• 설비공학논문집
• /
• 제27권9호
• /
• pp.491-496
• /
• 2015

Generally, the phase of the refrigerants that circulate in air-conditioning systems is repeatedly changed from liquid to gas and from gas to liquid. In vapor-compression refrigeration, the refrigerant at the inlet of the evaporator is in a gas-liquid two-phase state; therefore, to enhance the heat-transfer performance of the evaporator, the even distribution of the refrigerant across multiple passages of the evaporator is essential. Unlike the distribution of a single-phase refrigerant, multi-phase distribution requires further considerations. It is known that the multi-phase distribution at the outlet of the distributor is affected by factors such as the operating condition, the distributor's shape, and the insertion depth of the outlet pipes; here, the insertion depth of the outlet pipes is especially significant. In this study, for a cylindrical distributor with a 90-degree bend entrance and three outlet pipes, the flow uniformity at the outlet pipes was numerically tested in relation to variations of the insertion depth of the outlet pipes.

• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.655-663
• /
• 2011

Asbestos-cement is a material with valuable strength and durability. It was extensively used for water distribution pipes across the world from the 1950s until the early 1980s. The network of pipes in this case study dates from the 1970s, and after more than 30 to 40 years of service, some pipes have been found to break under common service pressure with no apparent reason. A set of mechanical tests was performed including bending, compression, pressure and crushing tests. Microscopy analysis was also used to understand the material behaviour. Tests showed that there was a clear loss of strength in the pipes and that the safety factor was under the established threshold in most of the specimens. Microscopy results showed morphological damage to the pipes. The loss of strength was attributed to a leaching effect. Leaching damages the cement matrix and reduces the frictional interfacial shear stress.

• 한국기계가공학회지
• /
• 제18권9호
• /
• pp.64-71
• /
• 2019

We herein propose a systematic design method of hydraulic pipes used in heavy construction equipment. We found that even though many design studies have been conducted regarding major hydraulic components such as pumps, cylinders, and control valves, studies regarding the optimal design of hydraulic pipes are scarce. In this study, the design of four types of pipes is considered: two high-pressure and two low-pressure pipes. First, fluid flow analysis was conducted based on oil flow and pressure for various radii of curvature. For a check-valve pipe, we considered the location of an inlet pipe. We could visualize fluid flow inside the pipe according to the flow velocity and pressure distribution. Based on fluid flow analysis, we conducted a structural analysis that revealed the stress distribution and concentration for each pipe design. We selected the best design parameters for each pipe design, fabricated the pipes, and subsequently tested them for validity.

• Computers and Concrete
• /
• 제11권5호
• /
• pp.441-462
• /
• 2013

When using the conventional finite element method, a great number of grid nodes are necessary to describe the large and uneven temperature gradients in the concrete around cooling pipes when calculating the temperature field of mass concrete with cooling pipes. In this paper, the temperature gradient properties of the concrete around a pipe were studied. A new calculation method was developed based on these properties and an explicit iterative algorithm. With a small number of grid nodes, both the temperature distribution along the cooling pipe and the temperature field of the concrete around the water pipe can be correctly calculated with this new method. In conventional computing models, the cooling pipes are regarded as the third boundary condition when solving a model of concrete with plastic pipes, which is an approximate way. At the same time, the corresponding parameters have to be got by expensive experiments and inversion. But in the proposed method, the boundary condition is described strictly, and thus is more reliable and economical. And numerical examples were used to illustrate that this method is accurate, efficient and applicable to the actual engineering.

• 한국압력기기공학회 논문집
• /
• 제15권1호
• /
• pp.40-45
• /
• 2019

Unlike the welded pipes in the primary system of light water nuclear power plants being periodically inspected with in-Service inspection program, relatively small pipes with the outer diameter less than 2 inch have not been regularly inspected to date. However, after several failure reports on the occurrence of critical crack-like defects in small pipes, inspection for the small pipes has been more demanded because it could cause the provisional outage of nuclear power plants. Nevertheless, there's no particular method to examine the small pipes having access limitations for inspection due to various reasons; inaccessible area, excessive radiation exposure, hazardous surrounding, and etc. This study is to develop a reliable inspection technique using torsional and flexural modes of guided wave to detect defects that could occur in inaccessible area. The attribute of guided wave that can travel a long distance enables to inspect even isolated range of the pipe from accessible location. This paper presents a case study of the evaluation test on 3/4" small-bore pipes with guide wave method. The test result demonstrates the crack signal behavior and assures possibility to detect the crack signal in a flexural mode, which is clearly distinguishable from the symmetric structure signal in a torsional mode.

• Structural Engineering and Mechanics
• /
• 제86권6호
• /
• pp.751-764
• /
• 2023

In practical engineering such as aerial refueling pipes, the boundary of the fluid-conveying pipe is difficult to be completely immovable. Pipes under movable and immovable boundaries are controlled by different dominant nonlinear factors, where the boundary mobility will affect the nonlinear dynamic characteristics, which should be focused on for adopting different strategies for vibration suppression and control. The nonlinear dynamic instability characteristics of functionally graded fluid-conveying pipes lying on a viscoelastic foundation under movable and immovable boundary conditions are systematically studied for the first time. Nonlinear factors involving nonlinear inertia and nonlinear curvature for pipes with a movable boundary as well as tensile hardening and nonlinear curvature for pipes with an immovable boundary are comprehensively considered during the derivation of the governing equations of the principal parametric resonance. The stability boundary and amplitude-frequency bifurcation diagrams are obtained by employing the two-step perturbation- incremental harmonic balance method (TSP-IHBM). Results show that the movability of the boundary of the pipe has a great influence on the vibration amplitude, bifurcation topology, and the physical meanings of the stability boundary due to different dominant nonlinear factors. This research has guidance significance for nonlinear dynamic design of fluid-conveying pipe with avoiding in the instability regions.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.295-303
• /
• 2022

Residential heating systems in South Korea are largely based on the use of ondol pipelines. Heat is transferred to the floor by passing hot water through a metal or plastic pipe buried within the concrete of the floor. Consequently, it is difficult to clean the inside of these pipes after installation. Over time, foreign substances such as scale accumulate in the pipe when the ondol heating method is used for an extended period. Therefore, in the past, pipes were cleaned by removing foreign substances attached to the inside surfaces of the pipes using high-pressure water or by disassembling the pipes and removing foreign substances with chemical agents. Recently, a method for removing foreign substances through the cavitation effect of ultrasound has been proposed. This idea might lead to the development of new technologies for cleaning pipe interiors. Consequently, this study investigated the use of ultrasound to clean pipes embedded in concrete. In this study, devices that generated ultrasonic waves with various frequencies and directions were prepared. After preparing arbitrarily contaminated pipes, the appropriate frequency, output strength, and output direction for each foreign substance were determined through repeated experiments. The results of this experiment could provide important information for future methods of cleaning the interior of ondol piping systems.

• 한국수학사학회지
• /
• 제5권1호
• /
• pp.81-95
• /
• 1988

In Akhakkyebom(낙학궤범), one of the greatest Korean Sources, a great mistake was found in the lengths of the pitch pipes. Whanjong(황종) from which the other eleven pitches are calculated, is nine inches by decimal system. But the rest are from 9inches by nonary system. To find out how such a contradictory combination could put into so great a book, all the sources available wereexamined. In the process of investigating the numeral change of the lengths of the pitchpipes, it was found that fixation of this contradictory combination was due to the tradiction of Confucianism, which is specialized by its adherence of the old. SongHyon(성현) couldn't understand well enough Tsai Yuan-ting's(몽원정) Account of the science of the pitch pipes in Lu-luhsin-shui(율여신서), Neither could Yi Hye-gu(이혜구) who translated Akhakkwebom(낙학궤범) into Korean. The parts they misunderstood were pointed out and explained as it should be in this thesis. Several other accounts of the science of the pitch pipes like Chu Tsai-yu's and Jing Farng's are also explained. The Pitch-pipes which were said to have been made by Pak Yon(박연) were found out to be of Chu Tsai-yu's. Those which Yi Sang dok(이상덕) wrote were one of Pak Yon's achievements turned out to be of Tsai Yuen-ting's(몽원정), And othe interesting mistakes were pointed out in thesis thesis. Most of these mistakes were made, I think, because of the lack of the study on the historical background. That's why I tried to examine all the sources available on pitch-pipes. In the lengths of the pitch-pipes preserved in Shih-chi(사기) by Ssu-ma Ch'ien(사마천), several letters were found to have been misprinted. Some 칠's should be “십” and the letter “일” in Hyopchong(황종) should be “칠”. I couldn't deal with all the lengths of the pitch-pipes in this thesis. Especially the real length of the old measure of Whangjong(황종) made by PakYon(박연) is remained still unknown. I believe a lot more study should be poured on this field to know our traditional music as it was.

• 대한기계학회논문집A
• /
• 제36권3호
• /
• pp.313-318
• /
• 2012

캐나다형 중수로에서 피더관은 중수로 압력관에 중수를 공급하고 가열된 중수를 증기발생기로 보내는 배관으로 가동 중에 유동 가속 부식현상에 의해 감육이 발생한다. 배관에 감육이 발생하게 되면 배관의 건정성이 떨어진다는 결과는 앞선 연구에서 확인하였다. 본 논문에서는 45 도와 60 도의 굽힘각도를 갖는 피더관의 한계하중을 제시하고 제시된 연구결과를 바탕으로 임의의 굽힘각도를 갖는 피더관에서 감육이 발생했을 경우의 한계하중을 예측 할 수 있는 식을 제시하였다. 본 연구에서는 유한요소 해석을 통하여 굽힘 하중과 내압을 받는 경우에 대하여 연구를 진행하였고 특히 굽힘 하중의 경우 면내 열림 방향과 면내 닫힘 방향으로 나누어 진행하였다. 재료는 대변형 효과를 고려하고 탄성-완전소성 재료로 가정하였다.

• 한국강구조학회 논문집
• /
• 제23권5호
• /
• pp.569-579
• /
• 2011

지역난방 시스템의 주요 구성요소의 하나인 열배관은 크게 공급관과 회수관으로 구분되며, 지역난방에서의 열수송 배관은 난방수의 온도변화에 따른 열응력을 받게 되므로 공용년수 증가에 따라 열응력에 의한 피로현상이 발생하게 된다. 한편 지역난방 열배관은 사용자배관의 공용조건에 따라 다양한 특성을 나타내며 이러한 불규칙한 온도변화는 열배관의 피로에 악영향을 미치게 된다. 따라서 본 연구에서는 기 매설된 공용중인 지역별 열배관에 대해 현장계측을 실시하고 각 지역의 데이터를 분석하였다. 또한 사이클기반 피로평가법 및 응력기반 피로평가법을 통하여 지역난방 열배관의 피로안전성을 평가하였다.