therefore, the originated root grow easily through the cortex and epidermis breaking their tissues.

• Journal of Korean Society of Forest Science
• /
• v.79 no.1
• /
• pp.1-15
• /
• 1990

In this study the stem analysis program, which can be operated with personal computer was developed to reduce time and cost of calculation, and to increase accuracy of analysis. The stem analysis method used in this program was compared with other methods. The results obtained were as follows : The value, 1/100mm measured from the latest annual ring measurement machine (Jahrringme${\beta}$geraete Johan Type II) was automatically inputed to the computer and saved into given file name. Turbo Pascal program was written to do this. The measured data was analyzed by stem analysis calculation program written by Fortran-77. Volume and height increments were approximated by spline function, and diameter of the stem disk was calculated by quadratic mean method. The increment values calculated by the programs were printed annually and in every five-year. Stem analysis diagram and several increment graphs were also easily printed. The result compared between those analysis methods showed that quadratic mean could reduce the error caused from eccentric pith. When the stem taper curve method, approximated by spline function, was used in the calculation of tree height and volume, increments would be more exactly calculated.

• Korean journal of applied entomology
• /
• v.20 no.2 s.47
• /
• pp.98-102
• /
• 1981

For the investigation of seasonal fluctuation of immature (lavae and pupae) beanfly, infestation rates, and habit, several soybean-cultivars were planted at Kumgok Experiment Farm of KAERI by three different planting times at 25-day intervals. Infestation rates of beanflies were ranged from $85\%\;to\;100\%$ in accordance. with the planting dates, where an increase in infestation rate was found with delay in planting dates. Immature beanflies were already observed from lune 20 by plant dissection counts. Three peaks of the seasonal fluctuation of lava were shown by occurring on July 10, August 10 and 50 during the soybean cultivation, while two peaks of pupal appearances were found. The most high peaks of lavae and pupae occurred on August 10 and 30, respectively. The lava were habitable in the pith or cortex tissue of soybean stem. They prepared tiny hole on the axilla as well as the internode of stem, and then they pupated in the holes from which the adults are able to escape. Immature beanfly seemed to prefer invading to the underground part of the stem when the soybean plants were in young stage.

• Journal of Forest and Environmental Science
• /
• v.7 no.1
• /
• pp.1-6
• /
• 1990

This study was performed to investigate the variation of tracheid length, ray spacing per mm and ray height of major coniferous woods (Picea jezoensis, Abies sachaliensis, Pinus koraiensis, Pinus sylvestris and larix gmelini)grown at Sivelian forest of USSR. The results of the study are as follows: 1. The averaged mean values of tracheid length are respectively $3550{\mu}$ on Pinus koraiensis, $3440{\mu}$ on Abies sachaliensis and Larix gmelini, $2900{\mu}$ on Picea jezoensis, and generally this values of Sivelian coniferous wood are more longer than Korean samewood. 2. The tracheid length on sapwood is more larger than heartwood and this values on latewood are also larger than earlywood. 3. The averaged mean values of ray height are respeetively 14.5 on Larix gmelini, 13.5 on Picea jezoensis and Pinus sylvestris, 9.7 on Pinus koraiensis, and this values of Sivelian coniferous wood are more larger than Korean samewood. 4. Ray height is comparatively small near the pith and tend to be increased to bark of wood. 5. The avereged values of ray spacing per mm are respectily 7.9-8.3 on Larix gmelini and Picea jezoensis, 7.1 on Abies sachaliensis, and 6.1-6.2 on Pinus koraiensis and Pinus sylvestris.