• Journal of Advanced Marine Engineering and Technology
• /
• 제39권8호
• /
• pp.849-855
• /
• 2015

A better flow condition for the intake of pump is provided by the sump pump that connects the forebay to the intake of the pump station. If the suction sump is improperly shaped or sized, air-entraining vortices or submerged vortices may develop. These phenomena may greatly affect pump operation if vortices become sufficiently large. Moreover, any remaining vortices in the pump flow passage may result in an increase in the noise and vibration of the pump. Therefore, the vortices in the pump flow passage must be reduced to achieve good pump sump station performance. In this study, the effect of suction pipe leaning angle on the pump sump's internal flow is investigated. Additionally, a pipe type with an elbow shape is investigated. The results show that the air entraining vortices occur under the condition of a water level ratio H/D = 1.31 for each suction pipe type.

• 대한조선학회논문집
• /
• 제46권3호
• /
• pp.290-302
• /
• 2009

Pipe system widely used in a ship is usually attached to the hull of a ship, and its vibration lead to structure-borne noise. Rubber mount is usually used as a vibration isolator of a pipe in a ship. In this paper, the effects of several factors, besides the stiffness and damping of the rubber mount, on vibration-isolating performance are taken into consideration. The parameters considered in this paper are hardness of the rubber material, painting on the rubber and deformation from clamping. Through the results of parametric study, the effective specifications of rubber mount are suggested to improve vibration-isolating performance. The performance under fluid flowing condition is calculated numerically and verified experimentally.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.175-180
• /
• 2008

This paper is dedicated to the development of cooling devices such as mLHP with Fan-Fin system limited by noise and vibration. As we know, Heat pipe has the limitation of cooling capability to cool down the electronics. It is bounded by capillary and thermal limitation but heat load that it has to deal with is increasing. Especially Today's electronic technology has a tendency to integrate lots of function into the small piece of a processor like Dual core having 35W heat load for mobile and desktop computer respectively. There is an optimum operating condition of temperature, below $70^{\circ}C$, during the maximum heat load, 35W. There is the motivation needed to develop the new type of cooling devices and we can discuss about the new challenge beyond heat pipe.

• 설비공학논문집
• /
• 제4권2호
• /
• pp.96-105
• /
• 1992

The objective of this paper is to study experimentally on the noise characteristics of supersonic jet from multihole orifice in the range of jet pressure from $at_g$ to $at_g$ in the reverberation room. At first, the single orifice jets are investigated for various hole diameter from 3.8mm to 10mm. Through the noise spectrum, the turbulent mixing noise and the shock associated noise is analyzed. The noise for confined jets into a tube of diameter 30mm or 90mm with length 2m is investigated in comparision with that for the free jets. The sound power level is measured and compared with thoretical models for free jet. At second, multihole orifice jets are investigated to study the effect of multijet on noise reduction. The spectrum and power level of multijets are measured and compared with single jets. The multi-jets in a confined pipe are also investigated. It is found that the noise spectrum is significantly altered by increasing the number of jet with decrease in jet diameter and also by confining the jet into tube.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.676-681
• /
• 2001

We usually divide the noise of exhaust system into pulsation noise and flow noise. Pulsation noise is the shock wave to occur when the burning gas of low pressure emits and include harmonic having basic frequency as the exhaust cycle of engine. Flow noise is the noise that is produced when gas flow emits into the atmosphere through the pipe and has the character of frequency like pink noise which has the high level of high frequency component. A muffler is divided into reflective type and absorptive type. We usually use the muffler compounding the property of them. In this study, it is the case of transfer matrix method that a muffler is compounded to analyze the elements of each section according to sound wave's proceed direction. But we use simple model. So, we use finite element method that takes short time to analyze. Acoustic analysis gives us transfer matrix to use FEA of SYSNOISE and we use STAR-CD for fluid analysis. We made database that is based on analytical results about the muffler of expansion type, extended type, offset type, reverse type, and perforated type and developed the muffler design system to perform work efficiently.

• 대한기계학회논문집A
• /
• 제36권9호
• /
• pp.1103-1108
• /
• 2012

주증기관은 보일러와 터빈을 연결하는 주요계통이다. 운전조건으로 인한 배관시스템에 손상을 제한 할 수 있기 때문에 수격현상 해석은 중요하다. 배관시스템의 불안정한 유동에 의해 생성되는 수격현상은 압력의 과도한 변화, 진동 및 소음을 일으킬 수 있다. 주증기관 구조는 운전환경아래 압력맥동 및 여러 진동 등을 안전하게 견딜 수 있도록 설계되어야 한다. 본 논문에서는 정지 및 정상 운전기간 동안 배관에 유입되는 수격현상을 과도조건에 적용하여 ASME 피로수명 방법론과 유한요소해석에 따라 주증기관의 구조건전성을 평가하였다. 계산된 교번응력 및 피로응력 평가 결과, ASME 피로수명의 허용요건을 만족하였다.

• 해양환경안전학회지
• /
• 제29권5호
• /
• pp.512-519
• /
• 2023

소음공해는 인간과 해양환경에 악영향을 끼치며, 선박과 해양구조물에서 발생하는 유동소음을 예측을 통해 소음에 대한 안전성을 평가하고 해양환경을 보존할 수 있다. 기존 수중구조 유동소음 해석기법은 전산유체역학과 FW-H음향상사식을 이용한 하이브리드법 기반이다. FW-H는 무한공간에서의 음향전파를 가정하여 소음해석을 수행하기 때문에 음파의 반사와 산란, 회절의 영향이 나타나는 근접장 해석이 제한적이다. 반면 격자볼츠만기법 기반의 직접법 유동소음해석을 수행하면 근접장 음향효과를 소음해석에 반영할 수 있다. 직접법 해석은 유동과 소음이 연성된 해석이 수행되고 구조경계에서의 반사와 회절, 유동에 의한 매질 불균일성에 따른 산란효과가 반영된다. 그간 격자볼츠만기법이 수중조건에서 수치적으로 불안정하여 수중환경에 적용이 불가능했다. 하지만 수중환경에서 사용할 수 있는 DM-TS 격자볼츠만기법 충돌연산자가 개발되어 수중으로 확장이 가능해졌다. 본 연구에서는 파이프내 원형구멍에 대하여 격자볼츠만기법 해석을 수행해 수중 유동소음해석이 가능함을 보였다. 격자볼츠만기법 해석을 통해 도출한 유동과 소음을 각각 실험과 비교하여 해석의 신뢰도를 확보하였다. 파이프내 유동소음에 의한 주요 압력 피크가 해석에 반영되었으며 이를 통해 격자볼츠만기법을 이용한 근접장 유동소음해석이 가능함을 확인했다.

• 화약ㆍ발파
• /
• 제25권2호
• /
• pp.23-33
• /
• 2007

터널발파작업에 따른 발생소음의 크기는 소음 계측기의 특성상 근거리의의 측정이 불가하며 방음재질의 종류에 따라 소음저감 효과는 매우 다양한 차이를 나타낸다. 본 연구에서는 터널발파작업에 따라 설치되는 방음시설의 방음재질과 종류에 따른 소음저감 효과와 근거리에서의 소음예측방법을 조사하였다. 방음재질과 종류에 의한 소음과 주파수의 크기를 비교 분석하기 위하여 콘크리트 흄관 내에서 화공품의 일종인 폭죽으로 소음을 발생시키고 약 20여 종류의 방음재질을 설치하여 근거리에서 소음과 주파수의 크기를 측정 고찰하였다.

• 한국소음진동공학회논문집
• /
• 제23권8호
• /
• pp.770-776
• /
• 2013

Fluid-borne noise produced by seawater circulating pumps propagates through the seawater connected pipes and radiates from the hull opening of a ship. This noise causes the increases of underwater radiated noise and self noise of ship. To reduce the noise propagation through the seawater connected pipes, absorptive silencer must be needed. In this paper, theoretical model to analyze the transmission loss of absorptive silencer was presented and the design parameters of absorptive silencer were verified. Theoretical calculations were performed according to a thickness, a length, an internal pressure and mechanical properties of its absorptive material in order to analyze the characteristics of absorptive silencer. From the theoretical calculation results, the absorptive silencer was manufactured and transmission loss was measured in the test facilities. The results of theory and measurement are compared and discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.913-917
• /
• 2007

The turbocharger for a vehicle is consisting of a centrifugal compressor and turbine. These compressor and turbine are vibrating and emitting noises through the T/C body, exhaust system (Catalyst, Bellows, Pipe, etc) and Intake system (Hoses, Intercooler pipes, Intercooler) as rotating. A turbocharger cold test bench is constructed to reduce these noises, especially for the purpose of realizing transient operating environment and oil temperature control to simulate the vehicle operating characteristics with intake system and exhaust system. This research laid the groundwork to develop a lower noise level T/C through understanding the mechanism of the noise source of T/C.