• Journal of the Korean Wood Science and Technology
• /
• 제42권6호
• /
• pp.666-674
• /
• 2014

국산 침엽수재의 용도확장을 위해 열압밀화를 실시하여 압축세트량에 따른 역학적 성능을 조사하였다. 열압밀화 공정에 의해 시험편의 밀도가 크게 향상되었다. 50% 압축 시 대조군 대비 잣나무재가 약 71%, 소나무재가 약 74%, 낙엽송재가 약 76%의 밀도가 증가되었으며, 압축세트량 증가와 함께 시험편의 재질이 균일해진다는 것을 내부밀도분포 분석을 통해 알 수 있었다. 열압밀화에 따른 역학적 성능의 변화는 대조군 대비 50% 압축 시 잣나무재의 경우, 종압축강도가 76%, 휨강도가 83%, 표면경도가 55% 증가하였다. 소나무재는 종압축강도가 69%, 휨강도가 130%, 표면경도가 76% 증가되었다. 낙엽송재의 경우 종압축강도가 77%, 휨강도가 120%, 표면경도가 44% 증가되었다. 국산 침엽수 열압밀화재의 강도성능은 일반적으로 낙엽송재가 가장 높고 잣나무재가 가장 낮았다. 그러나 열압밀화에 의한 강도성능의 증가율은 소나무재가 가장 높았다.

• 한국가구학회지
• /
• 제22권4호
• /
• pp.270-277
• /
• 2011

This study aims to find new solutions to the problem of utilization of materials and techniques represented in the development of modern lighting design. LED is an important component in modern lighting design and pine tree is one of the most popular domestic wood in furniture design in Korea. In this study, design is developed into various types of furniture such as a table, a chest, and a lighting, by researching manufacturing process and examining the use of slicing pine tree. The technique of slicing pine tree is a simple linear arrangement that was traditionally used in wooden furniture in Lee dynasty, with an emphasis on repetitive rhythm. The slicing technology is used to expand the usage of domestic pine tree. The beauty of natural wood is expressed with the transmission of light by applying this technique to the lighting design. It also brings new communication in between artificial lighting and natural wood combining this traditional technique and LED lighting in design. Finally, this study suggests particular value through the convergence of analog and digital by using the traditional wooden technique that keeps natural wood prints and new digital technology by using LED lighting. More discussions and research about this subject are expected continuously through this study.

• 한국균학회소식:학술대회논문집
• /
• 한국균학회 2006년도 추계학술대회 및 정기총회
• /
• pp.13-15
• /
• 2006

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.71-73
• /
• 2008

Different biosolid fuel (wood pellet) properties between trunk and root of pine (Pinus densiflora) biomass were investigated. Trunk has more organic solvent extracts and Klason lignin content which has higher heating values than root biomass component. In root biomass, polysaccharides content was higher than trunk biomass. Based on Higher Heating Value (HHD) analysis and ash content, trunk biomass showed better solid fuel characteristics than root biomass. But pine root biomass had lower HHD than trunk biomass, its HHD values were higher than other hardwood or annual plant lignocellulosic biomass.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.34-42
• /
• 1998

Three hardwood (ash, alder and black locust) and three softwood (Japanese red pine, radiata pine and Western hemlock) specimens were dried in microwave(MlW) oven and their drying rates were obtained. Their specific permeabilities were also measured by using a modified liquid permeability measuring device. The correlation between the M/W drying rates and permeabilities of six species were statistically analyzed. It was revealed that within a species there is a logarithmic relationship between the M/W drying rates and average moisture contents and that among species there is a linear relationship between the M/W maximum drying rates and the average specific permeabilities. A exception was Western hemlock, which was of low permeability and of high drying rate. A Me-time equation, which showed a good agreement with the actual data, was derived. Thus using this equation the moisture contents of wood and the drying end points of M/W drying could be predicted. Infrared images of the thermal distribution in wood were illustrated.

• Journal of the Korean Wood Science and Technology
• /
• 제19권3호
• /
• pp.19-26
• /
• 1991

This study was carried out to investigate the solid wood bending properties of red pine(Pinus densiflora S. et Z.)naturally grown in Korea by boiling treatment The specimens were green and their dimension was $15\times15\times350mm$. The optimum conditions for solid wood bending processing of pine lumber are shown in Table 6 and the minimum solid bending radius was 240 mm in boiling treatment. The effects of knot on the degradation of bending processing properties were very severe and the failures of diagonal and torn grained wood were 20% and 30% respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.896-906
• /
• 2020

Wood deterioration experiments were carried out for 6 months in an intertidal zone of South Korea to monitor the changes in the chemical properties of two types of species, Korean red pine and sawtooth oak. The results of FT-IR spectra and XRD patterns have shown that the chemical properties of the wood did not change significantly during the 6-month burial period. However, the brightness of the surface decreased after burial; the value of the sawtooth oak sample was lower than that of the Korean red pine sample owing to an accumulation of inorganic compounds in cell lumen as observed by ICP analysis. Among the inorganic compounds, sodium and sulfur concentrations increased significantly over the burial period compared with the control. Further, the maximum moisture content decreased from 199% to 136% in the Korean red pine and 62% to 60% for the sawtooth oak. Nevertheless, the major chemical composition of both the wood species did not change significantly during the 6-month burial period, whereas, the crystallinity decreased with an increasing burial period owing to an accumulation of inorganic compounds in the lumen.

• Journal of the Korean Wood Science and Technology
• /
• 제17권2호
• /
• pp.65-73
• /
• 1989

Steam explosion process is an efficient pretreatment method for sparating and utilizing wood main components has attracted attention in utilization of ligno-cellulosic biomass. In order to obtain the effective pretreatment condition. this study was made explosion apparatus. examined the composition. extraction of exploded wood. Wood chips of pine(Pinus densiflora oak (Quercus serrata) and birch wood (Belula platyphylla var. japonica) were treated with a high pressure steam(20-30 kg/$cm^2$, 2-6 minutes). The results can be summarized as follow; In analysis of exploded wood(EXW). It was found arabinose residues rapidly decreased with increasing of steaming time and pressure. Extractives of EXW with sodium hydroxide increased with increasing of steaming-time and- pressure especially extractives 1% sodium hydroxide has higher than other extracted method extractives of hard wood(oak, birch) has higher than pine wood. In EXW extracted with sodium hydroxide and methanol lignin was partially delignified alkali extraction was more delignified than methanol extraction hardwood than pine wood.

• Journal of the Korean Wood Science and Technology
• /
• 제41권3호
• /
• pp.221-233
• /
• 2013

본 연구에서는 중심부분 엔드코팅처리가 소나무와 잣나무 중목구조부재의 고온저습건조에 미치는 영향을 알아보기 위해 수행되었다. 건조에 소요된 시간은 총 268시간 이었으며, 최종함수율은 소나무의 경우 정각기둥재와 원주기둥재 모두 9.2~10.8%, 잣나무 정각기둥재 15.0~22.0%, 원주기둥재 12.8~20.4% 범위로 조사되었다. 소나무재의 경우 함수율 분포가 균일한 반면, 잣나무재는 부분적으로 고함수율 부위가 존재하였다. 재면할렬은 잣나무가 더 많이 발생되었으며, 부분엔드코팅처리는 재면할렬 예방에 큰 효과가 없는 것으로 조사되었다. 내부할렬은 두 수종 모두에서 발생되었다. 표면경화율은 소나무재 3.7~9.1%, 잣나무재 20.9~35.8%로 경미한 크기의 잔류응력이 존재하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제51권1호
• /
• pp.23-37
• /
• 2023

One type of biomass that has promising potential for bio pellet production is spent coffee grounds (SCGs). However, previous studies have shown that SCGs in bio pellets cause a lot of smoke. Therefore, they need to be mixed with a material that has a higher calorific value to produce better quality pellets. One material that can be used is pine wood because it has a natural resin content that can increase the calorific value. The aim of this study was to examine the quality of bio pellets produced with SCGs and pine wood charcoal at different particle sizes. The charcoal was ground using either a hammer mill (HM) or a ball mill (BM). Pine wood charcoal was mixed with SCGs at ratios of SCGs to pine wood charcoal of 4:6 and 6:4 by weight, respectively, and the adhesive used a tapioca with a composition ratio 5% of the raw material. The bio pellets were produced using a manual pellet press. The quality of the bio pellets was assessed based on Indonesian National Standard (SNI) 8021-2014, and the physical observations include flame length, burning rate, and compressive strength. The average water content, ash content, and calorific value of the bio pellets were in accordance with SNI 8021-2014, but the density and ash content values were below the standard values. The BM variation of bio pellets had a higher compressive strength than the HM variation, and the 4:6 BM variation had the longest burning time compared with 4:6 HM.